View Warnings
View Table of Contents
Options not selected: setld
Arguments to sys_check script: none
The sys_check script makes suggestions and recommendations that must be validated by administrative or support personnel before being implemented.
Note: Documentation links in this output are to the V4.0F documentation. This may not be accurate to older or newer releases of the operating system.
Note: Some Web browsers do not have enough memory to hold all of the links in this file, which may result in some empty links. If this occurs, you can increase the browser's memory cache size or use the scroll bar to view all the sections.
The sys_check script gathers system configuration information and performs checks of many system parameters and subsystem attributes. It can be used by system administrators to understand and tune the system, and it also provides consolidated information to service personnel.
Important information about Compaq Tru64 UNIX can be found in the online documentation: http://www.unix.digital.com/faqs/publications/pub_page/pubs_page.html.
In addition, Compaq provides information on the following WWW pages on the Internet:
Warning: Patch kits have not been installed.
Operational: Check the values of ubc-maxpercent, ubc-minpercent,
ubc-borrowpercent, vm-ubcdirtypercent, vm-ubcseqpercent, and
vm-ubcseqstartpercent settings.
One or more of these attributes is not set correctly.
Tuning Suggestion: Change the value of vm-mapentries ( 200 ) to 16384.
Tuning Suggestion: Change the value of vm-vpagemax ( 16384 ) to 131072.
Operational: Increase the value of maxusers ( 32 ) to at least 128.
Operational: Very large number of files were found in the /tmp ( 480 ) directory.
Operational: Monitor error log entries.
Warning: DECevent is not installed.
Tuning Note: Monitor disk performance statistics.
Operational: Missing entry for scsi vendor QUANTUM in /etc/ddr.dbase.
Operational: Missing entry for scsi vendor PLEXTOR in /etc/ddr.dbase.
Note: LSM is not being used on the system.
Operational: There are one or more incorrect /etc/fstab file entries.
Tuning Suggestion: Put /tmp on its own file system, instead of on the root file system.
Tuning Suggestion: The namei cache hit rate is low ( 70 %). You may want to increase the size of the namei cache ( 1029 ).
Tuning Suggestion: UFS/CDFS file systems are not being used.
Operational: defragcron is not enabled.
Operational: The /etc/vdumpdates file is missing or empty.
Operational: Use the userquota and groupquota mount options with all read write AdvFS file systems in /etc/fstab, even if quotas are not enforced.
Tuning Suggestion: Adjust AdvfsPreallocAccess to a value within the 448 to 896 range.
Operational: Device name for disk btl 1 2 0 rz10 does not exist
The operating system name and version (uname -a):
OSF1 node3.wickensonline.co.uk V4.0 1530 alpha
The running kernel file name is /vmunix.
Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007
/etc/motd
Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 The installation software has successfully installed your system. There are logfiles that contain a record of your installation. These are: /var/adm/smlogs/install.cdf - configuration description file /var/adm/smlogs/install.log - general log file /var/adm/smlogs/install.FS.log - file system creation logs /var/adm/smlogs/setld.log - log for the setld(8) utility /var/adm/smlogs/fverify.log - verification log file
The /etc/issue file is not available.
Note: You must ensure that all CPU, device, and disk firmware
and palcode revisions are up to date.
The sys_check script cannot perform this task.
Note: You must make sure that you are using the correct system firmware.
For more information on CPU firmware, see
Alpha Systems Firmware.
Note: You must make sure that you are using the correct storage firmware.
For more information on storage firmware, see
StorageWorks Support.
CPU slot: 0 Firmware revision: 7.0-0 Palcode revision: 1.45-0
The following SCSI devices were found:
Device Vendor Drive Firmware ------ ------ ----- --------
rz0 QUANTUM ATLAS10K2-TY184J DDD6 rz1 QUANTUM ATLAS10K3_18_SCA 020W rz4 PLEXTOR CD-ROM PX-40TS 1.12 rz10 DEC RRD43 (C) DEC 1084 rz11 IBM DXHS18Y 0430 rmt0
Console variables (from CPU firmware):
Firmware Rev: 7.0 system fam:4 cpu:2 smm:1064 auto_action = HALT boot_dev = rz0 Failed to get bootdef_dev booted_dev = rz0 boot_file = booted_file = boot_osflags = A booted_osflags = A boot_reset = ON dump_dev = enable_audit = ON license = SU char_set = language = 0x36 tty_dev = 0 scsiid = scsifast = Failed to get com1_baud Failed to get com1_modem Failed to get com1_flow Failed to get com1_misc Failed to get com2_baud Failed to get com2_modem Failed to get com2_flow Failed to get com2_misc Failed to get password Failed to get secure Failed to get logfail Failed to get srm2dev_id
The most recent boot record for the system, which describes the installed hardware and the operating system version, is as follows:
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue Sep 4 06:18:19 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x936000 to 0x8000000
Digital UNIX V4.0G (Rev. 1530); Thu
_Aug 30 11:37:21 BST 2007
physical memory = 128.00 megabytes.
available memory = 118.80 megabytes.
using 483 buffers containing 3.77
_megabytes of memory
tc0 at nexus
scc0 at tc0 slot 7
tcds0 at tc0 slot 6
scsi0 at tcds0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(QUANTUM ATLAS10K2-TY184J DDD6)
_(Wide16)
rz1 at scsi0 target 1 lun 0 (LID=1)
_(QUANTUM ATLAS10K3_18_SCA 020W)
_(Wide16)
rz4 at scsi0 target 4 lun 0 (LID=2)
_(PLEXTOR CD-ROM PX-40TS 1.12)
scsi1 at tcds0 slot 1
rz10 at scsi1 target 2 lun 0 (LID=3)
_(DEC RRD43 (C) DEC 1084)
rz11 at scsi1 target 3 lun 0 (LID=4)
_(IBM DXHS18Y 0430)
tz13 at scsi1 target 5 lun 0 (LID=5)
_()
bba0 at tc0 slot 7
ln0: DEC LANCE Module Name: PMAD-BA
ln0 at tc0 slot 7
ln0: DEC LANCE Ethernet Interface,
_hardware address: 08-00-2B-BB-81-C9
fb0 at tc0 slot 0
1280X1024
DEC 3000 - M600 system
Firmware revision: 7.0
PALcode: UNIX version 1.45
dli: configured
cam_logger: CAM_ERROR packet
cam_logger: bus 1 target 5 lun 0
ss_device_reset_done
Bus device reset has been performed
Warning: Patch kits have not been installed.
It is recommended that you install the latest patches on your system.
You can obtain Tru64 UNIX patch kits from
Compaq Computer Corporation .
The dupatch utility is not installed.
The /sys/conf/NODE3 file is not available.
The param.c file contains system configuration parameters and should not be modified.
/*
* *****************************************************************
* * *
* * Copyright Compaq Computer Corporation, 2000 *
* * *
* * The software contained on this media is proprietary to *
* * and embodies the confidential technology of Compaq *
* * Computer Corporation. Possession, use, duplication or *
* * dissemination of the software and media is authorized only *
* * pursuant to a valid written license from Compaq Computer *
* * Corporation. *
* * *
* * RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure *
* * by the U.S. Government is subject to restrictions as set *
* * forth in Subparagraph (c)(1)(ii) of DFARS 252.227-7013, *
* * or in FAR 52.227-19, as applicable. *
* * *
* *****************************************************************
*/
/*
* HISTORY
*/
static char *sccsid = "@(#)$RCSfile: param.c,v $ $Revision: 4.3.61.2 $ (DEC) $Date: 1998/11/18 18:43:14 $";
/*
*/
/*
* (c) Copyright 1990, OPEN SOFTWARE FOUNDATION, INC.
* ALL RIGHTS RESERVED
*/
/*
* Mach Operating System
* Copyright (c) 198[7-9] Carnegie-Mellon University
* All rights reserved. The CMU software License Agreement specifies
* the terms and conditions for use and redistribution.
*/
/*
* OSF/1 Release 1.0
*/
/*
* Copyright (C) 1988,1989 Encore Computer Corporation. All Rights Reserved
*
* Property of Encore Computer Corporation.
* This software is made available solely pursuant to the terms of
* a software license agreement which governs its use. Unauthorized
* duplication, distribution or sale are strictly prohibited.
*
*/
/*
* Copyright (c) 1980, 1986 Regents of the University of California.
* All rights reserved. The Berkeley software License Agreement
* specifies the terms and conditions for redistribution.
*
*/
/*
* NOTE: confdep.h MUST preceed param.h.
*
* This allows overriding System V IPC default
* definitions from the kernel config file.
*/
/*
* System parameter formulae.
*
* This file is copied into each directory where we compile
* the kernel; it should be modified there to suit local taste
* if necessary.
*
* Compiled with -DMAXUSERS=xx
*/
/*
* On alpha, "hz", "tick", "fixtick", and "tickadj" are initialized at
* bootup in alpha_init.c.
*/
int hz;
int tick;
int fixtick;
int tickadj;
int maxdriftrecip = 1000; /* This is a default which represents
a ridiculously poor clock which
drifts at a rate of 1 part in 1000,
most cpu clocks are good to between
1 part in 10000 (maxdriftrecip =
10000) and 2 parts in 100000
(maxdriftrecip = 50000). This value
should be established in some (clock)
hardware dependent module, e.g.
mc146818clock.c. for the PMAX */
struct utsname utsname = {
"OSF1",
"",
"",
"",
MACHINE
};
int nproc;
int nproc = MAXPROC;
int nvnode; /* set in vfs_cfg.c now */
int min_free_vnodes; /* set in vfs_cfg.c now */
int max_vnodes = MAX_VNODES; /* max vnodes is now a percentage of memory */
int vnode_age = VNODE_AGE;
u_long ncache_valid_time = NCACHE_VALID_TIME;
/*
* maxuprc is set from source by CHILD_MAX in sys/limits.h. Allow it to be
* overridden if maxuprc is set in the config file. Future kernel code should
* use the global int maxuprc, not MAXUPRC or CHILD_MAX.
*/
int maxuprc = CHILD_MAX;
int maxuprc = MAXUPRC;
unsigned long maxuthreads = 4 * CHILD_MAX; /* maximum threads per user */
int autonice = 0;
int autonice = 1;
int bufcache = 3;
int bufcache = BUFCACHE;
int ubc_minpercent = 10;
int ubc_minpercent = UBCMINPERCENT;
int ubc_maxpercent = 100;
int ubc_maxpercent = UBCMAXPERCENT;
vm_size_t vm_max_wrpgio_kluster = 32*1024;
vm_size_t vm_max_wrpgio_kluster = WRITEIO_KLUSTER;
vm_size_t vm_max_rdpgio_kluster = 16*1024;
vm_size_t vm_max_rdpgio_kluster = READIO_KLUSTER;
int thread_max = THREADMAX; /* max number of threads system-wide */
int thread_max;
int task_max = TASKMAX; /* max number of tasks system-wide */
int task_max;
int port_hash_max_num;
int port_max_num;
int port_reserved_max_num;
int set_max_num;
int maxusers = MAXUSERS;
int sys_v_mode = SYS_V_MODE;
/*
* RT_PREEMPT_OPT is set at config time so that preemption can be
* turned off in a kernel which has RT_PREEMPT compiled on.
*/
long rt_preempt_opt = 1; /* preemption is enabled */
long rt_preempt_opt = 0; /* preemption is disabled */
/*
* callout elements are dynamically allocated now.
*/
int ncallout;
/*
* Assigned value in data/tty_pty_data.c, reference here because
* bsd/tty_pty.c looks at it.
*/
int npty;
int nclist = MAXCLISTS;
int nclist;
int create_fastlinks = 1;
int path_num_max = 64;
int ucred_max = 256;
/*
* Note: nmount_max is *not* a hard limit on the total number of mounts (nfs,
* ufs, s5). It is the number passed to zinit() when initializing the
* 'mount_zone' zone. This zone is dynamically expandable.
*/
int nmount = NMOUNT; /* max number of ufs mounts */
int nmount_max;
int nchsize; /* now set in vfs_cfg.c */
int inohsz = 512;
int spechsz = 64;
/*
* nchsz overrides should be set with sysconfig using
* stanza vfs and parameter name-cache-hash-size. If no
* override for vfs: name-cache-hash-size is set in
* /etc/sysconfigtab, a default value will be
* calculated that scales to the name-cache-size.
*/
int nchsz = 0;
int bufhsz = 512;
int nmbclusters;
int nmbclusters = NMBCLUSTERS;
int ufs_blkpref_lookbehind = 8;
/*
* The default number of per-process file descriptors is configurable.
* The getdtablesize(2) system call should be used to obtain the
* current limit. open_max_soft is the default per-process limit.
* A process can increase its soft limit up to its hard limit using
* setrlimit(2). The default hard and soft limits below must be
* at least 64, and less than or equal to OPEN_MAX_SYSTEM in param.h.
*/
int open_max_hard = OPEN_MAX_HARD;
int open_max_soft = OPEN_MAX_SOFT;
/*
* These have to be allocated somewhere; allocating
* them here forces loader errors if this file is omitted
* (if they've been externed everywhere else; hah!).
*/
struct vnode *vnode, *vnodeNVNODE;
struct file *file, *fileNFILE;
struct cblock *cfree = 0;
struct cblock *cfreelist = 0;
int cfreecount = 0;
/*
* These are initialized at bootstrap time
* to values dependent on memory size
*/
struct buf *buf;
char *buffers;
/*
* Declare these as initialized data so we can patch them.
* moved here from arch/<machine>/startup.c
*/
long nbuf = NBUF;
long nbuf = 0;
long bufpages = BUFPAGES;
long bufpages = 0;
struct namecache *namecache;
struct pid_entry *pidtab, *pidNPID;
struct quota *quota, *quotaNQUOTA;
struct dquot *dquot, *dquotNDQUOT;
/*
* Establish current and maximum values for task's
* data and stack sizes. If maxdsiz is specified in
* the config file, then the define comes from confdep.h,
* otherwise the defaults in vmparam.h are used. Same
* for maxssiz, dfldsiz, and dflssiz.
*/
struct rlimit vm_initial_limit_stack = { DFLSSIZ, MAXSSIZ };
struct rlimit vm_initial_limit_data = { DFLDSIZ, MAXDSIZ };
struct rlimit vm_initial_limit_core = { RLIM_INFINITY, RLIM_INFINITY };
struct rlimit vm_initial_limit_rss = { DFLRSS, MAXRSS };
struct rlimit vm_initial_limit_vas = { MAXVAS, MAXVAS };
/*
* System V IPC definitions. Default values come from param.h
* or user can override the defaults in the kernel config file
* (in which case values come from confdep.h).
*/
/* messages */
struct msginfo msginfo = { /* message parameters */
MSGMAX,
MSGMNB,
MSGMNI,
MSGTQL
};
/* semaphores */
struct seminfo seminfo = { /* semaphore information structure */
SEMMNI,
SEMMSL,
SEMOPM,
SEMUME,
SEMVMX,
SEMAEM
};
/* shared memory */
struct shminfo shminfo = { /* shared memory info structure */
SHMMAX,
SHMMIN,
SHMMNI,
SHMSEG
};
/*
* vm tune parameters
* If any of the vm_tune parameters are defined in
* the config file, then the define comes from
* confdep.h, otherwise the defaults in vm_tune.h
* are used.
*/
struct vm_tune vm_tune = {
COWFAULTS, /* Copy point */
MAPENTRIES, /* Maximum map entries */
MAXVAS, /* Maximum VAS for user map */
MAXWIRE, /* Maximum wired memory */
HEAPPERCENT, /* Percent of memory for heap */
ANONKLSHIFT, /* 128K anon page shift */
ANONKLPAGES, /* Use system default anon_klpages */
VPAGEMAX, /* Maximum vpage for umap */
SEGMENTATION, /* Segmentation on or off */
UBCPAGESTEAL, /* Steal from vnode clean list */
UBCDIRTYPERCENT, /* Percent dirty UBC buffers */
UBCSEQSTARTPERCENT, /* Start when ubc is this percent */
UBCSEQPERCENT, /* Percent sequential allocates */
CSUBMAPSIZE, /* Size of kernel copy map */
UBCBUFFERS, /* Maximum UBC buffers */
SYNCSWAPBUFFERS, /* Maximum synchronous swap buffers */
ASYNCSWAPBUFFERS, /* Maximum asynchronous swap buffers */
CLUSTERMAP, /* ckluster dup map size*/
CLUSTERSIZE, /* max cluster bp size */
ZONE_SIZE, /* zone_map size */
KENTRY_ZONE_SIZE, /* kentry_map size */
SYSWIREDPERCENT, /* max pct of wired memory system-wide*/
INSWAPPEDMIN /* minimum inswapped ticks */
};
/*
* This is the size in bytes of the kernel memory area that is available
* to the SVR4 versions of kmem_alloc() and kmem_zalloc(). See ddi_init()
* for details.
*/
int ddi_map_size = 0x10000;
/*
* The quantum table, indexed by SVR4 RT priority. Note that this table must
* be editted when the number of RT priorities change because of changes in
* SVR4_RT_MAX and/or SVR4_RT_MIN. The priorities are given as MACH
* priorities, and (SVR4_RT_MAX < SVR4_RT_MIN) and (SVR4_RT_MIN <=
* BASEPRI_HIGHEST-1).
*/
int svr4_rt_max = SVR4_RT_MAX;
int svr4_rt_min = SVR4_RT_MIN;
struct rt_default_quantum rt_default_quantum[SVR4_RT_MIN - SVR4_RT_MAX + 1] =
{
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
{ 1, 0 },
};
/*
* provide configurable size for the basic dma window. This is being
* added for reflective memory (Cluster Memory Channel), but could be
* useful for other, dma-intensive devices. If the variable defined
* here is zero, the normal DMA window sizing code in the appropriate
* platform (kn...c) file executes. If this is non-zero (i.e. has been
* set by a sysconfigdb call or an entry in the /etc/sysconfigtab
* file, this is the size of the window (* 1048576), then rounded up
* to the next reasonable megabyte boundary. So, to force a 512-MB
* DMA window, this entry would be 512. To force a gigabyte window,
* this entry would be 1024. NOTE that this is *not* something that
* can change dynamically, while the system is running. Setting the
* DMA window only happens _very_ early in the bootup sequence, so
* changing this variable requires a reboot for it to take effect.
* -bill grava
*/
int basic_dma_window_size = 0; /* init to the default platform logic */
/*
* SCSI CAM subsystem CCB pool parameters.
* Moved here from cam_data.c so they can
* be configured via /etc/sysconfigtab.
*/
U32 cam_ccb_pool_size = 200;
U32 cam_ccb_low_water = 100;
U32 cam_ccb_increment = 50;
/*U32 cam_ccb_high_water = 1000; NOT USED */
/*
* Enable/Disable use of EV56 byte/word IO maps.
* non-zero = auto enable/disable; zero = force disable,
* to disable byte/word maps:
* >>> b -fl i; vmunix ev56_bw_io_maps=0
* or edit param.c and rebuild kernel,
* or dbx /vmunix; patch ev56_bw_io_maps=0.
*/
long ev56_bw_io_maps = 1;
The /sys/conf/NODE3.list file is not available.
The /sys/conf/.product.list file is not available.
-rwxr-xr-x 1 root system 8317888 Aug 30 11:37 /vmunix
/sys/NODE3/vmunix not found
total 823 -rwxr--r-- 1 bin bin 2095 May 14 2000 #.mrg..param.c -r--r--r-- 1 bin bin 14319 May 14 2000 .new..param.c -r--r--r-- 1 bin bin 14319 May 14 2000 .proto..param.c -r--r--r-- 1 bin bin 3269 May 14 2000 BINARY -rw-r--r-- 1 root system 2092 Aug 30 11:34 DONE3 -r--r--r-- 1 bin bin 39091 May 14 2000 GENERIC drwxr-xr-x 2 root system 8192 May 14 2000 alpha -r-xr-xr-x 1 bin bin 409600 May 14 2000 config -r--r--r-- 1 bin bin 786 May 14 2000 copyright -r--r--r-- 1 bin bin 46717 May 14 2000 files -r--r--r-- 1 bin bin 8 May 14 2000 filesystems -r--r--r-- 1 bin bin 4187 May 14 2000 newvers.sh -r--r--r-- 1 bin bin 14319 May 14 2000 param.c -r-xr-xr-x 1 bin bin 229376 May 14 2000 sourceconfig -r--r--r-- 1 bin bin 17310 May 14 2000 template.mk -r--r--r-- 1 bin bin 19702 May 14 2000 template.std.mk -r--r--r-- 1 bin bin 0 May 14 2000 version.banner -r--r--r-- 1 bin bin 4 May 14 2000 version.baselevel -r--r--r-- 1 bin bin 5 May 14 2000 version.build -r--r--r-- 1 bin bin 2 May 14 2000 version.major -r--r--r-- 1 bin bin 2 May 14 2000 version.minor -r--r--r-- 1 bin bin 2 May 14 2000 version.patch -r--r--r-- 1 bin bin 11 May 14 2000 version.product -r--r--r-- 1 bin bin 2 May 14 2000 version.type -r--r--r-- 1 bin bin 2 May 14 2000 version.variant -r--r--r-- 1 bin bin 28 May 14 2000 version.vendor
total 48 -rwxr-xr-x 1 bin bin 49152 May 14 2000 device.mth
total 248 -rw-r--r-- 1 bin bin 246833 May 14 2000 lat.mod
/sbin/init.d/autosysconfig list
Current automatic configuration list includes following dynamic subsystems:
The sysconfigtab file contains boottime values for the attributes of subsystems that are dynamically configured into the kernel. Use the sysconfigdb command or the Kernel Tuner to modify the file.
cma_dd:
eisa:
EISA_Option = Board_Id - ADP0001, Function_Name - AHA1740, Driver_Name - aha, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - ADP0002, Function_Name - AHA1740, Driver_Name - aha, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC2500, Function_Name - Null, Driver_Name - envram, Type - C, Adpt_Config - N
EISA_Option = Board_Id - ISA1010, Function_Name - 'COM,1' Driver_Name - ace, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - ISA1010, Function_Name - 'COM,2', Driver_Name - ace, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - ISA1010, Function_Name - PAR, Driver_Name - lp, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC2A01, Function_Name - SYSMEM, Driver_Name - Null, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC2A01, Function_Name - 'ACECOM,1', Driver_Name - ace, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC2A01, Function_Name - 'ACECOM,2', Driver_Name - ace, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC2A01, Function_Name - PAR, Driver_Name - lp, Type - C, Adpt_Config - N
EISA_Option = Board_Id - MLX0070, Function_Name - Null, Driver_Name - xcr, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - MLX0075, Function_Name - Null, Driver_Name - xcr, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - MLX0077, Function_Name - Null, Driver_Name - xcr, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5000, Function_Name - SYSMEM, Driver_Name - Null, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5000, Function_Name - 'ACECOM,1', Driver_Name - ace, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5000, Function_Name - 'ACECOM,2', Driver_Name - ace, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5000, Function_Name - PAR, Driver_Name - lp, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5100, Function_Name - SYSMEM, Driver_Name - Null, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5100, Function_Name - 'ACECOM,1', Driver_Name - ace, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5100, Function_Name - 'ACECOM,2', Driver_Name - ace, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5100, Function_Name - PAR, Driver_Name - lp, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5301, Function_Name - SYSMEM, Driver_Name - Null, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5301, Function_Name - 'ACECOM,1', Driver_Name - ace, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5301, Function_Name - 'ACECOM,2', Driver_Name - ace, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5301, Function_Name - PAR, Driver_Name - lp, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC6000, Function_Name - 'SYSMEM', Driver_Name - Null, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
isa:
ISA_Option = Board_Id - Null, Function_Name - 'KBD,MOUSE', Driver_Name - gpc, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
ISA_Option = Board_Id - Null, Function_Name - COM, Driver_Name - ace, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
ISA_Option = Board_Id - Null, Function_Name - LPT, Driver_Name - lp, Type - C, Adpt_Config - N
ISA_Option = Board_Id - Null, Function_Name - 'ISA--SCC', Driver_Name - iscc, Type - C, Adpt_Config - N
pci:
tc:
TC_Option = Modname - 'PMTNV-AA', Driver_Name - nvtc, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAP-AA', Driver_Name - nvtc, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAZ-AA', Driver_Name - asc, Int_Aft_Attach - 1, Type - A, Adpt_Config - N
TC_Option = Modname - 'PMAZ-DS', Driver_Name - tcds, Int_Aft_Attach - 1, Type - A, Adpt_Config - N
TC_Option = Modname - 'PMAZ-FS', Driver_Name - tcds, Int_Aft_Attach - 1, Type - A, Adpt_Config - N
TC_Option = Modname - 'PMAZB-AA', Driver_Name - tcds, Int_Aft_Attach - 1, Type - A, Adpt_Config - N
TC_Option = Modname - 'PMAZB-AB', Driver_Name - tcds, Int_Aft_Attach - 1, Type - A, Adpt_Config - N
TC_Option = Modname - 'PMAZC-AA', Driver_Name - tcds, Int_Aft_Attach - 1, Type - A, Adpt_Config - N
TC_Option = Modname - 'KZTSA-AA', Driver_Name - tza, Int_Aft_Attach - 1, Type - A, Adpt_Config - N
TC_Option = Modname - 'PMAGB-BA', Driver_Name - fb, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAG-RO', Driver_Name - fb, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAG-JA', Driver_Name - fb, Type - C, Adpt_Config - N
TC_Option = Modname - PMADC, Driver_Name - pv, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAGC-AA', Driver_Name - pv, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAGC-BA', Driver_Name - pv, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAGC-DA', Driver_Name - pvl, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAGC-EA', Driver_Name - pvl, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
TC_Option = Modname - PMAGD, Driver_Name - fb, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAGD-AA', Driver_Name - fb, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAGD-BA', Driver_Name - fb, Int_Aft_Attach - 1, Type - C, Adpt_Config - N
fdi:
ISA_Option = Board_Id - Null, Function_Name - FLOPPY, Driver_Name - fdi, Type - C, Adpt_Config - N
EISA_Option = Board_Id - ADP0002, Function_Name - 'MSD,FPYCTL', Driver_Name - fdi, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC2400, Function_Name - 'MSD,FPYCTL', Driver_Name - fdi, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC2A01, Function_Name - 'MSD,FPYCTL', Driver_Name - fdi, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5000, Function_Name - 'MSD,FPYCTL', Driver_Name - fdi, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5100, Function_Name - 'MSD,FPYCTL', Driver_Name - fdi, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC5301, Function_Name - 'MSD,FPYCTL', Driver_Name - fdi, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC6000, Function_Name - 'MSD,FPYCTL', Driver_Name - fdi, Type - C, Adpt_Config - N
ln:
TC_Option = Modname - 'PMAD-AA', Driver_Name - ln, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC4220, Function_Name - 'NET,ETH', Driver_Name - ln, Type - C, Adpt_Config - N
le:
ISA_Option = Board_Id - Null, Function_Name - 'DE200-LE', Driver_Name - le, Type - C, Adpt_Config - N
el:
PCMCIA_Option = Manufact_Name - '3Com Corporation', Product_Name - '3C589', Manufact_Id - 0x101, Card_Rev - 0, Func_Code - 6, Driver_Name - el, Loadable_Flag - 0, Unload_Flag - 0, Intr_Handler_Flag - 0, Type - C, Adpt_Config - N, Man_Name_Mo_Flag - 1, Prd_Name_Mo_Flag - 1, Mid_Mo_Flag - 0, Card_Rev_Mo_Flag - 0
PCMCIA_Option = Manufact_Name - '3Com Corporation', Product_Name - '3C589D', Manufact_Id - 0x101, Card_Rev - 0, Func_Code - 6, Driver_Name - el, Loadable_Flag - 0, Unload_Flag - 0, Intr_Handler_Flag - 0, Type - C, Adpt_Config - N, Man_Name_Mo_Flag - 1, Prd_Name_Mo_Flag - 1, Mid_Mo_Flag - 0, Card_Rev_Mo_Flag - 0
ISA_Option = Board_Id - Null, Function_Name - 3C509, Driver_Name - el, Type - C, Adpt_Config - N
tu:
EISA_Option = Board_Id - DEC4250, Function_Name - Null, Driver_Name - tu, Type - C, Adpt_Config - N
ee:
alt:
fza:
TC_Option = Modname - 'PMAF-AA', Driver_Name - fza, Type - C, Adpt_Config - N
fta:
TC_Option = Modname - 'PMAF-FA', Driver_Name - fta, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAF-FS', Driver_Name - fta, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAF-FD', Driver_Name - fta, Type - C, Adpt_Config - N
TC_Option = Modname - 'PMAF-FU', Driver_Name - fta, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC3001, Function_Name - Null, Driver_Name - fta, Type - C, Adpt_Config - N
EISA_Option = Board_Id - DEC3002, Function_Name - Null, Driver_Name - fta, Type - C, Adpt_Config - N
tra:
TC_Option = Modname - 'PMAT-AA', Driver_Name - tra, Type - C, Adpt_Config - N
ISA_Option = Board_Id - Null, Function_Name - DW110, Driver_Name - tra, Type - C, Adpt_Config - N
ISA_Option = Board_Id - Null, Function_Name - TKRNG, Driver_Name - tra, Type - C, Adpt_Config - N
EISA_Option = Board_Id - PRO6000, Function_Name - Null, Driver_Name - tra, Type - C, Adpt_Config - N
EISA_Option = Board_Id - PRO6001, Function_Name - Null, Driver_Name - tra, Type - C, Adpt_Config - N
EISA_Option = Board_Id - PRO6002, Function_Name - Null, Driver_Name - tra, Type - C, Adpt_Config - N
lta:
TC_Option = Modname - 'DGLTA-FA',Driver_Name - lta, Type - C, Adpt_Config - N
lfa:
pcmcia:
PCMCIA_Option = Manufact_Name - 'AT&T Paradyne', Product_Name - 'KeepInTouch Card', Manufact_Id - 0, Card_Rev - 0, Func_Code - 2, Driver_Name - ace, Loadable_Flag - 0, Unload_Flag - 0, Intr_Handler_Flag - 1, Type - C, Adpt_Config - N, Man_Name_Mo_Flag - 1, Prd_Name_Mo_Flag - 1, Mid_Mo_Flag - 0, Card_Rev_Mo_Flag - 0
PCMCIA_Option = Manufact_Name - 'Digital', Product_Name - 'PCMCIA V.32bis 14,400 Fax', Manufact_Id - 0, Card_Rev - 0, Func_Code - 2, Driver_Name - ace, Loadable_Flag - 0, Unload_Flag - 0, Intr_Handler_Flag - 1, Type - C, Adpt_Config - N, Man_Name_Mo_Flag - 1, Prd_Name_Mo_Flag - 1, Mid_Mo_Flag - 0, Card_Rev_Mo_Flag - 0
PCMCIA_Option = Manufact_Name - 'MEGAHERTZ', Product_Name - 'XJ2288', Manufact_Id - 0, Card_Rev - 0, Func_Code - 2, Driver_Name - ace, Loadable_Flag - 0, Unload_Flag - 0, Intr_Handler_Flag - 1, Type - C, Adpt_Config - N, Man_Name_Mo_Flag - 1, Prd_Name_Mo_Flag - 1, Mid_Mo_Flag - 0, Card_Rev_Mo_Flag - 0
PCMCIA_Option = Manufact_Name - 'AD PC-CARD', Product_Name - 'RC288ACL', Manufact_Id - 0, Card_Rev - 0, Func_Code - 2, Driver_Name - ace, Loadable_Flag - 0, Unload_Flag - 0, Intr_Handler_Flag - 1, Type - C, Adpt_Config - N, Man_Name_Mo_Flag - 1, Prd_Name_Mo_Flag - 1, Mid_Mo_Flag - 0, Card_Rev_Mo_Flag - 0
PCMCIA_Option = Manufact_Name - 'AD2880WRLD', Product_Name - 'International_V.34_PC-Card_Modem', Manufact_Id - 0, Card_Rev - 0, Func_Code - 2, Driver_Name - ace, Loadable_Flag - 0, Unload_Flag - 0, Intr_Handler_Flag - 1, Type - C, Adpt_Config - N, Man_Name_Mo_Flag - 1, Prd_Name_Mo_Flag - 1, Mid_Mo_Flag - 0, Card_Rev_Mo_Flag - 0
PCMCIA_Option = Manufact_Name - 'INTEGRAL PERIPHERALS', Product_Name - 'ATA CARD', Manufact_Id - 0, Card_Rev - 0, Func_Code - 4, Driver_Name - ata, Loadable_Flag - 0, Unload_Flag - 0, Intr_Handler_Flag - 0, Type - C, Adpt_Config - N, Man_Name_Mo_Flag - 1, Prd_Name_Mo_Flag - 1, Mid_Mo_Flag - 0, Card_Rev_Mo_Flag - 0
PCMCIA_Option = Manufact_Name - 'IBM', Product_Name - '', Manufact_Id - 0, Card_Rev - 0, Func_Code - 4, Driver_Name - ata, Loadable_Flag - 0, Unload_Flag - 0, Intr_Handler_Flag - 0, Type - C, Adpt_Config - N, Man_Name_Mo_Flag - 1, Prd_Name_Mo_Flag - 0, Mid_Mo_Flag - 0, Card_Rev_Mo_Flag - 0
PCMCIA_Option = Manufact_Name - 'Maxtor', Product_Name - '', Manufact_Id - 0, Card_Rev - 0, Func_Code - 4, Driver_Name - ata, Loadable_Flag - 0, Unload_Flag - 0, Intr_Handler_Flag - 0, Type - C, Adpt_Config - N, Man_Name_Mo_Flag - 1, Prd_Name_Mo_Flag - 0, Mid_Mo_Flag - 0, Card_Rev_Mo_Flag - 0
qvision:
EISA_Option = Board_Id - CPQ3011, Function_Name - Null, Driver_Name - qvision, Type - C, Adpt_Config - N
EISA_Option = Board_Id - CPQ3111, Function_Name - Null, Driver_Name - qvision, Type - C, Adpt_Config - N
EISA_Option = Board_Id - CPQ3112, Function_Name - Null, Driver_Name - qvision, Type - C, Adpt_Config - N
cirrus:
EISA_Option = Board_Id - DEC5000, Function_Name - VID, Driver_Name - cirrus, Type - C, Adpt_Config - N
ati64:
EISA_Option = Board_Id - ISA6400, Function_Name - Null, Driver_Name - ati, Type - C, Adpt_Config - N
ISA_Option = Board_Id - Null, Function_Name - 'MACH64', Driver_Name - ati, Type - C, Adpt_Config - N
s3trio:
ISA_Option = Board_Id - Null, Function_Name - 'WD90', Driver_Name - wd, Type - C, Adpt_Config - N
vga:
EISA_Option = Board_Id - PHI8041, Function_Name - Null, Driver_Name - vga, Type - C, Adpt_Config - N
ISA_Option = Board_Id - Null, Function_Name - 'ISA--VGA', Driver_Name - vga, Type - C, Adpt_Config - N
vb:
VBA_Option = Manufact_Name - 'Digital', Product_Name - 'VME Backplane Network Driver', Bus_Instance - 0, Driver_Name - vb, Driver_Instance - 0, Csr1 - 0, Csr2 - 0, Vector - 0x1150, Bus_Priority - 7, Type - C, Adpt_Config - N
DEC_USBhub:
USB_Class_Driver = Driver_Name - usb_hub, Release_Num - 0x1000, Device_Class - 0x09, Device_Sub_Class - 0x1, Config_Device - 0x1
USB_Class_Driver = Driver_Name - usb_hub, Release_Num - 0x1000, Device_Class - 0x09, Device_Sub_Class - 0x0, Config_Device - 0x1
DEC_USBmouse:
USB_Class_Driver = Driver_Name - usb_mouse, Release_Num - 0x1000, Device_Class - 0xff, Interface_Class - 0x03, Interface_Sub_Class - 0x01, Interface_Protocol - 0x02, Config_Interface - 0x1
DEC_USBkeyboard:
USB_Class_Driver = Driver_Name - usb_keyboard, Release_Num - 0x1000, Device_Class - 0xff, Interface_Class - 0x03, Interface_Sub_Class - 0x01, Interface_Protocol - 0x01, Config_Interface - 0x1
DEC_USBhid:
USB_Class_Driver = Driver_Name - usb_hid, Release_Num - 0x1000, Device_Class - 0xff, Interface_Class - 0x03, Interface_Sub_Class - 0x01, Config_Interface - 0x1
DEC_USBprinter:
USB_Class_Driver = Driver_Name - usb_printer, Release_Num - 0x1000, Interface_Class - 0x07, Interface_Sub_Class - 0x01, Interface_Protocol - 0x01, Config_Interface - 0x1
emx:
Current attribute values for the cm subsystem:
cm: max_callbacks = 341
Current attribute values for the generic subsystem:
generic: clock-frequency = 1024 booted_kernel = vmunix booted_args = vmunix lockmode = 0 lockdebug = 0 locktimeout = 15 max-lock-per-thread = 16 lockmaxcycles = 0 rt_preempt_opt = 0 rt-preempt-opt = 0 cpu_enable_mask = 18446744073709551615 cpu-enable-mask = 18446744073709551615 binlog-buffer-size = 0 msgbuf_size = 8192 message-buffer-size = 8192 dump-sp-threshold = 4096 lite-system = 0 physio_max_coalescing = 65536 kmem-percent = 0 kmemhighwater-16 = 4 kmemhighwater-32 = 8 kmemhighwater-64 = 8 kmemhighwater-128 = 8 kmemhighwater-256 = 8 kmemhighwater-512 = 8 kmemhighwater-1k = 8 kmemhighwater-2k = 8 kmemhighwater-4k = 8 kmemhighwater-8k = 8 kmemhighwater-16k = 4 kmemhighwater-32k = 0 kmemhighwater-64k = 0 kmemhighwater-128k = 0 kmemhighwater-256k = 0 kmemhighwater-512k = 0 kmemhighwater-96 = 8 kmemhighwater-160 = 8 kmemhighwater-192 = 8 kmemhighwater-320 = 8 kmemhighwater-384 = 8 kmemhighwater-448 = 8 kmemhighwater-576 = 8 kmemhighwater-640 = 8 kmemhighwater-704 = 8 kmemhighwater-768 = 8 kmemhighwater-896 = 8 kmemhighwater-1152 = 8 kmemhighwater-1344 = 8 kmemhighwater-1600 = 8 kmemhighwater-2688 = 8 kmemhighwater-12k = 4 kmem-debug = 0 kmem-debug-size-mask = 0 kmem-protected-size = 0 kmem-protected-lowat = 1000 kmem-protected-hiwat = 0 kmem-protected-kmempercent = 75 kmem-audit-count = 1024 old-obreak = 1 user_cfg_pt = 45000 memstr-buf-size = 0 memstr-start-addr = 0 memstr-end-addr = 0 insecure-bind = 0 kmemreserve-percent = 0
Current attribute values for the io subsystem:
io: bdevsw-size = 140 cdevsw-size = 140 max-iosize-read = 65536 max-iosize-write = 65536 basic-dma-window-size = 0 dma-sg-map-64bit = 0 dma-dac-capable = attribute does not allow this operation dma-sg-map-unload-zero = 2 device_switch_inited = 1 device_switch_stale = 0 device_switch_print = 0 cam_ccb_pool_size = 200 cam_ccb_low_water = 100 cam_ccb_increment = 50 no_scatter_gather = 0
Current attribute values for the ipc subsystem:
ipc: msg-max = 8192 msg-mnb = 16384 msg-mni = 64 msg-tql = 40 shm-max = 4194304 shm-min = 1 shm-mni = 128 shm-seg = 32 sem-mni = 16 sem-msl = 25 sem-opm = 10 sem-ume = 10 sem-vmx = 32767 sem-aem = 16384 num-of-sems = 60 max-kernel-ports = 22487 port-hash-max-num = 1124350 port-reserved-max-num = 22487 set-max-num = 1029 ssm-threshold = 8388608 ssm-enable-core-dump = 1
Current attribute values for the proc subsystem:
proc: max-proc-per-user = 64 max-threads-per-user = 256 per-proc-stack-size = 2097152 max-per-proc-stack-size = 33554432 per-proc-data-size = 134217728 max-per-proc-data-size = 1073741824 max-per-proc-address-space = 1073741824 per-proc-address-space = 1073741824 executable_stack = 0 autonice = 0 autonice-time = 600 autonice-penalty = 4 open-max-soft = 4096 open-max-hard = 4096 ncallout_alloc_size = 8192 round-robin-switch-rate = 0 round_robin_switch_rate = 0 sched-min-idle = 0 sched_min_idle = 0 give-boost = 1 give_boost = 1 maxusers = 32 task-max = 277 thread-max = 552 num-wait-queues = 64 num-timeout-hash-queues = 32 enable_extended_uids = 0 enhanced-core-name = 0 enhanced-core-max-versions = 16
Current attribute values for the sec subsystem:
sec: audit-buffer-size = 16 audit-site-events = 64 nfs-flatten-mode = 0 ufs-sec-proplist-max-entry = 1548 ufs-proplist-max-entry = 8192
Current attribute values for the socket subsystem:
socket: pftimerbindcpu = 0 sbcompress_threshold = 0 sb_max = 1048576 sobacklog_drops = 0 sobacklog_hiwat = 1 somaxconn = 1024 somaxconn_drops = 0 sominconn = 0 mbuf_ext_lock_count = 64 umc_min_len = 1024 umc = 0
Current attribute values for the rt subsystem:
rt: aio-max-num = 716 aio-task-max-num = 333 aio-listio-max-num = 64 aio-max-percent = 1 aio-max-retry = 0 aio-retry-scale = 4 aio-socket-on-off = 1 sigqueue-max-num = 64 rttimer-max-num = 32 aio-percpu-data = 0 rtsem-nsems-max = 256
Current attribute values for the bsd_tty subsystem:
bsd_tty: nclist = 120
Current attribute values for the xpr subsystem:
xpr:
Current attribute values for the dli subsystem:
dli: must-be-root = 1 max-ifq-length = 512
Current attribute values for the ffm_fs subsystem:
ffm_fs:
Current attribute values for the bparm subsystem:
bparm: bootdef_dev = subsystem fault: can't perform operation boot_dev = subsystem fault: can't perform operation boot_osflags = subsystem fault: can't perform operation
Current attribute values for the advfs subsystem:
advfs: AdvfsCacheMaxPercent = 7 AdvfsMinFragGrps = 16 AdvfsMaxFragGrps = 48 AdvfsAccessMaxPercent = 80 AdvfsAccessCleanupPercent = 33 AdvfsSyncMmapPages = 1 AdvfsMaxDevQLen = 24 AdvfsFavorBlockingQueue = 1 AdvfsReadyQLim = 16384 AdvfsPreallocAccess = 128 AdvfsCacheHashSize = 1024
Current attribute values for the net subsystem:
net: arptab_nb = 37 ifqmaxlen = 512 netisrfair = 1 netisrpriority = 33 netisrthreads = 1 netisrwakeupthreshold = 1 nslip = 1 screen_cachedepth = 8 screen_cachewidth = 8 screen_maxpend = 32
Current attribute values for the netrain subsystem:
netrain: nr_debug = 0 nr_maxdev = 128 nr_max_retries = 4 netrain_timeout = 1000
Current attribute values for the inet subsystem:
inet: inifaddr_hsize = 32 ipdefttl = 64 ipdirected_broadcast = 0 ipforwarding = 0 ipfragttl = 60 ipgateway = 0 ipport_userreserved = 5000 ipport_userreserved_min = 1024 ipqmaxlen = 512 ipqs = 1 ipsendredirects = 1 ipsrcroute = 1 pmtu_decrease_intvl = 1200 pmtu_enabled = 1 pmtu_increase_intvl = 240 pmtu_rt_check_intvl = 20 subnetsarelocal = 1 tcbhashnum = 1 tcbhashsize = 512 tcbquicklisten = 1 tcp_compat_42 = 1 tcp_cwnd_segments = 2 tcp_dont_winscale = 0 tcp_keepalive_default = 0 tcp_keepcnt = 8 tcp_keepidle = 14400 tcp_keepinit = 150 tcp_keepintvl = 150 tcp_msl = 60 tcp_mssdflt = 536 tcpnodelack = 0 tcp_recvspace = 32768 tcp_rexmit_interval_min = 2 tcp_rexmtmax = 128 tcprexmtthresh = 3 tcp_rttdflt = 3 tcp_sendspace = 32768 tcp_ttl = 60 tcptwreorder = 0 tcp_urgent_42 = 1 udpcksum = 1 udp_recvspace = 41600 udp_sendspace = 9216 udp_ttl = 30
Current attribute values for the snmpinfo subsystem:
snmpinfo: snmp_devs = 12
Current attribute values for the bufcall subsystem:
bufcall:
Current attribute values for the streams subsystem:
streams: strmsgsz = 12288 nstrpush = 9
Current attribute values for the dlb subsystem:
dlb:
Current attribute values for the kinfo subsystem:
kinfo: kinfo_streams = 10
Current attribute values for the strstd subsystem:
strstd:
Current attribute values for the ldtty subsystem:
ldtty:
Current attribute values for the pts subsystem:
pts: nptys = 255
Current attribute values for the ufs subsystem:
ufs: inode-hash-size = 512 create-fastlinks = 1 ufs-blkpref-lookbehind = 8 nmount = 128
Current attribute values for the vfs subsystem:
vfs: name-cache-size = 1029 name-cache-hash-size = 128 buffer-hash-size = 512 special-vnode-alias-tbl-size = 64 bufcache = 3 bufpages = 483 path-num-max = 64 sys-v-mode = 0 ucred-max = 256 nvnode = 468 max-vnodes = 13107 min-free-vnodes = 468 vnode-age = 120 namei-cache-valid-time = 1200 max-free-file-structures = 0 max-ufs-mounts = 1000 vnode-deallocation-enable = 1 pipe-maxbuf-size = 65536 pipe-single-write-max = -1 pipe-databuf-size = 8192 pipe-max-bytes-all-pipes = 81920000 noadd-exec-access = 0 fifo-do-adaptive = 1 smoothsync-age = 30 io-throttle-static = 0 io-throttle-shift = 1 io-throttle-maxmzthruput = 1
Current attribute values for the vm subsystem:
vm: ubc-minpercent = 10 ubc-maxpercent = 100 ubc-borrowpercent = 20 ubc-maxdirtywrites = 5 vm-max-wrpgio-kluster = 32768 vm-max-rdpgio-kluster = 16384 vm-cowfaults = 4 vm-mapentries = 200 vm-maxvas = 1073741824 vm-maxwire = 16777216 vm-heappercent = 7 vm-vpagemax = 16384 vm-segmentation = 1 vm-ubcpagesteal = 24 vm-ubcdirtypercent = 10 vm-ubcseqstartpercent = 50 vm-ubcseqpercent = 10 vm-csubmapsize = 1048576 vm-ubcbuffers = 256 vm-syncswapbuffers = 128 vm-asyncswapbuffers = 4 vm-clustermap = 1048576 vm-clustersize = 65536 vm-zone_size = 0 vm-kentry_zone_size = 16777216 vm-syswiredpercent = 80 vm-inswappedmin = 1 vm-page-free-target = 128 vm-page-free-swap = 74 vm-page-free-hardswap = 2048 vm-page-free-min = 20 vm-page-free-reserved = 10 vm-page-free-optimal = 74 vm-page-prewrite-target = 256 dump-user-pte-pages = 0 kernel-stack-guard-pages = 1 vm-min-kernel-address = 18446744071562067968 malloc-percpu-cache = 1 vm-aggressive-swap = 0 vm_page_color_private = 0 vm-map-index-count = 64 vm-map-index-rebalance = 128 vm-map-index-enabled = 1 vm-map-index-hiwat = 4 vm-map-index-lowat = 2 new-wire-method = 1 vm-segment-cache-max = 50 vm-page-lock-count = 0 gh-chunks = 0 gh-min-seg-size = 8388608 gh-fail-if-no-mem = 1 private-text = 0 private-cache-percent = 0
Current attribute values for the cma_dd subsystem:
cma_dd: CMA_Option = attribute does not allow this operation hw_database_debug = 0
Current attribute values for the cam_disk subsystem:
cam_disk: initialized = 1 max_spinups_per_bus = 2 disk_no_response_time = 14 disk_starvation_time = 4294967295 disk_dualcntr_no_resp_time = 30 disk_bus_resp_time_enable = 0 pwrmgmt_poll_period = 30 disk_busy_timeout = 10 disk_iob_retry = 3 disk_iob_aptpl = 0 disk_iob_console_key = 18446744073709551615
Current attribute values for the cam_tape subsystem:
cam_tape: initialized = 1 open_behaviour = 1 fixed_block_padding = 0
Current attribute values for the cam subsystem:
cam: cam_initialized_flag = 1 cam_printdb_flag = 0 cam_param_1 = 1 number_of_SCSI_buses = 0 num_peripheral_drivers = 2 num_old_peripheral_drivers = 0
Current attribute values for the tc subsystem:
tc: Module_Config_Name = attribute does not allow this operation Module_Type = attribute does not allow this operation TC_Option = attribute does not allow this operation TC_Developer_Debug = 0 Adapt_Config = -4398041152844 Confl1 = 0
Current attribute values for the scc subsystem:
scc: scc_cnt = 4 scc_major = -1
Current attribute values for the bba subsystem:
bba:
Current attribute values for the ws subsystem:
ws: ws_graphics_flag = attribute does not allow this operation
Current attribute values for the scc_input subsystem:
scc_input: scc_input_developer_debug = 0
Current attribute values for the sfbp subsystem:
sfbp: sfbp_enable_blockmode = 0
Current attribute values for the ddr subsystem:
ddr:
Current attribute values for the kio subsystem:
kio:
Current attribute values for the kds subsystem:
kds: kds_version = 1 kds_inited = 3 kds_print_flag = 0 kds_num_db = 4 kds_corrupt = 0 kds_bio_read = 2 kds_kio_read = 0 kds_kio_write = 2
Current attribute values for the lan_common subsystem:
lan_common: Version = 1
Current attribute values for the cfgtree subsystem:
cfgtree: CFGTREE_Developer_Debug = 0
Current attribute values for the envmon subsystem:
envmon: env_current_temp = 2 env_high_temp_thresh = 2 env_fan_status = 2 env_ps_status = 2 env_supported = 0
Current attribute values for the lat subsystem:
lat:
The /etc/rc.config.common file is not available.
The /etc/rc.config file contains parameters that the system startup scripts use in order to boot the system.
DISPLAYTYPE= HOSTNAME="node3.wickensonline.co.uk" NUM_NETCONFIG="1" MAX_NETDEVS="24" NETDEV_0="ln0" NETDEV_1= NETDEV_2= NETDEV_3= NETDEV_4= NETDEV_5= NETDEV_6= NETDEV_7= IFCONFIG_0="192.168.1.249 netmask 255.255.255.0" IFCONFIG_1= IFCONFIG_2= IFCONFIG_3= IFCONFIG_4= IFCONFIG_5= IFCONFIG_6= IFCONFIG_7= RWHOD="no" ROUTED="yes" ROUTED_FLAGS="-q" ROUTER="no" GATED="no" GATED_FLAGS= JOIND= JOIND_FLAGS= PAGERAW="1" PAGEFILE="/dev/rz0b" PARTITION="rz0b" PARTITIONTYPE="ATLAS10K" PAGEMINSZ=0 PAGEMAXSZ=0 QUOTA_CONFIG= export DISPLAYTYPE HOSTNAME NUM_NETCONFIG QUOTA_CONFIG export NETDEV_0 NETDEV_1 NETDEV_2 NETDEV_3 NETDEV_4 NETDEV_5 NETDEV_6 NETDEV_7 export IFCONFIG_0 IFCONFIG_1 IFCONFIG_2 IFCONFIG_3 IFCONFIG_4 IFCONFIG_5 export IFCONFIG_6 IFCONFIG_7 RWHOD ROUTED ROUTED_FLAGS GATED GATED_FLAGS export ROUTER MAX_NETDEVS JOIND JOIND_FLAGS export PAGERAW PAGEFILE PARTITION PARTITIONTYPE PAGEMINSZ PAGEMAXSZ INST_SERVER="rz" export INST_SERVER XLOGIN="cde" export XLOGIN LAT_SETUP="1" export LAT_SETUP ENVMON_CONFIGURED="0" export ENVMON_CONFIGURED GATED_OLD="no" export GATED_OLD BIND_CONF="YES" export BIND_CONF BIND_SERVERTYPE="PRIMARY" export BIND_SERVERTYPE BIND_SERVERARGS="-b /etc/namedb/named.boot" export BIND_SERVERARGS
The inittab file provides the init program with instructions for creating and running initialization processes. The init program reads the inittab file each time it is invoked (most importantly, when the system boots). The file typically contains instructions for the default initialization, the creation and control of processes at each run level, and the getty command, which controls the activation of terminal lines.
is:s:initdefault: ss:Ss:wait:/sbin/rc0 shutdown < /dev/console > /dev/console 2>&1 s0:0:wait:/sbin/rc0 off < /dev/console > /dev/console 2>&1 fs:23:wait:/sbin/bcheckrc < /dev/console > /dev/console 2>&1 kls:Ss:sysinit:/sbin/kloadsrv < /dev/console > /dev/console 2>&1 sysconfig:23:wait:/sbin/init.d/autosysconfig start < /dev/console > /dev/console 2>&1 update:23:wait:/sbin/update > /dev/console 2>&1 smsync:23:wait:/sbin/sysconfig -r vfs smoothsync-age=30 > /dev/null 2>&1 smsyncS:Ss:wait:/sbin/sysconfig -r vfs smoothsync-age=0 > /dev/null 2>&1 it:23:wait:/sbin/it < /dev/console > /dev/console 2>&1 kmk:3:wait:/sbin/kmknod > /dev/console 2>&1 s2:23:wait:/sbin/rc2 < /dev/console > /dev/console 2>&1 s3:3:wait:/sbin/rc3 < /dev/console > /dev/console 2>&1 cons:1234:respawn:/usr/sbin/getty console console vt100
The following scripts are run by the init program when the system boots:
total 188 -rwxr-x--- 1 bin bin 2127 May 14 2000 .new..rmtmpfiles -rwxr-x--- 1 bin bin 2127 May 14 2000 .proto..rmtmpfiles -rwxr-x--- 1 bin bin 1663 May 14 2000 acct -rwxr-x--- 1 bin bin 1723 May 14 2000 atm -rwxr-x--- 1 bin bin 2309 May 14 2000 audit -rwxr-x--- 1 bin bin 6356 May 14 2000 autosysconfig drwxr-xr-x 2 root system 8192 May 14 2000 bin -rwxr-x--- 1 bin bin 1810 May 14 2000 binlog -rwxr-x--- 1 bin bin 2543 May 14 2000 crashdc -rwxr-x--- 1 bin bin 1892 May 14 2000 cron -rwxr-x--- 1 bin bin 2193 May 14 2000 dhcp -rwxr-x--- 1 bin bin 1743 May 14 2000 enlogin -rwxr-x--- 1 bin bin 4486 Apr 28 2000 envmon -rwxr-x--- 1 bin bin 2775 May 14 2000 gateway -rwxr-x--- 1 bin bin 12216 May 14 2000 inet -rwxr-x--- 1 bin bin 1933 May 14 2000 inetd -rwxr-x--- 1 bin bin 1822 May 14 2000 insightd -rwxr-x--- 1 root system 448 Sep 4 11:22 killconsole -rwxr-x--- 1 bin bin 1737 May 14 2000 kmod -rwxr-x--- 1 bin bin 4859 May 14 2000 lat -rwxr-x--- 1 bin bin 2675 May 14 2000 libmsetup -rwxr-x--- 1 bin bin 2347 May 14 2000 lpd -rwxr-x--- 1 bin bin 2673 May 14 2000 lsm -rwxr-x--- 1 bin bin 1465 May 14 2000 mfsmount -rwxr-x--- 1 bin bin 1851 May 14 2000 motd -rwxr-x--- 1 bin bin 3933 May 14 2000 named -rwxr-x--- 1 bin bin 6317 May 14 2000 nfs -rwxr-x--- 1 bin bin 2739 May 14 2000 nfsmount -rwxr-x--- 1 bin bin 5972 May 14 2000 nis -rwxr-x--- 1 bin bin 2596 May 14 2000 paging -rwxr-x--- 1 bin bin 1486 May 14 2000 preserve -rwxr-x--- 1 bin bin 4415 May 14 2000 presto -rwxr-x--- 1 bin bin 2697 May 14 2000 quota -rwxr-x--- 1 bin bin 1785 May 14 2000 recpasswd -rwxr-x--- 1 bin bin 2127 May 14 2000 rmtmpfiles -rwxr-x--- 1 bin bin 2471 May 14 2000 route -rwxr-x--- 1 bin bin 2154 May 14 2000 rwho -rwxr-x--- 1 bin bin 4318 May 14 2000 savecore -rwxr-x--- 1 bin bin 2117 May 14 2000 security -rwxr-x--- 1 bin bin 14249 May 14 2000 sendmail -rwxr-x--- 1 bin bin 3040 May 14 2000 settime -rwxr-x--- 1 bin bin 1664 May 14 2000 sia -rwxr-x--- 1 bin bin 3433 May 14 2000 snmpd -rwxr-x--- 1 bin bin 1732 May 14 2000 startlmf -rwxr-x--- 1 bin bin 1741 May 14 2000 streams -rwxr-x--- 1 bin bin 1903 May 14 2000 syslog -rwxr-x--- 1 bin bin 1904 May 14 2000 timed -rwxr-x--- 1 bin bin 1428 May 14 2000 uucp -rwxr-xr-x 1 bin bin 2387 Apr 28 2000 vectored_x -rwxr-x--- 1 bin bin 2529 May 14 2000 write -rwxr-x--- 1 bin bin 1472 May 14 2000 ws -rwxr-xr-x 1 bin bin 5225 Sep 3 14:52 xlogin -rwxr-x--- 1 bin bin 3390 May 14 2000 xntpd
The following scripts are run by the init program when the system boots:
lrwxr-xr-x 1 root bin 18 Aug 30 10:40 /sbin/rc2.d/S00savecore -> ../init.d/savecore lrwxr-xr-x 1 root bin 19 Aug 30 10:40 /sbin/rc2.d/S01libmsetup -> ../init.d/libmsetup lrwxr-xr-x 1 root bin 16 Aug 30 10:40 /sbin/rc2.d/S05paging -> ../init.d/paging lrwxr-xr-x 1 root bin 18 Aug 30 10:40 /sbin/rc2.d/S06mfsmount -> ../init.d/mfsmount lrwxr-xr-x 1 root bin 19 Aug 30 10:40 /sbin/rc2.d/S10recpasswd -> ../init.d/recpasswd lrwxr-xr-x 1 root bin 14 Aug 30 10:51 /sbin/rc2.d/S15uucp -> ../init.d/uucp lrwxr-xr-x 1 root bin 17 Aug 30 10:40 /sbin/rc2.d/S25enlogin -> ../init.d/enlogin lrwxr-xr-x 1 root bin 17 Aug 30 10:40 /sbin/rc2.d/S35streams -> ../init.d/streams lrwxr-xr-x 1 root bin 13 Aug 30 10:45 /sbin/rc2.d/S45atm -> ../init.d/atm
The following scripts are run by the init program when the system boots:
lrwxr-xr-x 1 root bin 14 Aug 30 10:44 /sbin/rc3.d/S00inet -> ../init.d/inet lrwxr-xr-x 1 root bin 15 Aug 30 10:40 /sbin/rc3.d/S01quota -> ../init.d/quota lrwxr-xr-x 1 root bin 14 Aug 30 10:51 /sbin/rc3.d/S04uucp -> ../init.d/uucp lrwxr-xr-x 1 root bin 18 Aug 30 10:40 /sbin/rc3.d/S08startlmf -> ../init.d/startlmf lrwxr-xr-x 1 root bin 16 Aug 30 10:40 /sbin/rc3.d/S09syslog -> ../init.d/syslog lrwxr-xr-x 1 root bin 16 Aug 30 10:40 /sbin/rc3.d/S10binlog -> ../init.d/binlog lrwxr-xr-x 1 root bin 17 Aug 30 10:44 /sbin/rc3.d/S11gateway -> ../init.d/gateway lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc3.d/S12route -> ../init.d/route lrwxr-xr-x 1 root bin 14 Aug 30 10:44 /sbin/rc3.d/S13rwho -> ../init.d/rwho lrwxr-xr-x 1 root bin 17 Aug 30 10:40 /sbin/rc3.d/S14settime -> ../init.d/settime lrwxr-xr-x 1 root bin 15 Aug 30 10:45 /sbin/rc3.d/S15named -> ../init.d/named lrwxr-xr-x 1 root bin 13 Aug 30 10:44 /sbin/rc3.d/S18nis -> ../init.d/nis lrwxr-xr-x 1 root bin 13 Aug 30 10:45 /sbin/rc3.d/S19nfs -> ../init.d/nfs lrwxr-xr-x 1 root bin 18 Aug 30 10:45 /sbin/rc3.d/S20nfsmount -> ../init.d/nfsmount lrwxr-xr-x 1 root bin 15 Aug 30 10:40 /sbin/rc3.d/S21audit -> ../init.d/audit lrwxr-xr-x 1 root bin 18 Aug 30 10:40 /sbin/rc3.d/S25preserve -> ../init.d/preserve lrwxr-xr-x 1 root bin 18 Aug 30 10:40 /sbin/rc3.d/S26security -> ../init.d/security lrwxr-xr-x 1 root bin 13 Aug 30 10:40 /sbin/rc3.d/S27sia -> ../init.d/sia lrwxr-xr-x 1 root bin 20 Aug 30 10:40 /sbin/rc3.d/S30rmtmpfiles -> ../init.d/rmtmpfiles lrwxr-xr-x 1 root bin 16 Aug 30 10:40 /sbin/rc3.d/S36presto -> ../init.d/presto lrwxr-xr-x 1 root bin 18 Aug 30 10:40 /sbin/rc3.d/S40sendmail -> ../init.d/sendmail lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc3.d/S45xntpd -> ../init.d/xntpd lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc3.d/S46timed -> ../init.d/timed lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc3.d/S49snmpd -> ../init.d/snmpd lrwxr-xr-x 1 root bin 18 Aug 30 10:56 /sbin/rc3.d/S50insightd -> ../init.d/insightd lrwxr-xr-x 1 root bin 16 Aug 30 10:56 /sbin/rc3.d/S51envmon -> ../init.d/envmon lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc3.d/S55inetd -> ../init.d/inetd lrwxr-xr-x 1 root bin 14 Aug 30 10:45 /sbin/rc3.d/S56dhcp -> ../init.d/dhcp lrwxr-xr-x 1 root bin 14 Aug 30 10:40 /sbin/rc3.d/S57cron -> ../init.d/cron lrwxr-xr-x 1 root bin 13 Aug 30 10:51 /sbin/rc3.d/S58lat -> ../init.d/lat lrwxr-xr-x 1 root bin 13 Aug 30 10:45 /sbin/rc3.d/S59lsm -> ../init.d/lsm lrwxr-xr-x 1 root bin 14 Aug 30 10:40 /sbin/rc3.d/S60motd -> ../init.d/motd lrwxr-xr-x 1 root bin 15 Aug 30 10:40 /sbin/rc3.d/S63write -> ../init.d/write lrwxr-xr-x 1 root bin 13 Aug 30 10:46 /sbin/rc3.d/S65lpd -> ../init.d/lpd lrwxr-xr-x 1 root bin 14 Aug 30 10:54 /sbin/rc3.d/S75acct -> ../init.d/acct lrwxr-xr-x 1 root bin 17 Aug 30 10:40 /sbin/rc3.d/S80crashdc -> ../init.d/crashdc lrwxr-xr-x 1 root bin 20 Aug 30 10:46 /sbin/rc3.d/S85vectored_x -> ../init.d/vectored_x lrwxr-xr-x 1 root bin 12 Aug 30 10:42 /sbin/rc3.d/S90ws -> ../init.d/ws lrwxr-xr-x 1 root bin 16 Aug 30 10:46 /sbin/rc3.d/S95xlogin -> ../init.d/xlogin lrwxrwxrwx 1 root bin 21 Sep 4 11:20 /sbin/rc3.d/S96killconsole -> ../init.d/killconsole
The following scripts are run by the init program when the system shuts down by using init:
lrwxr-xr-x 1 root bin 13 Aug 30 10:46 /sbin/rc2.d/K00lpd -> ../init.d/lpd lrwxr-xr-x 1 root bin 13 Aug 30 10:51 /sbin/rc2.d/K03lat -> ../init.d/lat lrwxr-xr-x 1 root bin 14 Aug 30 10:45 /sbin/rc2.d/K04dhcp -> ../init.d/dhcp lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc2.d/K05inetd -> ../init.d/inetd lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc2.d/K09snmpd -> ../init.d/snmpd lrwxr-xr-x 1 root bin 16 Aug 30 10:56 /sbin/rc2.d/K12envmon -> ../init.d/envmon lrwxr-xr-x 1 root bin 18 Aug 30 10:56 /sbin/rc2.d/K12insightd -> ../init.d/insightd lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc2.d/K15xntpd -> ../init.d/xntpd lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc2.d/K16timed -> ../init.d/timed lrwxr-xr-x 1 root bin 14 Aug 30 10:40 /sbin/rc2.d/K20cron -> ../init.d/cron lrwxr-xr-x 1 root bin 18 Aug 30 10:40 /sbin/rc2.d/K30sendmail -> ../init.d/sendmail lrwxr-xr-x 1 root bin 13 Aug 30 10:45 /sbin/rc2.d/K35nfs -> ../init.d/nfs lrwxr-xr-x 1 root bin 16 Aug 30 10:40 /sbin/rc2.d/K36presto -> ../init.d/presto lrwxr-xr-x 1 root bin 18 Aug 30 10:45 /sbin/rc2.d/K40nfsmount -> ../init.d/nfsmount lrwxr-xr-x 1 root bin 13 Aug 30 10:44 /sbin/rc2.d/K43nis -> ../init.d/nis lrwxr-xr-x 1 root bin 15 Aug 30 10:45 /sbin/rc2.d/K45named -> ../init.d/named lrwxr-xr-x 1 root bin 14 Aug 30 10:44 /sbin/rc2.d/K47rwho -> ../init.d/rwho lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc2.d/K48route -> ../init.d/route lrwxr-xr-x 1 root bin 17 Aug 30 10:44 /sbin/rc2.d/K49gateway -> ../init.d/gateway lrwxr-xr-x 1 root bin 16 Aug 30 10:40 /sbin/rc2.d/K50syslog -> ../init.d/syslog lrwxr-xr-x 1 root bin 14 Aug 30 10:51 /sbin/rc2.d/K51uucp -> ../init.d/uucp lrwxr-xr-x 1 root bin 15 Aug 30 10:40 /sbin/rc2.d/K52write -> ../init.d/write lrwxr-xr-x 1 root bin 16 Aug 30 10:40 /sbin/rc2.d/K53binlog -> ../init.d/binlog lrwxr-xr-x 1 root bin 14 Aug 30 10:44 /sbin/rc2.d/K55inet -> ../init.d/inet lrwxr-xr-x 1 root bin 15 Aug 30 10:40 /sbin/rc2.d/K57quota -> ../init.d/quota
The following scripts are run by the init program when the system shuts down by using init:
lrwxr-xr-x 1 root bin 17 Aug 30 10:40 /sbin/rc0.d/K00enlogin -> ../init.d/enlogin lrwxr-xr-x 1 root bin 13 Aug 30 10:46 /sbin/rc0.d/K05lpd -> ../init.d/lpd lrwxr-xr-x 1 root bin 13 Aug 30 10:51 /sbin/rc0.d/K07lat -> ../init.d/lat lrwxr-xr-x 1 root bin 15 Aug 30 10:40 /sbin/rc0.d/K08audit -> ../init.d/audit lrwxr-xr-x 1 root bin 14 Aug 30 10:45 /sbin/rc0.d/K09dhcp -> ../init.d/dhcp lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc0.d/K10inetd -> ../init.d/inetd lrwxr-xr-x 1 root bin 18 Aug 30 10:56 /sbin/rc0.d/K12insightd -> ../init.d/insightd lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc0.d/K14snmpd -> ../init.d/snmpd lrwxr-xr-x 1 root bin 16 Aug 30 10:56 /sbin/rc0.d/K16envmon -> ../init.d/envmon lrwxr-xr-x 1 root bin 16 Aug 30 10:46 /sbin/rc0.d/K19xlogin -> ../init.d/xlogin lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc0.d/K20xntpd -> ../init.d/xntpd lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc0.d/K21timed -> ../init.d/timed lrwxr-xr-x 1 root bin 14 Aug 30 10:40 /sbin/rc0.d/K22cron -> ../init.d/cron lrwxr-xr-x 1 root bin 18 Aug 30 10:40 /sbin/rc0.d/K25sendmail -> ../init.d/sendmail lrwxr-xr-x 1 root bin 13 Aug 30 10:45 /sbin/rc0.d/K30nfs -> ../init.d/nfs lrwxr-xr-x 1 root bin 16 Aug 30 10:40 /sbin/rc0.d/K31presto -> ../init.d/presto lrwxr-xr-x 1 root bin 18 Aug 30 10:45 /sbin/rc0.d/K35nfsmount -> ../init.d/nfsmount lrwxr-xr-x 1 root bin 13 Aug 30 10:44 /sbin/rc0.d/K38nis -> ../init.d/nis lrwxr-xr-x 1 root bin 15 Aug 30 10:45 /sbin/rc0.d/K40named -> ../init.d/named lrwxr-xr-x 1 root bin 14 Aug 30 10:44 /sbin/rc0.d/K42rwho -> ../init.d/rwho lrwxr-xr-x 1 root bin 15 Aug 30 10:44 /sbin/rc0.d/K43route -> ../init.d/route lrwxr-xr-x 1 root bin 17 Aug 30 10:44 /sbin/rc0.d/K44gateway -> ../init.d/gateway lrwxr-xr-x 1 root bin 16 Aug 30 10:40 /sbin/rc0.d/K45syslog -> ../init.d/syslog lrwxr-xr-x 1 root bin 14 Aug 30 10:51 /sbin/rc0.d/K46uucp -> ../init.d/uucp lrwxr-xr-x 1 root bin 15 Aug 30 10:40 /sbin/rc0.d/K47write -> ../init.d/write lrwxr-xr-x 1 root bin 16 Aug 30 10:40 /sbin/rc0.d/K48binlog -> ../init.d/binlog lrwxr-xr-x 1 root bin 14 Aug 30 10:44 /sbin/rc0.d/K50inet -> ../init.d/inet lrwxr-xr-x 1 root bin 13 Aug 30 10:45 /sbin/rc0.d/K51atm -> ../init.d/atm lrwxr-xr-x 1 root bin 15 Aug 30 10:40 /sbin/rc0.d/K52quota -> ../init.d/quota lrwxr-xr-x 1 root bin 13 Aug 30 10:45 /sbin/rc0.d/K59lsm -> ../init.d/lsm lrwxr-xr-x 1 root bin 14 Aug 30 10:40 /sbin/rc0.d/K96acct -> ../init.d/acct
Tuning Suggestion: The value of vm-ubcseqpercent is
recommended to be 20 %.
Use the sysconfigdb command or the Kernel Tuner to add the following to
/etc/sysconfigtab:
vm: vm-ubcseqpercent=20You must reboot the system in order to use the new value.
Tuning Suggestion: Change the value of vm-mapentries ( 200 ) to 16384.
Use the sysconfigdb command or the Kernel Tuner to add the following to
/etc/sysconfigtab:
vm: vm-mapentries=16384You must reboot the system in order to use the new value.
Tuning Suggestion: Change the value of vm-vpagemax ( 16384 ) to 131072.
Use the sysconfigdb command or the Kernel Tuner to add the following to
/etc/sysconfigtab:
vm: vm-vpagemax=131072You must reboot the system in order to use the new value.
Operational: Increase the value of maxusers ( 32 ) to at least 128.
Use the sysconfigdb command or the Kernel Tuner to add the following to
/etc/sysconfigtab:
proc: maxusers=128You must reboot the system in order to use the new value.
Note: The top and syd system monitoring tools, which are available in the public domain or on the Tru64 UNIX Freeware CD-ROM, may consume enough kernel memory to crash the system if they are being run continuously. Do not run these tools continuously, unless you apply patches to these tools that fix the problem.
Total memory = 131072 KB ( 128 MB ) ( 128 MB )
Kernel size, console and gh-chunks = 9432 KB ( 9 MB )
gh-chunks = 0 ( 0 KB ) ( 0 MB )
Total vm managed memory after boot = 121640 KB ( 118 MB )
current ubc size = 68464 KB ( 66 MB ) ( 56 % )
current wired memory = 24760 KB ( 24 MB ) ( 20 % )
current vm memory = 28856 KB ( 28 MB ) ( 23 % )
vm-page-free-target = 128 ( 1024 KB )
vm-page-free-optimal = 74 ( 592 KB )
vm-page-free-min = 20 ( 160 KB )
vm-page-free-reserved = 10 ( 80 KB )
ubc-maxpercent = 100 % ( 121640 KB ) ( 118 MB )
ubc-minpercent = 10 % ( 12164 KB ) ( 11 MB )
ubc-borrowpercent = 20 % ( 24328 KB ) ( 23 MB )
vm-ubcdirtypercent = 10 % ( 6846 KB ) ( 6 MB )
vm-ubcseqstartpercent = 50 % ( 60820 KB ) ( 59 MB )
vm-ubcseqpercent = 10 % of current UBC size, when UBC size
is greater than vm-ubcseqstartpercent ( 6082 KB ) ( 5 MB )
The UBC cache hit rate is 53 %.
Total Physical Memory = 128.00 M
= 16384 pages
Physical Memory Clusters:
start_pfn end_pfn type size_pages / size_bytes
0 256 pal 256 / 2.00M
256 16384 os 16128 / 126.00M
Physical Memory Use:
start_pfn end_pfn type size_pages / size_bytes
256 280 unixtable 24 / 192.00k
280 284 scavenge 4 / 32.00k
284 684 text 400 / 3.12M
684 766 data 82 / 656.00k
766 888 bss 122 / 976.00k
888 893 cfgmgmt 5 / 40.00k
893 918 unixtable 25 / 200.00k
918 932 pmap 14 / 112.00k
932 1179 vmtables 247 / 1.93M
1179 16384 managed 15205 / 118.79M
============================
Total Physical Memory Use: 16128 / 126.00M
Managed Pages Break Down:
free pages = 775
active pages = 1193
inactive pages = 1052
wired pages = 3071
ubc pages = 9119
==================
Total = 15210
WIRED Pages Break Down:
vm wired pages = 477
ubc wired pages = 1104
meta data pages = 483
malloc pages = 535
contig pages = 14
user ptepages = 438
kernel ptepages = 10
free ptepages = 9
==================
Total = 3070
Virtual Memory Statistics: (pagesize = 8192)
1193 active pages
1052 inactive pages
776 free pages
3070 wired pages
16463560 virtual memory page faults
3154341 copy-on-write page faults
8042307 zero fill page faults
99546 reattaches from reclaim list
2982882 pages paged in
4856 pages paged out
28842804 task and thread context switches
3563261 device interrupts
37339134 system calls
199127 forks
10246 vforks
Virtual Memory Statistics: (pagesize = 8192) procs memory pages intr cpu r w u act free wire fault cow zero react pin pout in sy cs us sy id 5 62 23 11K 764 3078 16M 3M 8M 99K 2M 4856 32 338 261 46 30 24 4 63 23 11K 754 3081 394 88 205 0 109 0 142 975 343 33 67 0 5 63 23 11K 593 3082 261 71 77 0 30 0 41 735 306 35 65 0 4 63 23 11K 753 3064 1114 282 425 0 237 0 46 1K 276 26 74 0 5 63 23 11K 594 3063 80 8 60 0 15 0 114 728 341 37 63 0
vmstat -f
199169 forks
10246 vforks
The sched_stat sleep 75 output:
hostname: node3.wickensonline.co.uk
processors: 1
command: sleep 75
start time: Wed Sep 5 12:52:53 2007
end time: Wed Sep 5 12:54:08 2007
Funnelling counts
unix master calls 0 resulting blocks 0
Scheduler Dispatch Statistics
cpu 0 local global idle | total percent
------------------------------------+-------------------
hot 0 20835 0 | 20835 97.2
warm 0 607 0 | 607 2.8
cold 0 0 0 | 0 0.0
------------------------------------+-------------------
total 0 21442 0 | 21442
percent 0.0 100.0 0.0
Scheduler Load Balancing
| 5-second averages
steal idle desired | current interrupt RT
cpu trys steals steals load | load % %
----+-------------------------------------------------------------------------
0 | 0 0 0 0.000 0.000 0.000 0.000
Processor Usage
cpu user nice system idle widle | scalls intr csw tbsyc
---+------------------------------------+--------------------------------------
0 | 36.3 0.0 63.7 0.0 0.0 | 63390 3847 21442 0
Memory usage by bucket:
bucket# element_size elements_in_use elements_free bytes_in_use fail_nowait
0 16 4319 1825 69104 0
1 32 716 820 22912 0
2 64 1558 106 99712 0
3 128 756 524 96768 0
4 256 426 470 109056 0
5 512 1228 436 628736 0
6 1024 6 10 6144 0
7 2048 8 28 16384 0
8 4096 4 8 16384 0
9 8192 48 7 393216 0
10 16384 3 4 49152 0
11 32768 2 0 65536 0
12 65536 15 0 983040 0
13 131072 0 0 0 0
14 262144 0 0 0 0
15 524288 1 0 524288 0
16 96 2281 524 218976 0
17 160 1468 266 234880 0
18 192 171 81 32832 0
19 320 113 87 36160 0
20 384 9 12 3456 0
21 448 2 16 896 0
22 576 6 8 3456 0
23 640 5 7 3200 0
24 704 2 9 1408 0
25 768 2 78 1536 0
26 896 103 14 92288 0
27 1152 210 105 241920 0
28 1344 2 4 2688 0
29 1600 16 14 25600 0
30 2688 57 12 153216 0
31 12288 3 7 36864 0
Total memory being used from buckets = 4169808 bytes
Total free memory in buckets = 1198992 bytes
Memory usage by type: Type and Number of bytes being used
SOCKET = 23040 PCB = 35520 ROUTETBL = 1504
IFADDR = 1216 SONAME = 3328 MBLK = 1024
STRHEAD = 3072 STRQUEUE = 9216 STRMODSW = 1920
STRSYNCQ = 2624 STREAMS = 1920 FILE = 10048
DEVBUF = 372224 PATHNAME = 112 KERNEL TBL = 137280
ADVFS = 1460992 IPM ADDR = 128 IFM ADDR = 320
VNODE = 595456 KALLOC = 61968 TEMP = 59504
PMAP = 22048 CRED = 5120 TASK = 145152
THREAD = 82432 SELQ = 14560 SVIPC = 96
MOUNT = 1280 NAMEI = 1024 MIPC = 86496
VMOBJ = 173792 VMANON = 58272 VMSEG = 8704
VMMAP = 11328 VMENTRY = 70080 FIFO = 112384
ANON = 111360 VMVPAGE = 6784 NCALLOUT = 12032
WS = 16384 SIGACT = 15776 THREADLOCK = 6528
DLI = 5824 VMSWAP = 280832
dbx version 3.11.10
Type 'help' for help.
stopped at [thread_block:2366 ,0xfffffc00002c53e0] Source not available
warning: Files compiled -g3: parameter values probably wrong
====== maxusers:
32
====== ubc_pages in Mbytes:
71
====== vm_page_free_min:
20
====== vm_page_free_optimal:
74
====== vm_page_free_target:
128
====== vm_perfsum:
struct {
vpf_pagefaults = 16487083
vpf_kpagefaults = 177585
vpf_cowfaults = 3160419
vpf_cowsteals = 14556002
vpf_zfod = 7873026
vpf_kzfod = 177585
vpf_pgiowrites = 4856
vpf_pgwrites = 10516
vpf_pgioreads = 2988758
vpf_pgreads = 4552
vpf_swapreclaims = 0
vpf_taskswapouts = 0
vpf_taskswapins = 0
vpf_vmpagesteal = 0
vpf_vmpagewrites = 3346
vpf_vmpagecleanrecs = 6162
vpf_vplmsteal = 213
vpf_vplmstealwins = 206
vpf_vpseqdrain = 41174
vpf_ubchit = 7202
vpf_ubcalloc = 1000915
vpf_ubcpushes = 0
vpf_ubcpagepushes = 0
vpf_ubcdirtywra = 0
vpf_ubcreclaim = 0
vpf_ubcpagesteal = 100719
vpf_ubclookups = 2138145
vpf_ubclookuphits = 1137230
vpf_reactivate = 99546
vpf_allocatedpages = 14770
vpf_vmwiredpages = 963
vpf_ubcwiredpages = 1064
vpf_mallocpages = 535
vpf_totalptepages = 465
vpf_contigpages = 14
vpf_rmwiredpages = 0
vpf_ubcpages = 9171
vpf_freepages = 435
vpf_vmcleanpages = 196
vpf_swapspace = 2231664
}
====== vm_perfcomp:
struct {
vpf_pagefaults = 227
vpf_kpagefaults = 1
vpf_cowfaults = 47
vpf_cowsteals = 555
vpf_zfod = 73
vpf_kzfod = 1
vpf_pgiowrites = 0
vpf_pgwrites = 0
vpf_pgioreads = 79
vpf_pgreads = 0
vpf_swapreclaims = 0
vpf_taskswapouts = 0
vpf_taskswapins = 0
vpf_vmpagesteal = 0
vpf_vmpagewrites = 0
vpf_vmpagecleanrecs = 0
vpf_vplmsteal = 0
vpf_vplmstealwins = 0
vpf_vpseqdrain = 0
vpf_ubchit = 0
vpf_ubcalloc = 1
vpf_ubcpushes = 0
vpf_ubcpagepushes = 0
vpf_ubcdirtywra = 0
vpf_ubcreclaim = 0
vpf_ubcpagesteal = 0
vpf_ubclookups = 67
vpf_ubclookuphits = 63
vpf_reactivate = 0
vpf_allocatedpages = 14670
vpf_vmwiredpages = 960
vpf_ubcwiredpages = 1014
vpf_mallocpages = 531
vpf_totalptepages = 466
vpf_contigpages = 10
vpf_rmwiredpages = 0
vpf_ubcpages = 9214
vpf_freepages = 531
vpf_vmcleanpages = 196
vpf_swapspace = 0
}
====== vm_tune:
struct {
vt_cowfaults = 4
vt_mapentries = 200
vt_maxvas = 1073741824
vt_maxwire = 16777216
vt_heappercent = 7
vt_anonklshift = 17
vt_anonklpages = 1
vt_vpagemax = 16384
vt_segmentation = 1
vt_ubcpagesteal = 24
vt_ubcdirtypercent = 10
vt_ubcseqstartpercent = 50
vt_ubcseqpercent = 10
vt_csubmapsize = 1048576
vt_ubcbuffers = 256
vt_syncswapbuffers = 128
vt_asyncswapbuffers = 4
vt_clustermap = 1048576
vt_clustersize = 65536
vt_zone_size = 0
vt_kentry_zone_size = 16777216
vt_syswiredpercent = 80
vt_inswappedmin = 1
}
====== *(vm_granhint_stats *)&gh_stats_store:
struct {
total_mappers = 0
shared_mappers = 0
unshared_mappers = 0
total_unmappers = 0
shared_unmappers = 0
unshared_unmappers = 0
unaligned_mappers = 0
access_violations = 0
unaligned_size_requests = 0
unaligned_attachers = 0
wired_bypass = 0
wired_returns = 0
}
The swapdefault file points to the primary swap device if immediate (eager) swap mode is enabled.
lrwxr-xr-x 1 root system 11 Aug 30 10:39 /sbin/swapdefault -> ../dev/rz0b
Swap partition /dev/rz0b (default swap):
Allocated space: 16384 pages (128MB)
In-use space: 808 pages ( 4%)
Free space: 15576 pages ( 95%)
Swap partition /dev/rz11c:
Allocated space: 2222905 pages (17366MB)
In-use space: 926 pages ( 0%)
Free space: 2221979 pages ( 99%)
Total swap allocation:
Allocated space: 2239289 pages (17494MB)
Reserved space: 6216 pages ( 0%)
In-use space: 1734 pages ( 0%)
Available space: 2233073 pages ( 99%)
Message Queues: T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME q 0 0x41e50190 --rw------- root system root system 0 0 16384 3 17575 12:43:24 12:43:24 6:16:53 Shared Memory: T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME *** No shared memory segments are currently defined *** Semaphores: T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME s 0 0x41e50190 --ra------- root system root system 1 6:16:53 6:16:53
The lockinfo command displays lock statistics on multiprocessor systems (SMP). Run lockinfo when the system has a normal steady-state workload.
The lockmode is 0 ; the lockinfo command was not run.
The lockinfo command requires that the value of lockmode be set to 2 or 4. Use the sysconfigdb command or the Kernel Tuner to add the following to /etc/sysconfigtab:
generic: lockmode=4You must reboot the system in order to use the new value. Running in lockmode 4 will have a negative impact on system performance, so you must return to the original value of lockmode after gathering the statistics
The kprofile Program Information
Information: The kprofile program profiles the kernel and provides input to the prof program.
To run kprofile, the system configuration file ( /usr/sys/conf/NODE3 ) must include the pfm pseudo-device, as follows:
pseudo-device pfmIn addition, profile devices must be created in the /dev directory by using the MAKEDEV command, as follows:
cd /dev MAKEDEV pfcntr MAKEDEV prfTo profile the kernel, reboot the system and ensure that it has a normal steady-state workload. Run the kprofile program for at least 1 minute and up to several minutes. Use Ctrl-C to exit the program. The kprofile program creates the kmon.out file, which is used as input to the prof program:
prof /vmunix kmon.outThe prof program displays the profile data for the workload.
vm-maxvas= 1073741824 ( 1024 MB )
max-per-proc-address-space= 1073741824 ( 1024 MB )
max-per-proc-data-size= 1073741824 ( 1024 MB )
max-per-proc-stack-size= 33554432 ( 32 MB )
per-proc-address-space= 1073741824 ( 1024 MB )
per-proc-data-size= 134217728 ( 128 MB )
per-proc-stack-size= 2097152 ( 2 MB )
Unaligned Access Message Control system settings (uac s output):
system printing is on
Unaligned Access Message Control process settings (uac p output):
parent printing is on
fixup is on
sigbus is off
system printing is on
parent printing is on
emulation is on
verbose is off
fat binary is on
12:54 up 1 day, 6:38, 4 users, load average: 3.31, 3.19, 3.04
0 on-line since 09/04/2007 06:17:12
number of processor sets on system = 1 pset_id # cpus # pids # threads load_av created 0 1 55 93 3.20 09/04/2007 06:17:12 total number of processors on system = 1 cpu # running boot_cpu pset_id assigned_to_pset 0 1 1 0 09/04/2007 06:17:12
Configuration: -Processes not explicitly defined in the database are not class scheduled. -If the processor has some idle time, class scheduled processes are allowed to exceed their cpu percentage. -The class scheduler will check class CPU usage every 1 seconds. Class scheduler status: disabled Classes: changes saved
Process dbx output:
dbx version 3.11.10 Type 'help' for help. stopped at [thread_block:2366 ,0xfffffc00002c53e0] Source not available warning: Files compiled -g3: parameter values probably wrong ====== nproc: 276 ====== task_inswapped_queue_count: 54 ====== task_outswapped_queue_count: 0
Process kdbx cpustat output:
dbx version 3.11.10
Type 'help' for help.
stopped at [thread_block:2366 ,0xfffffc00002c53e0] Source not available
warning: Files compiled -g3: parameter values probably wrong
Cpu User (%) Nice (%) System (%) Idle (%) Wait (%)
===== ========== ========== ========== ========== ==========
0 45.73 0.00 29.87 24.34 0.05
UID PID PPID CP PRI NI VSZ RSS WCHAN S TTY TIME COMMAND
0 0 0 0 38 -6 144M 7.6M * R < ?? 4:02.96 [kernel idle]
0 1 0 0 44 0 496K 40K pause S ?? 0:23.42 /sbin/init -a
0 3 1 0 44 0 1.04M 520K sv_msg_ I ?? 0:00.25 /sbin/kloadsrv
0 28 1 1 44 0 1.67M 56K pause S ?? 0:49.40 /sbin/update
0 151 1 0 44 0 1.71M 112K event S ?? 0:00.45 /usr/sbin/syslogd
0 155 1 0 44 0 1.74M 56K event I ?? 0:00.25 /usr/sbin/binlogd
0 217 1 0 44 0 1.71M 72K event I ?? 0:00.40 /usr/sbin/routed -q
0 299 1 0 44 0 1.92M 152K event I ?? 0:00.16 /sbin/named -b /etc/namedb/named.boot
0 335 1 0 44 0 2.21M 0K event I ?? 0:00.03 /usr/sbin/portmap
0 337 1 0 44 0 1.67M 8K 5feab0 S ?? 0:00.02 /usr/sbin/nfsiod 7
0 408 1 0 44 0 2.36M 104K event S ?? 0:00.98 sendmail: accepting connections on
0 451 1 0 44 0 1.92M 88K event S ?? 0:01.14 /usr/sbin/snmpd
0 461 1 0 44 0 2.52M 96K event S ?? 0:00.72 /usr/sbin/os_mibs
0 463 1 0 44 0 2.45M 56K event S ?? 0:00.50 /usr/sbin/svrSystem_mib
0 464 1 0 44 0 2.43M 80K event S ?? 0:01.37 /usr/sbin/svrMgt_mib
0 465 1 0 44 0 3.00M 136K event S ?? 0:04.60 /usr/sbin/cpq_mibs
0 474 1 0 44 0 1.75M 16K event I ?? 0:00.12 /usr/sbin/inetd
0 483 1 0 44 0 6.13M 432K * S ?? 1:18.58 /usr/share/sysman/bin/insightd
0 509 1 0 44 0 3.40M 8K 6460c94 I ?? 0:00.07 /usr/sbin/cron
0 541 1 0 44 0 1.82M 8K event I ?? 0:00.01 /usr/lbin/lpd
0 574 1 0 44 0 4.42M 8K event I ?? 0:00.44 /usr/dt/bin/dtlogin -daemon
0 579 574 0 42 -2 7.77M 112K event I < ?? 0:02.36 /usr/bin/X11/X :0 -auth /var/dt/authdir/authfiles/A:0-aaarEa
0 580 574 0 44 0 4.42M 8K 794e094 I ?? 0:00.04 dtlogin <:0> -daemon
0 593 580 0 44 0 8.95M 0K event I ?? 0:00.80 dtgreet -display :0
0 710 474 0 44 0 1.83M 120K event S ?? 0:05.06 telnetd
0 774 844 0 0 -44 0K 0K - < ?? 0:00.00 <defunct>
0 844 1 222 44 0 2.16M 448K - R ?? 39:19.14 /usr/local/gcc-3.4.6-built/gcc/fixinc/fixincl
0 893 844 0 44 0 2.16M 136K 6a94494 I ?? 0:00.09 /bin/sh
0 930 844 0 0 -44 0K 0K - < ?? 0:00.00 <defunct>
0 3587 474 0 44 0 1.83M 8K event I ?? 0:03.67 telnetd
0 8381 474 0 44 0 1.83M 56K event S ?? 0:09.59 telnetd
0 28347 1 0 44 0 2.16M 8K 4627094 I ?? 0:00.11 /bin/sh
0 31586 474 0 44 0 1.83M 64K event S ?? 0:00.41 telnetd
0 17928 1 0 44 0 504K 0K ttyin I + console 0:00.13 /usr/sbin/getty console console vt100
0 14661 31764 0 44 0 6.66M 4.8M wait I + ttyp0 0:18.67 ksh -p /usr/sbin/sys_check
0 22314 14661 12 44 0 6.66M 4.7M - R + ttyp0 0:03.72 ksh -p /usr/sbin/sys_check - process none 10
0 22499 22314 0 44 0 2.04M 496K - R + ttyp0 0:00.10 ps alxww
0 22831 22314 0 0 -44 0K 0K - <+ ttyp0 0:00.00 <defunct>
0 30537 31857 0 44 0 2.16M 8K wait I ttyp0 0:00.06 -sh (sh)
0 31764 30537 0 44 0 3.01M 416K wait I ttyp0 0:00.52 bash
13 31857 31586 0 44 0 2.16M 16K wait I ttyp0 0:00.12 -sh (sh)
0 3482 3588 0 44 0 2.16M 8K tty I + ttyp1 0:00.13 sh
13 3588 3587 0 44 0 2.16M 8K wait I + ttyp1 0:00.12 -sh (sh)
13 8388 8381 0 44 0 2.16M 8K wait I + ttyp2 0:00.13 -sh (sh)
0 8903 8388 0 44 0 2.16M 16K wait I + ttyp2 0:00.18 -sh (sh)
0 16911 8903 4 44 0 2.16M 112K wait S + ttyp2 1:49.10 -sh (sh)
0 22059 16911 2 44 0 1.67M 128K - S + ttyp2 0:00.01 sleep 10
13 764 710 0 44 0 2.16M 128K wait I ttyp3 0:00.12 -sh (sh)
0 846 764 0 44 0 2.16M 168K wait I ttyp3 0:00.20 -sh (sh)
0 8105 22259 0 44 0 3.68M 1.9M wait I ttyp3 0:01.51 make bootstrap
0 8396 22259 0 44 0 1.69M 152K - S + ttyp3 0:00.13 tail -f nohup.out
0 15927 8105 0 44 0 2.16M 192K wait I ttyp3 0:00.03 /bin/sh -c test ! -f gcc/Makefile || exit 0; \ [ -d gcc ] || mkdir gcc; \ r=`${PWDCMD-pwd}`; export r; \ s=`cd ../gcc-3.4.6; ${PWDCMD-pwd}`; export s; \ CC="cc"; export CC; \ CFLAGS="-g"; export CFLAGS; \ CONFIG_SHELL="/bin/sh"; export CONFIG_SHELL; \ CXX="c++"; export CXX; \ CXXFLAGS="-g -O2"; export CXXFLAGS; \ TOPLEVEL_CONFIGURE_ARGUMENTS="../gcc-3.4.6/configure --enable-languages=c,c++ --disable-libgcj"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ AR="ar"; export AR; \ AS="as"; export AS; \ CC_FOR_BUILD="cc"; export CC_FOR_BUILD; \ DLLTOOL="dlltool"; export DLLTOOL; \ LD="ld"; export LD; \ NM="nm"; export NM; \ RANLIB="ranlib"; export RANLIB; \ WINDRES="windres"; export WINDRES; \ OBJCOPY=""; export OBJCOPY; \ OBJDUMP=""; export OBJDUMP; \ SET_GCC_LIB_PATH_CMD="LD_LIBRARY_PATH=/usr/local/gcc-3.4.6-built/gcc; export LD_LIBRARY_PATH;"; export SET_GCC_LIB_PATH_CMD; \ LD_LIBRARY_PATH=/usr/local/gcc-3.4.6-built/gcc; export LD_LIBRARY_PATH; \ echo Configuring in gcc; \ cd gcc || exit 1; \ case ../gcc-3.4.6 in \ \.) \ srcdiroption="--srcdir=."; \ libsrcdir=".";; \ /* | [A-Za-z]:[\\/]*) \ srcdiroption="--srcdir=../gcc-3.4.6/gcc"; \ libsrcdir="$s/gcc";; \ *) \ srcdiroption="--srcdir=../../gcc-3.4.6/gcc"; \ libsrcdir="$s/gcc";; \ esac; \ /bin/sh ${libsrcdir}/configure \ --cache-file=./config.cache --build=alpha-dec-osf4.0g --host=alpha-dec-osf4.0g --target=alpha-dec-osf4.0g --with-stabs --enable-languages=c,c++ --disable-libgcj --with-gcc-version-trigger=/usr/local/gcc-3.4.6/gcc/version.c --program-transform-name='s,y,y,' ${srcdiroption} \ || exit 1
0 16132 15927 234 44 0 3.29M 1.5M - R ttyp3 2:48.45 /bin/sh /usr/local/gcc-3.4.6/gcc/configure --cache-file=./config.cache --build=alpha-dec-osf4.0g --host=alpha-dec-osf4.0g --target=alpha-dec-osf4.0g --with-stabs --enable-languages=c,c++ --disable-libgcj --with-gcc-version-trigger=/usr/local/gcc-3.4.6/gcc/version.c --program-transform-name=s,y,y, --srcdir=../../gcc-3.4.6/gcc
0 22259 846 0 44 0 3.01M 464K wait I ttyp3 0:01.06 bash
0 22317 16132 0 0 -44 0K 0K - < ttyp3 0:00.00 <defunct>
0 22639 1 223 44 0 11.7M 4.4M - R + ttyp4 0:01.47 dbx -vd -k /vmunix
PID MINFLT MAJFLT NSWAP INBLK OUBLK MSGSND MSGRCV NSIGS VCSW IVCSW S TTY TIME COMMAND
0 0 0 0 81 1600 0 0 0 13615965 3689060 R < ?? 4:02.96 kernel idle
1 283 21 0 188 88 0 0 39569 39681 3091 S ?? 0:23.42 init
3 232 64 0 129 0 0 0 0 687 124 I ?? 0:00.25 kloadsrv
28 73 0 0 46 53731 0 0 3675 13615 2853 S ?? 0:49.40 update
151 36 68 0 44 176 0 113 3673 3906 58 S ?? 0:00.45 syslogd
155 43 45 0 60 807 0 0 0 471 34 I ?? 0:00.25 binlogd
217 82 6 0 10 0 1 1 3672 3686 27 I ?? 0:00.40 routed
299 144 190 0 166 1 106 15 30 341 25 I ?? 0:00.16 named
335 18 0 0 0 0 10 10 0 3 15 I ?? 0:00.03 portmap
337 8 0 0 0 0 0 0 0 1837 0 S ?? 0:00.02 nfsiod
408 893 79 0 64 2 1 0 245 2103 117 S ?? 0:00.98 sendmail
451 93 8 0 10 0 6256 6290 0 14384 117 S ?? 0:01.14 snmpd
461 95 11 0 39 2 32 64 0 3757 84 S ?? 0:00.72 os_mibs
463 74 5 0 2 0 3149 6298 0 6303 50 S ?? 0:00.50 svrSystem_mib
464 101 5 0 6 1 3062 6122 0 28220 111 S ?? 0:01.37 svrMgt_mib
465 154 7 0 60 1 6 12 11010 11033 322 S ?? 0:04.60 cpq_mibs
474 78 51 0 26 1 10 10 8 99 43 I ?? 0:00.12 inetd
483 389 30 0 82 61 1840 7 0 690039 199449 S ?? 1:18.58 insightd
509 79 16 0 16 8 0 0 4 42 5 I ?? 0:00.07 cron
541 27 0 0 0 8 1 0 0 1 2 I ?? 0:00.01 lpd
574 71 0 0 21 5 0 0 1 25 59 I ?? 0:00.44 dtlogin
579 587 63 0 647 24 251 258 0 616 418 I < ?? 0:02.36 Xdec
580 113 0 0 15 3 17 21 0 28 29 I ?? 0:00.04 dtlogin
593 524 0 0 336 14 255 311 0 452 180 I ?? 0:00.80 dtgreet
710 95 0 0 3 6 18266 1887 0 19273 712 S ?? 0:05.06 telnetd
774 - - - - - - - - - - < ?? 0:00.00 <defunct>
844 936 0 0 738 5 1 0 0 601 390053 R ?? 39:19.14 fixincl
893 39 0 0 0 1 1 0 0 41 28 I ?? 0:00.09 sh
930 - - - - - - - - - - < ?? 0:00.00 <defunct>
3587 56 8 0 3 8 9537 318 0 9558 336 I ?? 0:03.67 telnetd
8381 93 8 0 16 7 15475 335 0 15275 1242 S ?? 0:09.59 telnetd
28347 121 0 0 0 1 1 0 0 57 16 I ?? 0:00.11 sh
31586 63 10 0 15 6 769 539 0 1367 72 S ?? 0:00.41 telnetd
17928 85 12 0 50 7 0 0 1 64 24 I + console 0:00.13 getty
14661 1521 0 0 0 61 1 0 501 285 1072 I + ttyp0 0:18.67 sys_check
21415 - - - - - - - - - - <+ ttyp0 0:00.00 <defunct>
22314 978 0 0 1 19 1 0 52 13 477 R + ttyp0 0:03.83 sys_check
22499 - - - - - - - - - - <+ ttyp0 0:00.00 <defunct>
22795 84 0 0 0 0 1 0 0 0 3 R + ttyp0 0:00.03 ps
30537 97 0 0 3 0 3 0 0 9 13 I ttyp0 0:00.06 sh
31764 725 11 0 61 7 1 0 22 475 72 I ttyp0 0:00.52 bash
31857 134 0 0 25 32 2 0 0 35 26 I ttyp0 0:00.12 sh
3482 206 20 0 0 11 3 0 1 55 38 I + ttyp1 0:00.13 sh
3588 130 0 0 4 29 2 0 0 14 21 I + ttyp1 0:00.12 sh
8388 130 0 0 13 28 2 0 0 24 23 I + ttyp2 0:00.13 sh
8903 242 0 0 21 2 3 0 1 60 45 I + ttyp2 0:00.18 sh
16911 135115 0 0 0 0 0 0 0 27007 22551 S + ttyp2 1:49.10 sh
22059 27 0 0 0 0 1 0 0 1 1 S + ttyp2 0:00.01 sleep
764 130 0 0 2 23 2 0 0 13 17 I ttyp3 0:00.12 sh
846 278 0 0 7 6 3 0 1 70 65 I ttyp3 0:00.20 sh
8105 534 0 0 2 5 2 0 4 7 288 I ttyp3 0:01.51 make
8396 104 0 0 0 1 1 0 0 1668 15 S + ttyp3 0:00.13 tail
15927 85 0 0 0 0 1 0 0 4 3 I ttyp3 0:00.03 sh
16132 1169 0 0 425 8226 1 0 0 1422 22679 R ttyp3 2:48.45 sh
22259 1402 0 0 284 11 1 0 48 987 137 I ttyp3 0:01.06 bash
22317 - - - - - - - - - - < ttyp3 0:00.00 <defunct>
22639 599 0 0 1 0 1 0 0 6 321 R + ttyp4 0:01.47 dbx
PID USER %CPU PRI SCNT WCHAN USER SYSTEM S TTY TIME COMMAND
0 root 0.0 38 0 * 0:00.00 4:02.96 R < ?? 4:02.96 kernel idle
0.0 63 0 - 0:00.00 0:00.00 R N 0:00.00
0.0 38 0 malloc_ 0:00.00 0:07.14 U < 0:07.14
0.0 32 0 4f7ec8 0:00.00 1:12.73 U < 1:12.73
0.0 32 0 4f80ac 0:00.00 0:00.40 U < 0:00.40
0.0 38 0 ss_tmo 0:00.00 0:00.39 S < 0:00.39
0.0 38 0 ss_tmo 0:00.00 0:00.42 S < 0:00.42
0.0 33 0 netisr 0:00.00 1:31.88 S < 1:31.88
0.0 33 0 88ce3a28 0:00.00 0:17.09 S < 0:17.09
0.0 32 0 4cefb0 0:00.00 0:00.00 U < 0:00.00
0.0 32 0 4d0820 0:00.00 0:00.33 U < 0:00.33
0.0 32 0 4d0a20 0:00.00 0:00.00 U < 0:00.00
0.0 38 0 5ffca0 0:00.00 0:00.01 U < 0:00.01
0.0 38 0 7a74040 0:00.00 0:00.00 U < 0:00.00
0.0 38 0 7a74440 0:00.00 0:00.09 U < 0:00.09
0.0 42 0 ubc_dir 0:00.00 0:00.51 U 0:00.51
0.0 42 0 5fa2c0 0:00.00 0:00.34 U 0:00.34
0.0 38 0 7f80f70 0:00.00 0:33.05 U < 0:33.05
0.0 38 0 7f81030 0:00.00 0:00.29 U < 0:00.29
0.0 38 0 7f81090 0:00.00 0:01.67 U < 0:01.67
0.0 37 0 627680 0:00.00 0:00.00 U < 0:00.00
0.0 37 0 627690 0:00.00 0:00.00 U < 0:00.00
0.0 38 0 5ff428 0:00.00 0:14.42 U < 0:14.42
0.0 32 0 6276b0 0:00.00 0:00.00 U < 0:00.00
0.0 37 0 6276c0 0:00.00 0:00.00 U < 0:00.00
0.0 37 0 5f8068 0:00.00 0:00.00 U < 0:00.00
0.0 0 0 627650 0:00.00 0:00.00 U < 0:00.00
0.0 42 0 25d860 0:00.00 0:00.05 U < 0:00.05
0.0 38 0 5faa30 0:00.00 0:00.84 U < 0:00.84
0.0 44 0 nfsiod_ 0:00.00 0:00.00 I 0:00.00
0.0 44 0 nfsiod_ 0:00.00 0:00.00 I 0:00.00
0.0 44 0 nfsiod_ 0:00.00 0:00.00 I 0:00.00
0.0 44 0 nfsiod_ 0:00.00 0:00.00 I 0:00.00
0.0 44 0 nfsiod_ 0:00.00 0:00.00 I 0:00.00
0.0 44 0 nfsiod_ 0:00.00 0:00.00 I 0:00.00
0.0 44 0 nfsiod_ 0:00.00 0:00.00 I 0:00.00
1 root 0.0 44 0 pause 0:01.07 0:22.35 S ?? 0:23.42 init
3 root 0.0 44 0 sv_msg_ 0:00.12 0:00.13 I ?? 0:00.25 kloadsrv
28 root 0.1 44 0 pause 0:00.12 0:49.28 S ?? 0:49.40 update
151 root 0.0 44 0 event 0:00.06 0:00.40 S ?? 0:00.45 syslogd
155 root 0.0 44 0 event 0:00.01 0:00.23 I ?? 0:00.25 binlogd
217 root 0.0 44 0 event 0:00.08 0:00.32 I ?? 0:00.40 routed
299 root 0.0 44 0 event 0:00.05 0:00.10 I ?? 0:00.16 named
335 root 0.0 44 0 event 0:00.01 0:00.02 I ?? 0:00.03 portmap
337 root 0.0 44 0 5feab0 0:00.00 0:00.02 S ?? 0:00.02 nfsiod
408 root 0.0 44 0 event 0:00.02 0:00.95 S ?? 0:00.98 sendmail
451 root 0.0 44 0 event 0:00.39 0:00.74 S ?? 0:01.14 snmpd
461 root 0.0 44 0 event 0:00.22 0:00.50 S ?? 0:00.72 os_mibs
463 root 0.0 44 0 event 0:00.15 0:00.35 S ?? 0:00.50 svrSystem_mib
464 root 0.0 44 0 event 0:00.39 0:00.98 S ?? 0:01.37 svrMgt_mib
465 root 0.0 44 0 event 0:02.31 0:02.28 S ?? 0:04.60 cpq_mibs
474 root 0.0 44 0 event 0:00.03 0:00.09 I ?? 0:00.12 inetd
483 root 0.0 44 0 * 0:58.96 0:19.62 S ?? 1:18.58 insightd
0.0 44 0 socket 0:16.02 0:05.06 S 0:21.08
0.0 44 0 nxmbloc 0:00.17 0:00.16 S 0:00.33
0.0 42 0 socket 0:00.06 0:00.04 I 0:00.10
0.0 44 0 usleep 0:15.14 0:05.17 S 0:20.31
0.0 44 0 usleep 0:14.77 0:04.84 S 0:19.61
0.0 44 0 nxmidle 0:10.50 0:03.89 S 0:14.39
509 root 0.0 44 0 6460c94 0:00.01 0:00.06 I ?? 0:00.07 cron
541 root 0.0 44 0 event 0:00.00 0:00.01 I ?? 0:00.01 lpd
574 root 0.0 44 0 event 0:00.16 0:00.28 I ?? 0:00.44 dtlogin
579 root 0.0 42 0 event 0:01.14 0:01.22 I < ?? 0:02.36 Xdec
580 root 0.0 44 0 794e094 0:00.01 0:00.04 I ?? 0:00.04 dtlogin
593 root 0.0 44 0 event 0:00.58 0:00.21 I ?? 0:00.80 dtgreet
710 root 0.0 44 0 event 0:00.83 0:04.23 S ?? 0:05.06 telnetd
774 root 0.0 0 0 - 0:00.00 0:00.00 < ?? 0:00.00 <defunct>
844 root 15.7 44 0 - 38:58.00 0:21.17 R ?? 39:19.17 fixincl
893 root 0.0 44 0 6a94494 0:00.05 0:00.04 I ?? 0:00.09 sh
930 root 0.0 0 0 - 0:00.00 0:00.00 < ?? 0:00.00 <defunct>
3587 root 0.0 44 0 event 0:00.67 0:03.00 I ?? 0:03.67 telnetd
8381 root 0.0 44 0 event 0:02.88 0:06.71 S ?? 0:09.59 telnetd
28347 root 0.0 44 0 4627094 0:00.05 0:00.06 I ?? 0:00.11 sh
31586 root 0.0 44 0 event 0:00.05 0:00.35 S ?? 0:00.41 telnetd
17928 root 0.0 44 0 ttyin 0:00.02 0:00.12 I + console 0:00.13 getty
14661 root 0.0 44 0 wait 0:02.26 0:16.41 I + ttyp0 0:18.67 sys_check
21415 root 0.0 0 0 - 0:00.00 0:00.00 <+ ttyp0 0:00.00 <defunct>
21506 root 0.0 44 0 - 0:00.00 0:00.02 R + ttyp0 0:00.02 ps
22023 root 0.0 0 0 - 0:00.00 0:00.00 <+ ttyp0 0:00.00 <defunct>
22314 root 9.9 44 0 - 0:01.92 0:02.05 R + ttyp0 0:03.97 sys_check
22499 root 0.0 0 0 - 0:00.00 0:00.00 <+ ttyp0 0:00.00 <defunct>
22795 root 0.0 0 0 - 0:00.00 0:00.00 <+ ttyp0 0:00.00 <defunct>
30537 root 0.0 44 0 wait 0:00.02 0:00.04 I ttyp0 0:00.06 sh
31764 root 0.0 44 0 wait 0:00.14 0:00.38 I ttyp0 0:00.52 bash
31857 msw 0.0 44 0 wait 0:00.03 0:00.09 I ttyp0 0:00.12 sh
3482 root 0.0 44 0 tty 0:00.03 0:00.11 I + ttyp1 0:00.13 sh
3588 msw 0.0 44 0 wait 0:00.02 0:00.10 I + ttyp1 0:00.12 sh
8388 msw 0.0 44 0 wait 0:00.03 0:00.10 I + ttyp2 0:00.13 sh
8903 root 0.0 44 0 wait 0:00.03 0:00.15 I + ttyp2 0:00.18 sh
16911 root 0.2 44 0 wait 0:03.39 1:45.71 S + ttyp2 1:49.10 sh
22059 root 0.1 44 0 - 0:00.00 0:00.01 S + ttyp2 0:00.01 sleep
764 msw 0.0 44 0 wait 0:00.03 0:00.09 I ttyp3 0:00.12 sh
846 root 0.0 44 0 wait 0:00.03 0:00.17 I ttyp3 0:00.20 sh
8105 root 0.0 44 0 wait 0:01.40 0:00.11 I ttyp3 0:01.51 make
8396 root 0.0 44 0 - 0:00.01 0:00.12 S + ttyp3 0:00.13 tail
15927 root 0.0 44 0 wait 0:00.01 0:00.03 I ttyp3 0:00.03 sh
16132 root 17.1 44 0 - 0:05.14 2:43.38 R ttyp3 2:48.52 sh
22140 root 0.0 0 0 - 0:00.00 0:00.00 < ttyp3 0:00.00 <defunct>
22259 root 0.0 44 0 wait 0:00.24 0:00.81 I ttyp3 0:01.06 bash
PID USER %CPU PRI UPR NI PPR PSR POL PSET S TTY TIME COMMAND
0 root 0.0 38 38 -6 25 ~0 TS 0 R < ?? 4:02.96 kernel idle
0.0 63 63 19 0 ~0 TS 0 R N 0:00.00
0.0 38 38 -6 25 0 TS 0 U < 0:07.14
0.0 32 32 -12 31 0 RR 0 U < 1:12.73
0.0 32 32 -12 31 0 TS 0 U < 0:00.40
0.0 38 38 -6 25 0 TS 0 S < 0:00.39
0.0 38 38 -6 25 0 TS 0 S < 0:00.42
0.0 33 33 -11 30 0 RR 0 S < 1:31.88
0.0 33 33 -11 30 ~0 RR 0 S < 0:17.09
0.0 32 32 -12 31 0 RR 0 U < 0:00.00
0.0 32 32 -12 31 0 RR 0 U < 0:00.33
0.0 32 32 -12 31 0 RR 0 U < 0:00.00
0.0 38 38 -6 25 0 TS 0 U < 0:00.01
0.0 38 38 -6 25 ~0 TS 0 U < 0:00.00
0.0 38 38 -6 25 0 TS 0 U < 0:00.09
0.0 42 44 0 21 0 TS 0 U 0:00.51
0.0 42 44 0 21 0 TS 0 U 0:00.34
0.0 38 38 -6 25 0 TS 0 U < 0:33.05
0.0 38 38 -6 25 0 TS 0 U < 0:00.29
0.0 38 38 -6 25 0 TS 0 U < 0:01.67
0.0 37 37 -7 26 0 RR 0 U < 0:00.00
0.0 37 37 -7 26 0 RR 0 U < 0:00.00
0.0 38 38 -6 25 0 RR 0 U < 0:14.42
0.0 32 32 -12 31 0 RR 0 U < 0:00.00
0.0 37 37 -7 26 0 RR 0 U < 0:00.00
0.0 37 37 -7 26 0 RR 0 U < 0:00.00
0.0 0 0 -44 63 0 FF 0 U < 0:00.00
0.0 42 42 -2 21 0 TS 0 U < 0:00.05
0.0 38 38 -6 25 0 TS 0 U < 0:00.84
0.0 44 44 0 19 0 TS 0 I 0:00.00
0.0 44 44 0 19 0 TS 0 I 0:00.00
0.0 44 44 0 19 0 TS 0 I 0:00.00
0.0 44 44 0 19 0 TS 0 I 0:00.00
0.0 44 44 0 19 0 TS 0 I 0:00.00
0.0 44 44 0 19 0 TS 0 I 0:00.00
0.0 44 44 0 19 0 TS 0 I 0:00.00
1 root 0.0 44 44 0 19 0 TS 0 S ?? 0:23.42 init
3 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.25 kloadsrv
28 root 0.0 44 44 0 19 0 TS 0 S ?? 0:49.40 update
151 root 0.0 44 44 0 19 0 TS 0 S ?? 0:00.45 syslogd
155 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.25 binlogd
217 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.40 routed
299 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.16 named
335 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.03 portmap
337 root 0.0 44 44 0 19 0 TS 0 S ?? 0:00.02 nfsiod
408 root 0.0 44 44 0 19 0 TS 0 S ?? 0:00.98 sendmail
451 root 0.0 44 44 0 19 0 TS 0 S ?? 0:01.14 snmpd
461 root 0.0 44 44 0 19 0 TS 0 S ?? 0:00.72 os_mibs
463 root 0.0 44 44 0 19 0 TS 0 S ?? 0:00.50 svrSystem_mib
464 root 0.0 44 44 0 19 0 TS 0 S ?? 0:01.37 svrMgt_mib
465 root 0.0 44 44 0 19 0 TS 0 S ?? 0:04.60 cpq_mibs
474 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.12 inetd
483 root 0.0 44 44 0 19 0 TS 0 S ?? 1:18.58 insightd
0.0 44 44 0 19 0 TS 0 S 0:21.08
0.0 44 44 0 19 0 RR 0 S 0:00.33
0.0 42 44 0 21 0 TS 0 I 0:00.10
0.0 44 44 0 19 0 TS 0 S 0:20.31
0.0 44 44 0 19 0 TS 0 S 0:19.61
0.0 44 44 0 19 0 TS 0 S 0:14.39
509 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.07 cron
541 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.01 lpd
574 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.44 dtlogin
579 root 0.0 42 42 -2 21 0 TS 0 I < ?? 0:02.36 Xdec
580 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.04 dtlogin
593 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.80 dtgreet
710 root 0.0 44 44 0 19 0 TS 0 S ?? 0:05.06 telnetd
774 root 0.0 0 0 -44 63 0 ?? 0 < ?? 0:00.00 <defunct>
844 root 12.2 44 44 0 19 0 TS 0 R ?? 39:19.30 fixincl
893 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.09 sh
930 root 0.0 0 0 -44 63 0 ?? 0 < ?? 0:00.00 <defunct>
3587 root 0.0 44 44 0 19 0 TS 0 I ?? 0:03.67 telnetd
8381 root 0.0 44 44 0 19 0 TS 0 S ?? 0:09.59 telnetd
28347 root 0.0 44 44 0 19 0 TS 0 I ?? 0:00.11 sh
31586 root 0.0 44 44 0 19 0 TS 0 S ?? 0:00.41 telnetd
17928 root 0.0 44 44 0 19 0 TS 0 I + console 0:00.13 getty
14661 root 0.0 44 44 0 19 0 TS 0 I + ttyp0 0:18.67 sys_check
21415 root 0.0 0 0 -44 63 0 ?? 0 <+ ttyp0 0:00.00 <defunct>
21506 root 0.0 0 0 -44 63 0 ?? 0 <+ ttyp0 0:00.00 <defunct>
22023 root 0.0 0 0 -44 63 0 ?? 0 <+ ttyp0 0:00.00 <defunct>
22216 root 0.0 44 44 0 19 0 TS 0 R + ttyp0 0:00.07 ps
22314 root 12.4 44 44 0 19 0 TS 0 R + ttyp0 0:04.11 sys_check
22499 root 0.0 0 0 -44 63 0 ?? 0 <+ ttyp0 0:00.00 <defunct>
22739 root 0.0 0 0 -44 63 0 ?? 0 <+ ttyp0 0:00.00 <defunct>
22795 root 0.0 0 0 -44 63 0 ?? 0 <+ ttyp0 0:00.00 <defunct>
30537 root 0.0 44 44 0 19 0 TS 0 I ttyp0 0:00.06 sh
31764 root 0.0 44 44 0 19 0 TS 0 I ttyp0 0:00.52 bash
31857 msw 0.0 44 44 0 19 0 TS 0 I ttyp0 0:00.12 sh
3482 root 0.0 44 44 0 19 0 TS 0 I + ttyp1 0:00.13 sh
3588 msw 0.0 44 44 0 19 0 TS 0 I + ttyp1 0:00.12 sh
8388 msw 0.0 44 44 0 19 0 TS 0 I + ttyp2 0:00.13 sh
8903 root 0.0 44 44 0 19 0 TS 0 I + ttyp2 0:00.18 sh
16911 root 0.1 44 44 0 19 0 TS 0 S + ttyp2 1:49.10 sh
22059 root 0.0 44 44 0 19 0 TS 0 S + ttyp2 0:00.01 sleep
764 msw 0.0 44 44 0 19 0 TS 0 I ttyp3 0:00.12 sh
846 root 0.0 44 44 0 19 0 TS 0 I ttyp3 0:00.20 sh
8105 root 0.0 44 44 0 19 0 TS 0 I ttyp3 0:01.51 make
8396 root 0.0 44 44 0 19 0 TS 0 S + ttyp3 0:00.13 tail
15927 root 0.0 44 44 0 19 0 TS 0 I ttyp3 0:00.03 sh
16132 root 14.2 44 44 0 19 0 TS 0 R ttyp3 2:48.67 sh
22259 root 0.0 44 44 0 19 0 TS 0 I ttyp3 0:01.06 bash
22637 root 0.0 0 0 -44 63 0 ?? 0 < ttyp3 0:00.00 <defunct>
total 68 -rwxr-xr-x 1 bin bin 31870 May 14 2000 MAKEDEV -rw-r--r-- 1 root system 1245 Aug 30 11:35 MAKEDEV.log -rwxr-xr-x 1 bin bin 1418 May 14 2000 SYSV_PTY cr-------- 1 root system 17, 0 Aug 30 10:39 audit srw-rw---- 1 root system 0 Sep 4 06:18 binlogdmb crw------- 1 root system 30, 0 Aug 30 10:39 cam lrwxrwxrwx 1 root system 4 Sep 2 08:16 cdrom -> rz4c crw--w--w- 1 root terminal 0, 0 Sep 4 13:46 console crw------- 1 root system 31, 0 Sep 5 12:48 kbinlog crw------- 1 root system 3, 1 Aug 30 10:39 kcon crw-rw---- 1 root system 25, 1 Aug 30 10:39 keyboard0 crw------- 1 root system 3, 0 Aug 30 10:39 klog cr--r----- 1 root mem 2, 1 Aug 30 10:39 kmem drwxr-xr-x 2 root system 8192 Aug 30 11:32 lat cr--r----- 1 root mem 45, 0 Aug 30 10:39 lockdev srw-rw-rw- 1 root system 0 Sep 4 06:18 log cr--r----- 1 root mem 2, 0 Aug 30 10:39 mem crw-rw---- 1 root system 23, 1 Aug 30 10:39 mouse0 crw-rw-rw- 1 root system 9,21511 Aug 30 11:35 nrmt0a crw-rw-rw- 1 root system 9,21507 Aug 30 11:35 nrmt0h crw-rw-rw- 1 root system 9,21505 Aug 30 11:35 nrmt0l crw-rw-rw- 1 root system 9,21509 Aug 30 11:35 nrmt0m crw-rw-rw- 1 root system 2, 2 Sep 5 12:54 null cr--r--r-- 1 root system 26, 0 Aug 30 10:39 pfcntr crw-rw-rw- 1 root system 32, 57 Aug 30 11:38 pipe crw------- 1 root system 37, 0 Aug 30 10:39 prf srwxrwxrwx 1 root system 0 Sep 4 06:18 printer crw-rw-rw- 2 root system 32, 7 Aug 30 10:39 ptm crw-rw-rw- 1 root system 32, 58 Aug 30 11:38 ptmx crw-rw-rw- 2 root system 32, 7 Aug 30 10:39 ptmx_bsd drwxr-xr-x 2 root system 8192 Aug 30 10:39 pts crw-rw-rw- 1 root system 7, 0 Aug 30 10:39 ptyp0 crw-rw-rw- 1 root system 7, 1 Aug 30 10:39 ptyp1 crw-rw-rw- 1 root system 7, 2 Aug 30 10:39 ptyp2 crw-rw-rw- 1 root system 7, 3 Aug 30 10:39 ptyp3 crw-rw-rw- 1 root system 7, 4 Aug 30 10:39 ptyp4 crw-rw-rw- 1 root system 7, 5 Aug 30 10:39 ptyp5 crw-rw-rw- 1 root system 7, 6 Aug 30 10:39 ptyp6 crw-rw-rw- 1 root system 7, 7 Aug 30 10:39 ptyp7 crw-rw-rw- 1 root system 7, 8 Aug 30 10:39 ptyp8 crw-rw-rw- 1 root system 7, 9 Aug 30 10:39 ptyp9 crw-rw-rw- 1 root system 7, 10 Aug 30 10:39 ptypa crw-rw-rw- 1 root system 7, 11 Aug 30 10:39 ptypb crw-rw-rw- 1 root system 7, 12 Aug 30 10:39 ptypc crw-rw-rw- 1 root system 7, 13 Aug 30 10:39 ptypd crw-rw-rw- 1 root system 7, 14 Aug 30 10:39 ptype crw-rw-rw- 1 root system 7, 15 Aug 30 10:39 ptypf crw-rw-rw- 1 root system 7, 16 Aug 30 10:39 ptyq0 crw-rw-rw- 1 root system 7, 17 Aug 30 10:39 ptyq1 crw-rw-rw- 1 root system 7, 18 Aug 30 10:39 ptyq2 crw-rw-rw- 1 root system 7, 19 Aug 30 10:39 ptyq3 crw-rw-rw- 1 root system 7, 20 Aug 30 10:39 ptyq4 crw-rw-rw- 1 root system 7, 21 Aug 30 10:39 ptyq5 crw-rw-rw- 1 root system 7, 22 Aug 30 10:39 ptyq6 crw-rw-rw- 1 root system 7, 23 Aug 30 10:39 ptyq7 crw-rw-rw- 1 root system 7, 24 Aug 30 10:39 ptyq8 crw-rw-rw- 1 root system 7, 25 Aug 30 10:39 ptyq9 crw-rw-rw- 1 root system 7, 26 Aug 30 10:39 ptyqa crw-rw-rw- 1 root system 7, 27 Aug 30 10:39 ptyqb crw-rw-rw- 1 root system 7, 28 Aug 30 10:39 ptyqc crw-rw-rw- 1 root system 7, 29 Aug 30 10:39 ptyqd crw-rw-rw- 1 root system 7, 30 Aug 30 10:39 ptyqe crw-rw-rw- 1 root system 7, 31 Aug 30 10:39 ptyqf crw-rw-rw- 1 root system 9,21510 Aug 30 11:35 rmt0a crw-rw-rw- 1 root system 9,21506 Aug 30 11:35 rmt0h crw-rw-rw- 1 root system 9,21504 Aug 30 11:35 rmt0l crw-rw-rw- 1 root system 9,21508 Aug 30 11:35 rmt0m crw------- 1 root system 8, 0 Aug 30 10:39 rrz0a crw------- 1 root system 8, 1 Aug 30 10:39 rrz0b crw------- 1 root system 8, 2 Aug 30 10:39 rrz0c crw------- 1 root system 8, 3 Aug 30 10:39 rrz0d crw------- 1 root system 8, 4 Aug 30 10:39 rrz0e crw------- 1 root system 8, 5 Aug 30 10:39 rrz0f crw------- 1 root system 8, 6 Aug 30 10:39 rrz0g crw------- 1 root system 8, 7 Aug 30 10:39 rrz0h crw------- 1 root system 8,19456 Sep 4 06:06 rrz11a crw------- 1 root system 8,19457 Sep 2 21:41 rrz11b crw------- 1 root system 8,19458 Sep 2 21:41 rrz11c crw------- 1 root system 8,19459 Sep 2 21:41 rrz11d crw------- 1 root system 8,19460 Sep 2 21:41 rrz11e crw------- 1 root system 8,19461 Sep 2 21:41 rrz11f crw------- 1 root system 8,19462 Sep 2 21:41 rrz11g crw------- 1 root system 8,19463 Sep 2 21:41 rrz11h crw------- 1 root system 8, 1024 Sep 2 20:57 rrz1a crw------- 1 root system 8, 1025 Sep 2 20:57 rrz1b crw------- 1 root system 8, 1026 Sep 2 20:57 rrz1c crw------- 1 root system 8, 1027 Sep 2 20:57 rrz1d crw------- 1 root system 8, 1028 Sep 2 20:57 rrz1e crw------- 1 root system 8, 1029 Sep 2 20:57 rrz1f crw------- 1 root system 8, 1030 Sep 2 20:57 rrz1g crw------- 1 root system 8, 1031 Sep 2 20:57 rrz1h crw------- 1 root system 8, 4096 Aug 30 11:34 rrz4a crw------- 1 root system 8, 4097 Aug 30 11:34 rrz4b crw------- 1 root system 8, 4098 Aug 30 11:34 rrz4c crw------- 1 root system 8, 4099 Aug 30 11:34 rrz4d crw------- 1 root system 8, 4100 Aug 30 11:35 rrz4e crw------- 1 root system 8, 4101 Aug 30 11:35 rrz4f crw------- 1 root system 8, 4102 Aug 30 11:35 rrz4g crw------- 1 root system 8, 4103 Aug 30 11:35 rrz4h brw------- 1 root system 8, 0 Aug 30 10:39 rz0a brw------- 1 root system 8, 1 Aug 30 10:39 rz0b brw------- 1 root system 8, 2 Aug 30 10:39 rz0c brw------- 1 root system 8, 3 Aug 30 10:39 rz0d brw------- 1 root system 8, 4 Aug 30 10:39 rz0e brw------- 1 root system 8, 5 Aug 30 10:39 rz0f brw------- 1 root system 8, 6 Aug 30 10:39 rz0g brw------- 1 root system 8, 7 Aug 30 10:39 rz0h brw------- 1 root system 8,19456 Sep 2 21:41 rz11a brw------- 1 root system 8,19457 Sep 2 21:41 rz11b brw------- 1 root system 8,19458 Sep 2 21:41 rz11c brw------- 1 root system 8,19459 Sep 2 21:41 rz11d brw------- 1 root system 8,19460 Sep 2 21:41 rz11e brw------- 1 root system 8,19461 Sep 2 21:41 rz11f brw------- 1 root system 8,19462 Sep 2 21:41 rz11g brw------- 1 root system 8,19463 Sep 2 21:41 rz11h brw------- 1 root system 8, 1024 Sep 2 20:57 rz1a brw------- 1 root system 8, 1025 Sep 2 20:57 rz1b brw------- 1 root system 8, 1026 Sep 2 20:57 rz1c brw------- 1 root system 8, 1027 Sep 2 20:57 rz1d brw------- 1 root system 8, 1028 Sep 2 20:57 rz1e brw------- 1 root system 8, 1029 Sep 2 20:57 rz1f brw------- 1 root system 8, 1030 Sep 2 20:57 rz1g brw------- 1 root system 8, 1031 Sep 2 20:57 rz1h brw------- 1 root system 8, 4096 Aug 30 11:34 rz4a brw------- 1 root system 8, 4097 Aug 30 11:34 rz4b brw------- 1 root system 8, 4098 Aug 30 11:34 rz4c brw------- 1 root system 8, 4099 Aug 30 11:34 rz4d brw------- 1 root system 8, 4100 Aug 30 11:35 rz4e brw------- 1 root system 8, 4101 Aug 30 11:35 rz4f brw------- 1 root system 8, 4102 Aug 30 11:35 rz4g brw------- 1 root system 8, 4103 Aug 30 11:35 rz4h drwxr-xr-x 2 root system 8192 Aug 30 11:38 sad crw-rw-rw- 2 root system 32, 49 Aug 30 10:39 snmpinfo drwxr-xr-x 3 root system 8192 Aug 30 11:38 streams crw-rw-rw- 1 root system 1, 0 Aug 30 10:39 tty crw-rw-rw- 1 root system 24, 2 Aug 30 11:35 tty00 crw-rw-rw- 1 root system 24, 3 Aug 30 11:35 tty01 crw--w---- 2 msw terminal 6, 0 Sep 5 12:30 ttyp0 crw--w---- 2 msw terminal 6, 1 Sep 5 02:18 ttyp1 crw--w---- 2 msw terminal 6, 2 Sep 5 12:54 ttyp2 crw--w---- 2 msw terminal 6, 3 Sep 5 12:54 ttyp3 crw--w---- 2 root terminal 6, 4 Sep 5 12:54 ttyp4 crw-rw-rw- 2 root system 6, 5 Aug 30 10:39 ttyp5 crw-rw-rw- 2 root system 6, 6 Aug 30 10:39 ttyp6 crw-rw-rw- 2 root system 6, 7 Aug 30 10:39 ttyp7 crw-rw-rw- 2 root system 6, 8 Aug 30 10:39 ttyp8 crw-rw-rw- 2 root system 6, 9 Aug 30 10:39 ttyp9 crw-rw-rw- 2 root system 6, 10 Aug 30 10:39 ttypa crw-rw-rw- 2 root system 6, 11 Aug 30 10:39 ttypb crw-rw-rw- 2 root system 6, 12 Aug 30 10:39 ttypc crw-rw-rw- 2 root system 6, 13 Aug 30 10:39 ttypd crw-rw-rw- 2 root system 6, 14 Aug 30 10:39 ttype crw-rw-rw- 2 root system 6, 15 Aug 30 10:39 ttypf crw-rw-rw- 2 root system 6, 16 Aug 30 10:39 ttyq0 crw-rw-rw- 2 root system 6, 17 Aug 30 10:39 ttyq1 crw-rw-rw- 2 root system 6, 18 Aug 30 10:39 ttyq2 crw-rw-rw- 2 root system 6, 19 Aug 30 10:39 ttyq3 crw-rw-rw- 2 root system 6, 20 Aug 30 10:39 ttyq4 crw-rw-rw- 2 root system 6, 21 Aug 30 10:39 ttyq5 crw-rw-rw- 2 root system 6, 22 Aug 30 10:39 ttyq6 crw-rw-rw- 2 root system 6, 23 Aug 30 10:39 ttyq7 crw-rw-rw- 2 root system 6, 24 Aug 30 10:39 ttyq8 crw-rw-rw- 2 root system 6, 25 Aug 30 10:39 ttyq9 crw-rw-rw- 2 root system 6, 26 Aug 30 10:39 ttyqa crw-rw-rw- 2 root system 6, 27 Aug 30 10:39 ttyqb crw-rw-rw- 2 root system 6, 28 Aug 30 10:39 ttyqc crw-rw-rw- 2 root system 6, 29 Aug 30 10:39 ttyqd crw-rw-rw- 2 root system 6, 30 Aug 30 10:39 ttyqe crw-rw-rw- 2 root system 6, 31 Aug 30 10:39 ttyqf crw-rw---- 1 root system 33, 1 Aug 30 10:39 ws0 crw-rw-rw- 1 root system 38, 0 Aug 30 10:39 zero /dev/lat: total 0 /dev/pts: total 0 crw--w---- 2 msw terminal 6, 0 Sep 5 12:30 0 crw--w---- 2 msw terminal 6, 1 Sep 5 02:18 1 crw-rw-rw- 2 root system 6, 10 Aug 30 10:39 10 crw-rw-rw- 2 root system 6, 11 Aug 30 10:39 11 crw-rw-rw- 2 root system 6, 12 Aug 30 10:39 12 crw-rw-rw- 2 root system 6, 13 Aug 30 10:39 13 crw-rw-rw- 2 root system 6, 14 Aug 30 10:39 14 crw-rw-rw- 2 root system 6, 15 Aug 30 10:39 15 crw-rw-rw- 2 root system 6, 16 Aug 30 10:39 16 crw-rw-rw- 2 root system 6, 17 Aug 30 10:39 17 crw-rw-rw- 2 root system 6, 18 Aug 30 10:39 18 crw-rw-rw- 2 root system 6, 19 Aug 30 10:39 19 crw--w---- 2 msw terminal 6, 2 Sep 5 12:54 2 crw-rw-rw- 2 root system 6, 20 Aug 30 10:39 20 crw-rw-rw- 2 root system 6, 21 Aug 30 10:39 21 crw-rw-rw- 2 root system 6, 22 Aug 30 10:39 22 crw-rw-rw- 2 root system 6, 23 Aug 30 10:39 23 crw-rw-rw- 2 root system 6, 24 Aug 30 10:39 24 crw-rw-rw- 2 root system 6, 25 Aug 30 10:39 25 crw-rw-rw- 2 root system 6, 26 Aug 30 10:39 26 crw-rw-rw- 2 root system 6, 27 Aug 30 10:39 27 crw-rw-rw- 2 root system 6, 28 Aug 30 10:39 28 crw-rw-rw- 2 root system 6, 29 Aug 30 10:39 29 crw--w---- 2 msw terminal 6, 3 Sep 5 12:54 3 crw-rw-rw- 2 root system 6, 30 Aug 30 10:39 30 crw-rw-rw- 2 root system 6, 31 Aug 30 10:39 31 crw--w---- 2 root terminal 6, 4 Sep 5 12:54 4 crw-rw-rw- 2 root system 6, 5 Aug 30 10:39 5 crw-rw-rw- 2 root system 6, 6 Aug 30 10:39 6 crw-rw-rw- 2 root system 6, 7 Aug 30 10:39 7 crw-rw-rw- 2 root system 6, 8 Aug 30 10:39 8 crw-rw-rw- 2 root system 6, 9 Aug 30 10:39 9 /dev/sad: total 0 crw-rw-rw- 1 root system 32, 56 Aug 30 11:38 admin /dev/streams: total 8 crw-rw-rw- 1 root system 32, 59 Aug 30 11:38 bba crw-rw---- 1 root system 32, 60 Aug 30 11:38 dlb crw-rw-rw- 1 root system 32, 55 Aug 30 11:38 echo crw-rw-rw- 2 root system 32, 49 Aug 30 10:39 kinfo crw-rw-rw- 1 root system 32, 5 Aug 30 11:38 lat crw-rw-rw- 1 root system 32, 53 Aug 30 11:38 log crw-rw-rw- 1 root system 32, 54 Aug 30 11:38 nuls crw-rw-rw- 1 root system 32, 57 Aug 30 11:38 pipe crw-rw-rw- 1 root system 32, 52 Aug 30 11:38 strkinfo drwxr-xr-x 2 root system 8192 Aug 30 11:38 xtiso /dev/streams/xtiso: total 0
total 68 -rwxr-xr-x 1 bin bin 31870 May 14 2000 MAKEDEV -rw-r--r-- 1 root system 1245 Aug 30 11:35 MAKEDEV.log -rwxr-xr-x 1 bin bin 1418 May 14 2000 SYSV_PTY cr-------- 1 root system 17, 0 Aug 30 10:39 audit srw-rw---- 1 root system 0 Sep 4 06:18 binlogdmb crw------- 1 root system 30, 0 Aug 30 10:39 cam brw------- 1 root system 8, 4098 Aug 30 11:34 cdrom crw--w--w- 1 root terminal 0, 0 Sep 4 13:46 console crw------- 1 root system 31, 0 Sep 5 12:48 kbinlog crw------- 1 root system 3, 1 Aug 30 10:39 kcon crw-rw---- 1 root system 25, 1 Aug 30 10:39 keyboard0 crw------- 1 root system 3, 0 Aug 30 10:39 klog cr--r----- 1 root mem 2, 1 Aug 30 10:39 kmem drwxr-xr-x 2 root system 8192 Aug 30 11:32 lat cr--r----- 1 root mem 45, 0 Aug 30 10:39 lockdev srw-rw-rw- 1 root system 0 Sep 4 06:18 log cr--r----- 1 root mem 2, 0 Aug 30 10:39 mem crw-rw---- 1 root system 23, 1 Aug 30 10:39 mouse0 crw-rw-rw- 1 root system 9,21511 Aug 30 11:35 nrmt0a crw-rw-rw- 1 root system 9,21507 Aug 30 11:35 nrmt0h crw-rw-rw- 1 root system 9,21505 Aug 30 11:35 nrmt0l crw-rw-rw- 1 root system 9,21509 Aug 30 11:35 nrmt0m crw-rw-rw- 1 root system 2, 2 Sep 5 12:54 null cr--r--r-- 1 root system 26, 0 Aug 30 10:39 pfcntr crw-rw-rw- 1 root system 32, 57 Aug 30 11:38 pipe crw------- 1 root system 37, 0 Aug 30 10:39 prf srwxrwxrwx 1 root system 0 Sep 4 06:18 printer crw-rw-rw- 2 root system 32, 7 Aug 30 10:39 ptm crw-rw-rw- 1 root system 32, 58 Aug 30 11:38 ptmx crw-rw-rw- 2 root system 32, 7 Aug 30 10:39 ptmx_bsd drwxr-xr-x 2 root system 8192 Aug 30 10:39 pts crw-rw-rw- 1 root system 7, 0 Aug 30 10:39 ptyp0 crw-rw-rw- 1 root system 7, 1 Aug 30 10:39 ptyp1 crw-rw-rw- 1 root system 7, 2 Aug 30 10:39 ptyp2 crw-rw-rw- 1 root system 7, 3 Aug 30 10:39 ptyp3 crw-rw-rw- 1 root system 7, 4 Aug 30 10:39 ptyp4 crw-rw-rw- 1 root system 7, 5 Aug 30 10:39 ptyp5 crw-rw-rw- 1 root system 7, 6 Aug 30 10:39 ptyp6 crw-rw-rw- 1 root system 7, 7 Aug 30 10:39 ptyp7 crw-rw-rw- 1 root system 7, 8 Aug 30 10:39 ptyp8 crw-rw-rw- 1 root system 7, 9 Aug 30 10:39 ptyp9 crw-rw-rw- 1 root system 7, 10 Aug 30 10:39 ptypa crw-rw-rw- 1 root system 7, 11 Aug 30 10:39 ptypb crw-rw-rw- 1 root system 7, 12 Aug 30 10:39 ptypc crw-rw-rw- 1 root system 7, 13 Aug 30 10:39 ptypd crw-rw-rw- 1 root system 7, 14 Aug 30 10:39 ptype crw-rw-rw- 1 root system 7, 15 Aug 30 10:39 ptypf crw-rw-rw- 1 root system 7, 16 Aug 30 10:39 ptyq0 crw-rw-rw- 1 root system 7, 17 Aug 30 10:39 ptyq1 crw-rw-rw- 1 root system 7, 18 Aug 30 10:39 ptyq2 crw-rw-rw- 1 root system 7, 19 Aug 30 10:39 ptyq3 crw-rw-rw- 1 root system 7, 20 Aug 30 10:39 ptyq4 crw-rw-rw- 1 root system 7, 21 Aug 30 10:39 ptyq5 crw-rw-rw- 1 root system 7, 22 Aug 30 10:39 ptyq6 crw-rw-rw- 1 root system 7, 23 Aug 30 10:39 ptyq7 crw-rw-rw- 1 root system 7, 24 Aug 30 10:39 ptyq8 crw-rw-rw- 1 root system 7, 25 Aug 30 10:39 ptyq9 crw-rw-rw- 1 root system 7, 26 Aug 30 10:39 ptyqa crw-rw-rw- 1 root system 7, 27 Aug 30 10:39 ptyqb crw-rw-rw- 1 root system 7, 28 Aug 30 10:39 ptyqc crw-rw-rw- 1 root system 7, 29 Aug 30 10:39 ptyqd crw-rw-rw- 1 root system 7, 30 Aug 30 10:39 ptyqe crw-rw-rw- 1 root system 7, 31 Aug 30 10:39 ptyqf crw-rw-rw- 1 root system 9,21510 Aug 30 11:35 rmt0a crw-rw-rw- 1 root system 9,21506 Aug 30 11:35 rmt0h crw-rw-rw- 1 root system 9,21504 Aug 30 11:35 rmt0l crw-rw-rw- 1 root system 9,21508 Aug 30 11:35 rmt0m crw------- 1 root system 8, 0 Aug 30 10:39 rrz0a crw------- 1 root system 8, 1 Aug 30 10:39 rrz0b crw------- 1 root system 8, 2 Aug 30 10:39 rrz0c crw------- 1 root system 8, 3 Aug 30 10:39 rrz0d crw------- 1 root system 8, 4 Aug 30 10:39 rrz0e crw------- 1 root system 8, 5 Aug 30 10:39 rrz0f crw------- 1 root system 8, 6 Aug 30 10:39 rrz0g crw------- 1 root system 8, 7 Aug 30 10:39 rrz0h crw------- 1 root system 8,19456 Sep 4 06:06 rrz11a crw------- 1 root system 8,19457 Sep 2 21:41 rrz11b crw------- 1 root system 8,19458 Sep 2 21:41 rrz11c crw------- 1 root system 8,19459 Sep 2 21:41 rrz11d crw------- 1 root system 8,19460 Sep 2 21:41 rrz11e crw------- 1 root system 8,19461 Sep 2 21:41 rrz11f crw------- 1 root system 8,19462 Sep 2 21:41 rrz11g crw------- 1 root system 8,19463 Sep 2 21:41 rrz11h crw------- 1 root system 8, 1024 Sep 2 20:57 rrz1a crw------- 1 root system 8, 1025 Sep 2 20:57 rrz1b crw------- 1 root system 8, 1026 Sep 2 20:57 rrz1c crw------- 1 root system 8, 1027 Sep 2 20:57 rrz1d crw------- 1 root system 8, 1028 Sep 2 20:57 rrz1e crw------- 1 root system 8, 1029 Sep 2 20:57 rrz1f crw------- 1 root system 8, 1030 Sep 2 20:57 rrz1g crw------- 1 root system 8, 1031 Sep 2 20:57 rrz1h crw------- 1 root system 8, 4096 Aug 30 11:34 rrz4a crw------- 1 root system 8, 4097 Aug 30 11:34 rrz4b crw------- 1 root system 8, 4098 Aug 30 11:34 rrz4c crw------- 1 root system 8, 4099 Aug 30 11:34 rrz4d crw------- 1 root system 8, 4100 Aug 30 11:35 rrz4e crw------- 1 root system 8, 4101 Aug 30 11:35 rrz4f crw------- 1 root system 8, 4102 Aug 30 11:35 rrz4g crw------- 1 root system 8, 4103 Aug 30 11:35 rrz4h brw------- 1 root system 8, 0 Aug 30 10:39 rz0a brw------- 1 root system 8, 1 Aug 30 10:39 rz0b brw------- 1 root system 8, 2 Aug 30 10:39 rz0c brw------- 1 root system 8, 3 Aug 30 10:39 rz0d brw------- 1 root system 8, 4 Aug 30 10:39 rz0e brw------- 1 root system 8, 5 Aug 30 10:39 rz0f brw------- 1 root system 8, 6 Aug 30 10:39 rz0g brw------- 1 root system 8, 7 Aug 30 10:39 rz0h brw------- 1 root system 8,19456 Sep 2 21:41 rz11a brw------- 1 root system 8,19457 Sep 2 21:41 rz11b brw------- 1 root system 8,19458 Sep 2 21:41 rz11c brw------- 1 root system 8,19459 Sep 2 21:41 rz11d brw------- 1 root system 8,19460 Sep 2 21:41 rz11e brw------- 1 root system 8,19461 Sep 2 21:41 rz11f brw------- 1 root system 8,19462 Sep 2 21:41 rz11g brw------- 1 root system 8,19463 Sep 2 21:41 rz11h brw------- 1 root system 8, 1024 Sep 2 20:57 rz1a brw------- 1 root system 8, 1025 Sep 2 20:57 rz1b brw------- 1 root system 8, 1026 Sep 2 20:57 rz1c brw------- 1 root system 8, 1027 Sep 2 20:57 rz1d brw------- 1 root system 8, 1028 Sep 2 20:57 rz1e brw------- 1 root system 8, 1029 Sep 2 20:57 rz1f brw------- 1 root system 8, 1030 Sep 2 20:57 rz1g brw------- 1 root system 8, 1031 Sep 2 20:57 rz1h brw------- 1 root system 8, 4096 Aug 30 11:34 rz4a brw------- 1 root system 8, 4097 Aug 30 11:34 rz4b brw------- 1 root system 8, 4098 Aug 30 11:34 rz4c brw------- 1 root system 8, 4099 Aug 30 11:34 rz4d brw------- 1 root system 8, 4100 Aug 30 11:35 rz4e brw------- 1 root system 8, 4101 Aug 30 11:35 rz4f brw------- 1 root system 8, 4102 Aug 30 11:35 rz4g brw------- 1 root system 8, 4103 Aug 30 11:35 rz4h drwxr-xr-x 2 root system 8192 Aug 30 11:38 sad crw-rw-rw- 2 root system 32, 49 Aug 30 10:39 snmpinfo drwxr-xr-x 3 root system 8192 Aug 30 11:38 streams crw-rw-rw- 1 root system 1, 0 Aug 30 10:39 tty crw-rw-rw- 1 root system 24, 2 Aug 30 11:35 tty00 crw-rw-rw- 1 root system 24, 3 Aug 30 11:35 tty01 crw--w---- 2 msw terminal 6, 0 Sep 5 12:30 ttyp0 crw--w---- 2 msw terminal 6, 1 Sep 5 02:18 ttyp1 crw--w---- 2 msw terminal 6, 2 Sep 5 12:54 ttyp2 crw--w---- 2 msw terminal 6, 3 Sep 5 12:54 ttyp3 crw--w---- 2 root terminal 6, 4 Sep 5 12:54 ttyp4 crw-rw-rw- 2 root system 6, 5 Aug 30 10:39 ttyp5 crw-rw-rw- 2 root system 6, 6 Aug 30 10:39 ttyp6 crw-rw-rw- 2 root system 6, 7 Aug 30 10:39 ttyp7 crw-rw-rw- 2 root system 6, 8 Aug 30 10:39 ttyp8 crw-rw-rw- 2 root system 6, 9 Aug 30 10:39 ttyp9 crw-rw-rw- 2 root system 6, 10 Aug 30 10:39 ttypa crw-rw-rw- 2 root system 6, 11 Aug 30 10:39 ttypb crw-rw-rw- 2 root system 6, 12 Aug 30 10:39 ttypc crw-rw-rw- 2 root system 6, 13 Aug 30 10:39 ttypd crw-rw-rw- 2 root system 6, 14 Aug 30 10:39 ttype crw-rw-rw- 2 root system 6, 15 Aug 30 10:39 ttypf crw-rw-rw- 2 root system 6, 16 Aug 30 10:39 ttyq0 crw-rw-rw- 2 root system 6, 17 Aug 30 10:39 ttyq1 crw-rw-rw- 2 root system 6, 18 Aug 30 10:39 ttyq2 crw-rw-rw- 2 root system 6, 19 Aug 30 10:39 ttyq3 crw-rw-rw- 2 root system 6, 20 Aug 30 10:39 ttyq4 crw-rw-rw- 2 root system 6, 21 Aug 30 10:39 ttyq5 crw-rw-rw- 2 root system 6, 22 Aug 30 10:39 ttyq6 crw-rw-rw- 2 root system 6, 23 Aug 30 10:39 ttyq7 crw-rw-rw- 2 root system 6, 24 Aug 30 10:39 ttyq8 crw-rw-rw- 2 root system 6, 25 Aug 30 10:39 ttyq9 crw-rw-rw- 2 root system 6, 26 Aug 30 10:39 ttyqa crw-rw-rw- 2 root system 6, 27 Aug 30 10:39 ttyqb crw-rw-rw- 2 root system 6, 28 Aug 30 10:39 ttyqc crw-rw-rw- 2 root system 6, 29 Aug 30 10:39 ttyqd crw-rw-rw- 2 root system 6, 30 Aug 30 10:39 ttyqe crw-rw-rw- 2 root system 6, 31 Aug 30 10:39 ttyqf crw-rw---- 1 root system 33, 1 Aug 30 10:39 ws0 crw-rw-rw- 1 root system 38, 0 Aug 30 10:39 zero /dev/lat: total 0 /dev/pts: total 0 crw--w---- 2 msw terminal 6, 0 Sep 5 12:30 0 crw--w---- 2 msw terminal 6, 1 Sep 5 02:18 1 crw-rw-rw- 2 root system 6, 10 Aug 30 10:39 10 crw-rw-rw- 2 root system 6, 11 Aug 30 10:39 11 crw-rw-rw- 2 root system 6, 12 Aug 30 10:39 12 crw-rw-rw- 2 root system 6, 13 Aug 30 10:39 13 crw-rw-rw- 2 root system 6, 14 Aug 30 10:39 14 crw-rw-rw- 2 root system 6, 15 Aug 30 10:39 15 crw-rw-rw- 2 root system 6, 16 Aug 30 10:39 16 crw-rw-rw- 2 root system 6, 17 Aug 30 10:39 17 crw-rw-rw- 2 root system 6, 18 Aug 30 10:39 18 crw-rw-rw- 2 root system 6, 19 Aug 30 10:39 19 crw--w---- 2 msw terminal 6, 2 Sep 5 12:54 2 crw-rw-rw- 2 root system 6, 20 Aug 30 10:39 20 crw-rw-rw- 2 root system 6, 21 Aug 30 10:39 21 crw-rw-rw- 2 root system 6, 22 Aug 30 10:39 22 crw-rw-rw- 2 root system 6, 23 Aug 30 10:39 23 crw-rw-rw- 2 root system 6, 24 Aug 30 10:39 24 crw-rw-rw- 2 root system 6, 25 Aug 30 10:39 25 crw-rw-rw- 2 root system 6, 26 Aug 30 10:39 26 crw-rw-rw- 2 root system 6, 27 Aug 30 10:39 27 crw-rw-rw- 2 root system 6, 28 Aug 30 10:39 28 crw-rw-rw- 2 root system 6, 29 Aug 30 10:39 29 crw--w---- 2 msw terminal 6, 3 Sep 5 12:54 3 crw-rw-rw- 2 root system 6, 30 Aug 30 10:39 30 crw-rw-rw- 2 root system 6, 31 Aug 30 10:39 31 crw--w---- 2 root terminal 6, 4 Sep 5 12:54 4 crw-rw-rw- 2 root system 6, 5 Aug 30 10:39 5 crw-rw-rw- 2 root system 6, 6 Aug 30 10:39 6 crw-rw-rw- 2 root system 6, 7 Aug 30 10:39 7 crw-rw-rw- 2 root system 6, 8 Aug 30 10:39 8 crw-rw-rw- 2 root system 6, 9 Aug 30 10:39 9 /dev/sad: total 0 crw-rw-rw- 1 root system 32, 56 Aug 30 11:38 admin /dev/streams: total 8 crw-rw-rw- 1 root system 32, 59 Aug 30 11:38 bba crw-rw---- 1 root system 32, 60 Aug 30 11:38 dlb crw-rw-rw- 1 root system 32, 55 Aug 30 11:38 echo crw-rw-rw- 2 root system 32, 49 Aug 30 10:39 kinfo crw-rw-rw- 1 root system 32, 5 Aug 30 11:38 lat crw-rw-rw- 1 root system 32, 53 Aug 30 11:38 log crw-rw-rw- 1 root system 32, 54 Aug 30 11:38 nuls crw-rw-rw- 1 root system 32, 57 Aug 30 11:38 pipe crw-rw-rw- 1 root system 32, 52 Aug 30 11:38 strkinfo drwxr-xr-x 2 root system 8192 Aug 30 11:38 xtiso /dev/streams/xtiso: total 0
The following products are registered with LMF on the system:
Product Status Users: Total Active OSF-DEV active unlimited CXXOSF active unlimited PHIGS-RUNTIME-USER active 1 0 OPEN3D active unlimited NET-APP-SUP-250 active unlimited OSF-BASE active unlimited OSF-USR active 4 1
Full display of LMF products:
Product Name: OSF-DEV
Producer: DEC
Issuer: DEC
Number of units: 0
Version:
Product Release Date: 7-OCT-1995
Key Termination Date:
Availability Table Code:
Activity Table Code: CONSTANT=100
Key Options:
Product Token:
Hardware-Id:
License status: active
Cancellation Date:
Revision Number: 0
Comment:
Cache Total Units: 100
Activity Charge: 0
Product Name: CXXOSF
Producer: DEC
Issuer: DEC
Number of units: 0
Version:
Product Release Date: 7-OCT-1995
Key Termination Date:
Availability Table Code:
Activity Table Code: CONSTANT=100
Key Options:
Product Token:
Hardware-Id:
License status: active
Cancellation Date:
Revision Number: 0
Comment:
Cache Total Units: 100
Activity Charge: 0
Product Name: PHIGS-RUNTIME-USER
Producer: DEC
Issuer: DEC
Number of units: 100
Version:
Product Release Date:
Key Termination Date:
Availability Table Code:
Activity Table Code: CONSTANT=100
Key Options:
Product Token:
Hardware-Id:
License status: active
Cancellation Date:
Revision Number: 0
Comment:
Cache Total Units: 100
Activity Charge: 100
Usable Units: 100
Product Name: OPEN3D
Producer: DEC
Issuer: DEC
Number of units: 1050
Version:
Product Release Date:
Key Termination Date:
Availability Table Code: H
Activity Table Code:
Key Options: MOD_UNITS, ALPHA
Product Token:
Hardware-Id:
License status: active
Cancellation Date:
Revision Number: 0
Comment:
Cache Total Units: 1050
Activity Charge: 0
Product Name: NET-APP-SUP-250
Producer: DEC
Issuer: DEC
Number of units: 1050
Version:
Product Release Date:
Key Termination Date:
Availability Table Code: H
Activity Table Code:
Key Options: MOD_UNITS, ALPHA
Product Token:
Hardware-Id:
License status: active
Cancellation Date:
Revision Number: 0
Comment:
Cache Total Units: 1050
Activity Charge: 0
Product Name: OSF-BASE
Producer: DEC
Issuer: DEC
Number of units: 20
Version:
Product Release Date:
Key Termination Date:
Availability Table Code: A
Activity Table Code:
Key Options: MOD_UNITS, ALPHA
Product Token:
Hardware-Id:
License status: active
Cancellation Date:
Revision Number: 0
Comment:
Cache Total Units: 20
Activity Charge: 0
Product Name: OSF-USR
Producer: DEC
Issuer: DEC
Number of units: 400
Version:
Product Release Date:
Key Termination Date:
Availability Table Code:
Activity Table Code: CONSTANT=100
Key Options:
Product Token:
Hardware-Id:
License status: active
Cancellation Date:
Revision Number: 0
Comment:
Cache Total Units: 400
Activity Charge: 100
Usable Units: 300
The following layered products are installed on the system (setld -i output):
Subset Status Description ------ ------ ----------- OSFACCT445 installed System Accounting Utilities (System Administration) OSFADVFS445 installed AdvFS Commands (System Administration) OSFADVFSBIN445 installed AdvFS Kernel Modules (Kernel Build Environment) OSFADVFSBINOBJECT445 AdvFS Kernel Objects (Kernel Software Development) OSFAFM445 installed Adobe Font Metric Files (Printing Environment) OSFATMBASE445 installed ATM Commands (Network-Server/Communications) OSFATMBIN445 installed ATM Kernel Modules (Kernel Build Environment) OSFATMBINCOM445 installed ATM Kernel Header and Common Files (Kernel Build Environment) OSFATMBINOBJECT445 ATM Kernel Objects (Kernel Software Development) OSFBASE445 installed Base System (- Required -) OSFBIN445 installed Standard Kernel Modules (Kernel Build Environment) OSFBINCOM445 installed Kernel Header and Common Files (Kernel Build Environment) OSFBINOBJECT445 Standard Kernel Objects (Kernel Software Development) OSFC2SEC445 installed C2-Security (System Administration) OSFCDAPGMR445 installed CDA(tm) Software Development (Software Development) OSFCDEAPPS445 installed CDE Additional Applications (Windows Applications) OSFCDEDEV445 installed CDE Software Development and Programming Examples(Software Development) OSFCDEDT445 installed CDE Desktop Environment (Windowing Environment) OSFCDEMAIL445 installed CDE Mail Interface (Mail Applications) OSFCDEMANOP445 installed Ref Pages: CDE Development (Reference Pages) OSFCDEMANOS445 installed Ref Pages: CDE Admin/User (Reference Pages) OSFCDEMIN445 installed CDE Minimum Runtime Environment (Windowing Environment) OSFCLINET445 installed Basic Networking Services (Network-Server/Communications) OSFCMPLRS445 installed Compiler Back End (Software Development) OSFCTABLOC445 installed Obsolete Locale databases (System Administration) OSFDCMT445 installed Doc. Preparation Tools (Text Processing) OSFDCMTEXT445 installed Doc. Preparation Tools Extensions (Text Processing) OSFDECW445 installed Additional DECwindows Applications (Windows Applications) OSFDMS445 installed Dataless Management Services (Network-Server/Communications) OSFDOSTOOLS445 installed DOS tools (General Applications) OSFEMACS445 installed GNU Emacs (General Applications) OSFENVMON445 installed Environmental Monitoring (System Administration) OSFEURLOC445 installed Single-Byte European Locales (System Administration) OSFEXAMPLES445 installed Programming Examples (Software Development) OSFEXER445 installed System Exercisers (System Administration) OSFFONT15445 installed DECwindows 100dpi Fonts (Windowing Environment) OSFFONT445 installed DECwindows 75dpi Fonts (Windowing Environment) OSFHWBASE445 installed Base System - Hardware Support (- Required -) OSFHWBIN445 installed Hardware Kernel Modules (Kernel Build Environment) OSFHWBINCOM445 installed Hardware Kernel Header and Common Files(Kernel Build Environment) OSFHWBINOBJECT445 Hardware Kernel Objects (Kernel Software Development) OSFIMXE445 installed Insight Manager (System Administration) OSFINCLUDE445 installed Standard Header Files (Software Development) OSFINET445 installed Additional Networking Services (Network-Server/Communications) OSFJAVA445 installed Java 1.1.7B-2 Environment (General Applications) OSFJAVADEV445 Java 1.1.7B-2 Development Environment(Software Development) OSFJAVADOC445 Java 1.1.7B-2 Online Documentation (Supplemental Documentation) OSFKBDLK201445 installed LK201 Keyboard Support (Windowing Environment) OSFKBDLK401445 installed LK401 Keyboard Support (Windowing Environment) OSFKBDLK411445 installed LK411 Keyboard Support (Windowing Environment) OSFKBDLK421445 installed LK421 Keyboard Support (Windowing Environment) OSFKBDLK444445 installed LK444 Keyboard Support (Windowing Environment) OSFKBDPCXAL445 installed PCXAL Keyboard Support (Windowing Environment) OSFKTOOLS445 installed Kernel Debugging Tools (System Administration) OSFLAT445 installed Local Area Transport (LAT) (General Applications) OSFLDBBASE445 installed Ladebug Debugger Version 4.0-58 (Software Development) OSFLDBDOC445 installed Ladebug Debugger Version 4.0-58 Release Notes(Software Development) OSFLDBSRV445 installed Ladebug Debugger remote server (Software Development) OSFLEARN445 installed Computer Aided System Tutor (General Applications) OSFLIBA445 installed Static Libraries (Software Development) OSFLSMBASE445 installed Logical Storage Manager (System Administration) OSFLSMBIN445 installed Logical Storage Manager Kernel Modules(Kernel Build Environment) OSFLSMBINCOM445 installed Logical Storage Manager Kernel Header and Common Files(Kernel Build Environment) OSFLSMBINOBJECT445 Logical Storage Manager Kernel Objects(Kernel Software Development) OSFLSMX11445 installed Logical Storage Manager GUI (System Administration) OSFLVM445 installed Logical Volume Manager (System Administration) OSFMANOP445 installed Ref Pages: Programming (Reference Pages) OSFMANOS445 installed Ref Pages: Admin/User (Reference Pages) OSFMANWOP445 installed Ref Pages: Windows Programming (Reference Pages) OSFMANWOS445 installed Ref Pages: Windows Admin/User (Reference Pages) OSFMH445 installed RAND Corp. Mail Handler (MH) (Mail Applications) OSFMITFONT445 installed X Fonts (Windowing Environment) OSFMOTIF11445 installed X/Motif 1.1 (Windowing Environment) OSFNETCONF445 installed Basic Networking Configuration Applications(System Administration) OSFNETSCAPE445 installed Netscape Communicator V4.7 (Windows Applications) OSFNFS445 installed NFS(tm) Utilities (Network-Server/Communications) OSFNFSCONF445 installed NFS(tm) Configuration Application (System Administration) OSFOBSOLETE445 installed Obsolete Commands and Utilities (System Administration) OSFOLDDECW445 installed Old Additional DECwindows Applications(Windows Applications) OSFOLDX11445 installed Old X Environment (Windowing Environment) OSFPGMR445 installed Standard Programmer Commands (Software Development) OSFPRINT445 installed Local Printer Support (Printing Environment) OSFRCS445 installed GNU Revision Control System (Software Development) OSFRIS445 installed Remote Installation Service (Network-Server/Communications) OSFSCCS445 installed Source Code Control System (Software Development) OSFSDE445 installed Software Development Tools and Utilities(Software Development) OSFSDECDE445 installed Software Development Desktop Environment(Software Development) OSFSER3D445 installed X Servers for Open3D (Windowing Environment) OSFSER445 installed X Servers Base (Windowing Environment) OSFSERPC445 installed X Servers for PCbus (Windowing Environment) OSFSERTC445 installed X Servers for TurboChannel (Windowing Environment) OSFSERVICETOOLS445 installed Service Tools (System Administration) OSFSVID2445 installed UNIX(tm) SVID2 Compatibility (General Applications) OSFSYSMAN445 installed Base System Management Applications and Utilities(System Administration) OSFTCLBASE445 installed Tcl Commands (General Applications) OSFTERM445 installed Additional Terminfo databases (General Applications) OSFTKBASE445 installed Tk Toolkit Commands (General Applications) OSFUUCP445 installed UNIX(tm) to UNIX(tm) Copy Facility (General Applications) OSFX11445 installed Basic X Environment (Windowing Environment) OSFXADMIN445 installed Graphical System Administration Utilities(System Administration) OSFXC2SEC445 installed C2-Security GUI (System Administration) OSFXCDADEV445 installed CDA(tm) for X/Motif Development (Software Development) OSFXDEMOS445 installed Demo X Applications (Windows Applications) OSFXDEV445 installed X Window and X/Motif Software Development(Software Development) OSFXEXAMPLES445 installed X Window and X/Motif Programming Examples(Software Development) OSFXIEDOC445 installed XIE Version 5 Online Documentation (Supplemental Documentation) OSFXINCLUDE445 installed X Window and X/Motif Header Files (Software Development) OSFXLIBA445 installed X Window and X/Motif Static Libraries(Software Development) OSFXMIT445 installed Additional X Applications (Windows Applications) OSFXNEST445 installed Nested X Server (Windows Applications) OSFXOEM445 installed X Customizations for OEM (Windowing Environment) OSFXPRINT445 installed Graphical Print Configuration Application(System Administration) OSFXSYSMAN445 installed Graphical Base System Management Utilities(System Administration) OSFXVFB445 installed Virtual X Frame Buffer (Windows Applications)
TruCluster Available/Production Server is not being used on the system.
Print queue status (lpc status output):
The /etc/lpsodb file is not available.
The /etc/printcap file is not available.
APX printing was not found.
The cron daemon runs shell commands at specified dates and times. Commands that must run according to a regular or periodic schedule are found in the crontab files.
The following users' crontab files contain important system tasks:
15 4 * * * find /var/preserve -mount -mtime +7 -type f -exec rm -f {} \;
20 4 * * * find /tmp -mount -type f -atime +2 -exec rm -f {} \;
30 4 * * * find /var/tmp -mount -type f -atime +7 -exec rm -f {} \;
40 4 * * * find /var/adm/syslog.dated -depth -type d -ctime +5 -exec rm -rf {} \;
The /var/adm/cron/cron.allow file is not available.
The cron.deny file lists denied users.
The /var/adm/cron/at.allow file is not available.
The at.deny file lists denied users.
XLOGIN: cde
Type of graphics (sizer -gt):
PMAGD
Determining if the Xserver is running (ps | grep X11):
root 579 574 0.0 Sep 04 ?? 0:02.36 /usr/bin/X11/X :0 -auth /var/dt/authdir/authfiles/A:0-aaarEa
Contents of /usr/lib/X11/Xserver.conf file:
! Default configuration file for extensible X server
! no other sysyem files are needed
! no other core files are needed
!
! device <
! >
! You can set alternate library search paths here or supplement the
! default path.
! library_path < /newserver/fonts/lib/font:/usr/shlib >
! Add a few more extensions
extensions <
< extdpms libextdpms.so DPMSExtensionInit DPMS >
< dbe libdbe.so DbeExtensionInit DOUBLE-BUFFER >
< extshape libextshape.so ShapeExtensionInit SHAPE >
< extMultibuf libextMultibuf.so MultibufferExtensionInit Multi-Buffering >
! The KME extension is obsolete functionality that supports lock down
! and latching modifiers. It has been replaced by the XKB extension
! and is only provided here for interoperability with R5 servers.
< extkme libextkme.so KMEInit Keyboard-Management-Extension >
< extMITMisc libextMITMisc.so MITMiscExtensionInit MIT-SUNDRY-NONSTANDARD >
< extScrnSvr libextScrnSvr.so ScreenSaverExtensionInit MIT-SCREEN-SAVER >
< extSync libextSync.so SyncExtensionInit SYNC >
< extxtest libextxtest.so XTestExtensionInit XTEST >
< extbigreq libextbigreq.so BigReqExtensionInit BIG-REQUESTS >
< extXCMisc libextXCMisc.so XCMiscExtensionInit XC-MISC >
! add the xtrap extension
< extxtrap libextxtrap.so DEC_XTRAPInit DEC-XTRAP >
! add the video extension along with device specific handlers
! for the TX device
< xv libxv.so XvExtensionInit XVideo
< _dec_xv_tx lib_dec_xv_tx.so XvropScreenInit PMAG-RO >
< _dec_xv_tx lib_dec_xv_tx.so XvropScreenInit PMAG-JA >
>
! add the X imaging extension
!not R6 < _dec_xie lib_dec_xie.so Xie3Init Xie >
< dixie libdixie.so XieInit XIE
< mixie libmixie.so >
>
! < _adobe_dps lib_adobe_dps.so XDPSExtensionDeferredInit Adobe-DPS-Extension >
! < _adobe_dps lib_adobe_dps.so XDPSExtensionDeferredInit DPSExtension >
>
! Load Speedo and Type1 renderers and
! enable communication with a font server
font_renderers <
< fr_fs libfr_fs.so fs_register_fpe_functions >
< fr_Speedo libfr_Speedo.so SpeedoRegisterFontFileFunctions >
< fr_Type1 libfr_Type1.so Type1RegisterFontFileFunctions >
>
! Enable X Input Devices
!input <
! Dial and Button Box on port /dev/tty01
! < _dec_xi_pcm lib_dec_xi_pcm.so XiPcmInit /dev/tty01 >
!
! Serial Mouse. Use the following format for the last parameter:
!
! device:type:baud:emulate3:chordmid:samplerate:cleardtr:clearrts:core
!
! where
!
! device: The port the device is connectd to.
! For example, /dev/tty00. /dev/tty00 is the
! default.
!
! type: The mouse type. It must be one of the following
! strings (case does not matter): microsoft
! mousesystems mmseries logitech busmouse mouseman
! ps/2 mmhittab. mousesystems is the default.
!
! baud: The baud rate of the mouse. Mine is 1200, I think
! others will do 9600. 1200 is the default.
!
! emulate3: Either 0 or 1. 1 means emulate a 3 button mouse
! with a 2 button mouse. This is not implemented yet,
! though 0 is the default.
!
! chordmid: Either 0 or 1. Some 3 button mice treat MB2 kind of
! whacky. A value of 1 supports those meesers. 0 is
! the default.
!
! samplerate: The sample rate of the mouse. I don't have a mouse
! that supports this, so I don't know what it does.
! 150 is the default.
!
! cleardtr: Either 0 or 1. 1 means clear the DTR signal for
! the port before using the mouse. 0 is the default.
!
! clearrts: Either 0 or 1. 1 means clear the RTS signal for
! the port before using the mouse. 0 is the default.
!
! core: Either 0 or 1. 1 means make this emulate the core
! device. 0 means make it a two relative motion
! valuator, n-button X Input Device. 0 isn't
! implemented yet. 1 is the default.
!
! < _dec_xi_serial_mouse lib_dec_xi_serial_mouse.so XiSerialMouseInit /dev/tty00:microsoft:1200:1 >
! CalComp Tablet entry
! < _dec_xi_db3 lib_dec_xi_db3.so XiDb3Init /dev/tty00:1:12:12:16:1:8:1000:1:1 >
!>
! transport and auth_protocol library loading is not yet supported
! you specify command line arguments here
args <
-pn
>
CDE is running on this system.
Last 500 lines of the /var/dt/Xerrors file:
Screen 0 PMAGD revision # 3 32 bits/pixel 8388608 bytes VRAM
Stripped contents of the /usr/dt/config/Xserversfile:
:0 Local local@console /usr/bin/X11/X :0
Accounting is disabled in rc.config .
Accounting rc.config settings:
ACCOUNTING:
Note: Check the crontab entries for accounting commands in the crontab adm file.The Adhoc directory ( /var/adhoc ) does not exist; no files were included.
EVM not available on system
The syslog.conf file contains entries that specify the facility (the part of the system that generated the error), the error message severity level, and the destination to which the syslogd daemon sends the messages.
kern.debug /var/adm/syslog.dated/kern.log user.debug /var/adm/syslog.dated/user.log mail.debug /var/adm/syslog.dated/mail.log daemon.debug /var/adm/syslog.dated/daemon.log auth.debug /var/adm/syslog.dated/auth.log syslog.debug /var/adm/syslog.dated/syslog.log lpr.debug /var/adm/syslog.dated/lpr.log msgbuf.err /var/adm/crash/msgbuf.savecore kern.debug /var/adm/messages kern.debug /dev/console *.emerg *
ls -l of the current directory:
total 24 -rw-r----- 1 root adm 238 Sep 5 11:38 auth.log -rw-r----- 1 root adm 2539 Sep 5 12:18 daemon.log -rw-r----- 1 root adm 0 Sep 5 06:18 kern.log -rw-r----- 1 root adm 0 Sep 5 06:18 lpr.log -rw-r----- 1 root adm 0 Sep 5 06:18 mail.log -rw-r----- 1 root adm 39 Sep 5 06:18 syslog.log -rw-r----- 1 root adm 0 Sep 5 06:18 user.log
Sep 5 07:18:24 node3 named[299]: USAGE 1188973104 1188883102 CPU=0.041968u/0.081984s CHILDCPU=0u/0s Sep 5 07:18:24 node3 named[299]: NSTATS 1188973104 1188883102 A=3 PTR=1 Sep 5 07:18:24 node3 named[299]: XSTATS 1188973104 1188883102 RR=6 RNXD=1 RFwdR=5 RDupR=0 RFail=0 RFErr=0 RErr=0 RAXFR=0 RLame=0 ROpts=0 SSysQ=1 SAns=1 SFwdQ=3 SDupQ=0 SErr=0 RQ=4 RIQ=0 RFwdQ=3 RDupQ=0 RTCP=0 SFwdR=5 SFail=0 SFErr=0 SNaAns=1 SNXD=0 Sep 5 08:18:24 node3 named[299]: USAGE 1188976704 1188883102 CPU=0.042944u/0.084912s CHILDCPU=0u/0s Sep 5 08:18:24 node3 named[299]: NSTATS 1188976704 1188883102 A=3 PTR=1 Sep 5 08:18:24 node3 named[299]: XSTATS 1188976704 1188883102 RR=6 RNXD=1 RFwdR=5 RDupR=0 RFail=0 RFErr=0 RErr=0 RAXFR=0 RLame=0 ROpts=0 SSysQ=1 SAns=1 SFwdQ=3 SDupQ=0 SErr=0 RQ=4 RIQ=0 RFwdQ=3 RDupQ=0 RTCP=0 SFwdR=5 SFail=0 SFErr=0 SNaAns=1 SNXD=0 Sep 5 09:18:24 node3 named[299]: USAGE 1188980304 1188883102 CPU=0.045872u/0.085888s CHILDCPU=0u/0s Sep 5 09:18:24 node3 named[299]: NSTATS 1188980304 1188883102 A=3 PTR=1 Sep 5 09:18:24 node3 named[299]: XSTATS 1188980304 1188883102 RR=6 RNXD=1 RFwdR=5 RDupR=0 RFail=0 RFErr=0 RErr=0 RAXFR=0 RLame=0 ROpts=0 SSysQ=1 SAns=1 SFwdQ=3 SDupQ=0 SErr=0 RQ=4 RIQ=0 RFwdQ=3 RDupQ=0 RTCP=0 SFwdR=5 SFail=0 SFErr=0 SNaAns=1 SNXD=0 Sep 5 10:18:24 node3 named[299]: USAGE 1188983904 1188883102 CPU=0.046848u/0.08784s CHILDCPU=0u/0s Sep 5 10:18:24 node3 named[299]: NSTATS 1188983904 1188883102 A=3 PTR=1 Sep 5 10:18:24 node3 named[299]: XSTATS 1188983904 1188883102 RR=6 RNXD=1 RFwdR=5 RDupR=0 RFail=0 RFErr=0 RErr=0 RAXFR=0 RLame=0 ROpts=0 SSysQ=1 SAns=1 SFwdQ=3 SDupQ=0 SErr=0 RQ=4 RIQ=0 RFwdQ=3 RDupQ=0 RTCP=0 SFwdR=5 SFail=0 SFErr=0 SNaAns=1 SNXD=0 Sep 5 11:18:24 node3 named[299]: USAGE 1188987504 1188883102 CPU=0.0488u/0.09272s CHILDCPU=0u/0s Sep 5 11:18:24 node3 named[299]: NSTATS 1188987504 1188883102 A=3 PTR=1 Sep 5 11:18:24 node3 named[299]: XSTATS 1188987504 1188883102 RR=6 RNXD=1 RFwdR=5 RDupR=0 RFail=0 RFErr=0 RErr=0 RAXFR=0 RLame=0 ROpts=0 SSysQ=1 SAns=1 SFwdQ=3 SDupQ=0 SErr=0 RQ=4 RIQ=0 RFwdQ=3 RDupQ=0 RTCP=0 SFwdR=5 SFail=0 SFErr=0 SNaAns=1 SNXD=0 Sep 5 12:18:24 node3 named[299]: USAGE 1188991104 1188883102 CPU=0.052704u/0.10248s CHILDCPU=0u/0s Sep 5 12:18:24 node3 named[299]: NSTATS 1188991104 1188883102 A=5 PTR=1 Sep 5 12:18:24 node3 named[299]: XSTATS 1188991104 1188883102 RR=9 RNXD=1 RFwdR=8 RDupR=0 RFail=0 RFErr=0 RErr=0 RAXFR=0 RLame=0 ROpts=0 SSysQ=1 SAns=1 SFwdQ=5 SDupQ=0 SErr=0 RQ=6 RIQ=0 RFwdQ=5 RDupQ=0 RTCP=0 SFwdR=8 SFail=0 SFErr=0 SNaAns=1 SNXD=0
Sep 5 07:10:35 node3 su: SU msw on /dev/ttyp0 Sep 5 07:22:23 node3 su: BADSU msw on /dev/ttyp3 Sep 5 07:22:26 node3 su: SU msw on /dev/ttyp3 Sep 5 10:45:49 node3 su: SU msw on /dev/ttyp0 Sep 5 11:38:18 node3 su: SU msw on /dev/ttyp3
Sep 5 06:18:37 node3 syslogd: restart
Aug 30 11:38:37 done3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Aug 30 11:38:37 done3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Aug 30 11:38:37 done3 vmunix: physical memory = 128.00 megabytes. Aug 30 11:38:37 done3 vmunix: available memory = 118.80 megabytes. Aug 30 11:38:37 done3 vmunix: using 483 buffers containing 3.77 megabytes of memory Aug 30 11:38:37 done3 vmunix: tc0 at nexus Aug 30 11:38:37 done3 vmunix: scc0 at tc0 slot 7 Aug 30 11:38:37 done3 vmunix: tcds0 at tc0 slot 6 Aug 30 11:38:37 done3 vmunix: scsi0 at tcds0 slot 0 Aug 30 11:38:37 done3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Aug 30 11:38:37 done3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=1) (PLEXTOR CD-ROM PX-40TS 1.12) Aug 30 11:38:37 done3 vmunix: scsi1 at tcds0 slot 1 Aug 30 11:38:37 done3 vmunix: tz13 at scsi1 target 5 lun 0 (LID=2) (DEC TLZ06 (C)DEC 0491) Aug 30 11:38:37 done3 vmunix: bba0 at tc0 slot 7 Aug 30 11:38:37 done3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Aug 30 11:38:37 done3 vmunix: ln0 at tc0 slot 7 Aug 30 11:38:37 done3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Aug 30 11:38:37 done3 vmunix: fb0 at tc0 slot 0 Aug 30 11:38:37 done3 vmunix: 1280X1024 Aug 30 11:38:37 done3 vmunix: DEC 3000 - M600 system Aug 30 11:38:37 done3 vmunix: Firmware revision: 7.0 Aug 30 11:38:37 done3 vmunix: PALcode: UNIX version 1.45 Aug 30 11:38:37 done3 vmunix: dli: configured Aug 30 11:38:37 done3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Aug 30 11:38:46 done3 vmunix: Environmental Monitoring Subsystem Configured. Aug 30 11:38:51 done3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Aug 30 20:30:43 done3 vmunix: Can't find an OSF-BASE, UNIX-WORKSTATION, or UNIX-SERVER license PAK Aug 30 20:40:21 done3 vmunix: Can't find an OSF-BASE, UNIX-WORKSTATION, or UNIX-SERVER license PAK Aug 30 21:21:21 node3 vmunix: Can't find an OSF-BASE, UNIX-WORKSTATION, or UNIX-SERVER license PAK Sep 1 21:07:50 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 1 21:07:50 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 1 21:07:50 node3 vmunix: physical memory = 128.00 megabytes. Sep 1 21:07:50 node3 vmunix: available memory = 118.80 megabytes. Sep 1 21:07:50 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 1 21:07:50 node3 vmunix: tc0 at nexus Sep 1 21:07:50 node3 vmunix: scc0 at tc0 slot 7 Sep 1 21:07:50 node3 vmunix: tcds0 at tc0 slot 6 Sep 1 21:07:50 node3 vmunix: scsi0 at tcds0 slot 0 Sep 1 21:07:50 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 1 21:07:50 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=1) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 1 21:07:50 node3 vmunix: scsi1 at tcds0 slot 1 Sep 1 21:07:50 node3 vmunix: bba0 at tc0 slot 7 Sep 1 21:07:50 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 1 21:07:50 node3 vmunix: ln0 at tc0 slot 7 Sep 1 21:07:50 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 1 21:07:50 node3 vmunix: fb0 at tc0 slot 0 Sep 1 21:07:50 node3 vmunix: 1280X1024 Sep 1 21:07:50 node3 vmunix: DEC 3000 - M600 system Sep 1 21:07:50 node3 vmunix: Firmware revision: 7.0 Sep 1 21:07:50 node3 vmunix: PALcode: UNIX version 1.45 Sep 1 21:07:50 node3 vmunix: dli: configured Sep 1 21:07:50 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 1 21:08:02 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 1 21:08:07 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Sep 2 07:47:59 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 2 07:47:59 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 2 07:47:59 node3 vmunix: physical memory = 128.00 megabytes. Sep 2 07:47:59 node3 vmunix: available memory = 118.80 megabytes. Sep 2 07:48:00 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 2 07:48:00 node3 vmunix: tc0 at nexus Sep 2 07:48:00 node3 vmunix: scc0 at tc0 slot 7 Sep 2 07:48:00 node3 vmunix: tcds0 at tc0 slot 6 Sep 2 07:48:00 node3 vmunix: scsi0 at tcds0 slot 0 Sep 2 07:48:00 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 2 07:48:00 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=1) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 2 07:48:00 node3 vmunix: scsi1 at tcds0 slot 1 Sep 2 07:48:00 node3 vmunix: bba0 at tc0 slot 7 Sep 2 07:48:00 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 2 07:48:00 node3 vmunix: ln0 at tc0 slot 7 Sep 2 07:48:00 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 2 07:48:00 node3 vmunix: fb0 at tc0 slot 0 Sep 2 07:48:00 node3 vmunix: 1280X1024 Sep 2 07:48:00 node3 vmunix: DEC 3000 - M600 system Sep 2 07:48:00 node3 vmunix: Firmware revision: 7.0 Sep 2 07:48:00 node3 vmunix: PALcode: UNIX version 1.45 Sep 2 07:48:00 node3 vmunix: dli: configured Sep 2 07:48:00 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 2 07:48:11 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 2 07:48:16 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Sep 2 08:01:19 node3 vmunix: Can't find an OSF-BASE, UNIX-WORKSTATION, or UNIX-SERVER license PAK Sep 2 08:16:44 node3 vmunix: SCSI logical disk 1: using ULTRIX partition info found on disk. Sep 2 08:16:52 node3 last message repeated 4 times Sep 2 08:17:42 node3 vmunix: SCSI logical disk 1: using ULTRIX partition info found on disk. Sep 2 08:17:42 node3 vmunix: cdfs_mount: Unsupported disk format Sep 2 08:19:20 node3 vmunix: SCSI logical disk 1: using ULTRIX partition info found on disk. Sep 2 08:19:20 node3 vmunix: SCSI logical disk 1: using ULTRIX partition info found on disk. Sep 2 20:57:51 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 2 20:57:51 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 2 20:57:51 node3 vmunix: physical memory = 128.00 megabytes. Sep 2 20:57:51 node3 vmunix: available memory = 118.80 megabytes. Sep 2 20:57:51 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 2 20:57:51 node3 vmunix: tc0 at nexus Sep 2 20:57:51 node3 vmunix: scc0 at tc0 slot 7 Sep 2 20:57:51 node3 vmunix: tcds0 at tc0 slot 6 Sep 2 20:57:51 node3 vmunix: scsi0 at tcds0 slot 0 Sep 2 20:57:51 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 2 20:57:51 node3 vmunix: rz1 at scsi0 target 1 lun 0 (LID=1) (QUANTUM ATLAS10K3_18_SCA 020W) (Wide16) Sep 2 20:57:51 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=2) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 2 20:57:51 node3 vmunix: scsi1 at tcds0 slot 1 Sep 2 20:57:51 node3 vmunix: bba0 at tc0 slot 7 Sep 2 20:57:51 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 2 20:57:51 node3 vmunix: ln0 at tc0 slot 7 Sep 2 20:57:51 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 2 20:57:51 node3 vmunix: fb0 at tc0 slot 0 Sep 2 20:57:51 node3 vmunix: 1280X1024 Sep 2 20:57:51 node3 vmunix: DEC 3000 - M600 system Sep 2 20:57:51 node3 vmunix: Firmware revision: 7.0 Sep 2 20:57:51 node3 vmunix: PALcode: UNIX version 1.45 Sep 2 20:57:51 node3 vmunix: dli: configured Sep 2 20:57:51 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 2 20:58:03 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 2 20:58:08 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Sep 2 20:58:08 node3 vmunix: SCSI logical disk 2: using ULTRIX partition info found on disk. Sep 2 21:31:49 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 2 21:31:49 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 2 21:31:49 node3 vmunix: physical memory = 128.00 megabytes. Sep 2 21:31:49 node3 vmunix: available memory = 118.80 megabytes. Sep 2 21:31:49 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 2 21:31:49 node3 vmunix: tc0 at nexus Sep 2 21:31:49 node3 vmunix: scc0 at tc0 slot 7 Sep 2 21:31:49 node3 vmunix: tcds0 at tc0 slot 6 Sep 2 21:31:49 node3 vmunix: scsi0 at tcds0 slot 0 Sep 2 21:31:49 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 2 21:31:49 node3 vmunix: rz1 at scsi0 target 1 lun 0 (LID=1) (IBM DXHS18Y 0430) Sep 2 21:31:49 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=2) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 2 21:31:49 node3 vmunix: scsi1 at tcds0 slot 1 Sep 2 21:31:49 node3 vmunix: tz13 at scsi1 target 5 lun 0 (LID=3) (DEC TLZ06 (C)DEC 0491) Sep 2 21:31:49 node3 vmunix: bba0 at tc0 slot 7 Sep 2 21:31:49 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 2 21:31:49 node3 vmunix: ln0 at tc0 slot 7 Sep 2 21:31:49 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 2 21:31:49 node3 vmunix: fb0 at tc0 slot 0 Sep 2 21:31:49 node3 vmunix: 1280X1024 Sep 2 21:31:49 node3 vmunix: DEC 3000 - M600 system Sep 2 21:31:49 node3 vmunix: Firmware revision: 7.0 Sep 2 21:31:49 node3 vmunix: PALcode: UNIX version 1.45 Sep 2 21:31:49 node3 vmunix: dli: configured Sep 2 21:31:49 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 2 21:32:01 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 2 21:32:06 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Sep 2 21:32:06 node3 vmunix: ln0: lost carrier: check connector Sep 2 21:32:06 node3 vmunix: ln0: lost carrier: check connector Sep 2 21:34:09 node3 last message repeated 5 times Sep 2 21:40:54 node3 last message repeated 18 times Sep 2 21:41:52 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 2 21:41:52 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 2 21:41:52 node3 vmunix: physical memory = 128.00 megabytes. Sep 2 21:41:52 node3 vmunix: available memory = 118.80 megabytes. Sep 2 21:41:52 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 2 21:41:52 node3 vmunix: tc0 at nexus Sep 2 21:41:52 node3 vmunix: scc0 at tc0 slot 7 Sep 2 21:41:52 node3 vmunix: tcds0 at tc0 slot 6 Sep 2 21:41:52 node3 vmunix: scsi0 at tcds0 slot 0 Sep 2 21:41:52 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 2 21:41:52 node3 vmunix: rz1 at scsi0 target 1 lun 0 (LID=1) (QUANTUM ATLAS10K3_18_SCA 020W) (Wide16) Sep 2 21:41:52 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=2) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 2 21:41:52 node3 vmunix: scsi1 at tcds0 slot 1 Sep 2 21:41:52 node3 vmunix: rz10 at scsi1 target 2 lun 0 (LID=3) (DEC RRD43 (C) DEC 1084) Sep 2 21:41:52 node3 vmunix: rz11 at scsi1 target 3 lun 0 (LID=4) (IBM DXHS18Y 0430) Sep 2 21:41:52 node3 vmunix: tz13 at scsi1 target 5 lun 0 (LID=5) () Sep 2 21:41:52 node3 vmunix: bba0 at tc0 slot 7 Sep 2 21:41:52 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 2 21:41:52 node3 vmunix: ln0 at tc0 slot 7 Sep 2 21:41:52 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 2 21:41:52 node3 vmunix: fb0 at tc0 slot 0 Sep 2 21:41:52 node3 vmunix: 1280X1024 Sep 2 21:41:52 node3 vmunix: DEC 3000 - M600 system Sep 2 21:41:52 node3 vmunix: Firmware revision: 7.0 Sep 2 21:41:52 node3 vmunix: PALcode: UNIX version 1.45 Sep 2 21:41:52 node3 vmunix: dli: configured Sep 2 21:41:52 node3 vmunix: cam_logger: CAM_ERROR packet Sep 2 21:41:52 node3 vmunix: cam_logger: bus 1 target 5 lun 0 Sep 2 21:41:52 node3 vmunix: ss_device_reset_done Sep 2 21:41:52 node3 vmunix: Bus device reset has been performed Sep 2 21:41:52 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 2 21:41:52 node3 vmunix: Sep 2 21:41:52 node3 vmunix: Sep 2 21:41:52 node3 vmunix: WARNING: preposterous time in TOY clock -- CHECK AND RESET THE DATE!! Sep 2 21:41:52 node3 vmunix: Sep 2 21:41:52 node3 vmunix: ln0: lost carrier: check connector Sep 2 21:42:03 node3 last message repeated 5 times Sep 2 21:42:04 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 2 21:42:07 node3 vmunix: ln0: lost carrier: check connector Sep 2 21:42:09 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Sep 2 21:42:09 node3 vmunix: ln0: lost carrier: check connector Sep 2 21:42:31 node3 last message repeated 3 times Sep 2 21:44:12 node3 last message repeated 4 times Sep 2 21:45:06 node3 vmunix: ln0: lost carrier: check connector Sep 3 08:26:02 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 3 08:26:02 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 3 08:26:02 node3 vmunix: physical memory = 128.00 megabytes. Sep 3 08:26:02 node3 vmunix: available memory = 118.80 megabytes. Sep 3 08:26:02 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 3 08:26:02 node3 vmunix: tc0 at nexus Sep 3 08:26:02 node3 vmunix: scc0 at tc0 slot 7 Sep 3 08:26:02 node3 vmunix: tcds0 at tc0 slot 6 Sep 3 08:26:02 node3 vmunix: scsi0 at tcds0 slot 0 Sep 3 08:26:02 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 3 08:26:02 node3 vmunix: rz1 at scsi0 target 1 lun 0 (LID=1) (QUANTUM ATLAS10K3_18_SCA 020W) (Wide16) Sep 3 08:26:02 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=2) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 3 08:26:02 node3 vmunix: scsi1 at tcds0 slot 1 Sep 3 08:26:02 node3 vmunix: bba0 at tc0 slot 7 Sep 3 08:26:02 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 3 08:26:02 node3 vmunix: ln0 at tc0 slot 7 Sep 3 08:26:02 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 3 08:26:02 node3 vmunix: fb0 at tc0 slot 0 Sep 3 08:26:02 node3 vmunix: 1280X1024 Sep 3 08:26:02 node3 vmunix: DEC 3000 - M600 system Sep 3 08:26:02 node3 vmunix: Firmware revision: 7.0 Sep 3 08:26:02 node3 vmunix: PALcode: UNIX version 1.45 Sep 3 08:26:02 node3 vmunix: dli: configured Sep 3 08:26:02 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 3 08:26:02 node3 vmunix: ln0: lost carrier: check connector Sep 3 08:26:02 node3 vmunix: ln0: lost carrier: check connector Sep 3 08:26:14 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 3 08:26:19 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Sep 3 08:38:16 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 3 08:38:16 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 3 08:38:16 node3 vmunix: physical memory = 128.00 megabytes. Sep 3 08:38:16 node3 vmunix: available memory = 118.80 megabytes. Sep 3 08:38:16 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 3 08:38:16 node3 vmunix: tc0 at nexus Sep 3 08:38:16 node3 vmunix: scc0 at tc0 slot 7 Sep 3 08:38:16 node3 vmunix: tcds0 at tc0 slot 6 Sep 3 08:38:16 node3 vmunix: scsi0 at tcds0 slot 0 Sep 3 08:38:16 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 3 08:38:16 node3 vmunix: rz1 at scsi0 target 1 lun 0 (LID=1) (QUANTUM ATLAS10K3_18_SCA 020W) (Wide16) Sep 3 08:38:16 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=2) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 3 08:38:16 node3 vmunix: scsi1 at tcds0 slot 1 Sep 3 08:38:16 node3 vmunix: bba0 at tc0 slot 7 Sep 3 08:38:16 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 3 08:38:16 node3 vmunix: ln0 at tc0 slot 7 Sep 3 08:38:16 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 3 08:38:16 node3 vmunix: fb0 at tc0 slot 0 Sep 3 08:38:16 node3 vmunix: 1280X1024 Sep 3 08:38:17 node3 vmunix: DEC 3000 - M600 system Sep 3 08:38:17 node3 vmunix: Firmware revision: 7.0 Sep 3 08:38:17 node3 vmunix: PALcode: UNIX version 1.45 Sep 3 08:38:17 node3 vmunix: dli: configured Sep 3 08:38:17 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 3 08:38:28 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 3 08:38:33 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Sep 3 08:41:28 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 3 08:41:28 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 3 08:41:28 node3 vmunix: physical memory = 128.00 megabytes. Sep 3 08:41:28 node3 vmunix: available memory = 118.80 megabytes. Sep 3 08:41:28 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 3 08:41:28 node3 vmunix: tc0 at nexus Sep 3 08:41:28 node3 vmunix: scc0 at tc0 slot 7 Sep 3 08:41:28 node3 vmunix: tcds0 at tc0 slot 6 Sep 3 08:41:28 node3 vmunix: scsi0 at tcds0 slot 0 Sep 3 08:41:28 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 3 08:41:28 node3 vmunix: rz1 at scsi0 target 1 lun 0 (LID=1) (QUANTUM ATLAS10K3_18_SCA 020W) (Wide16) Sep 3 08:41:28 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=2) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 3 08:41:28 node3 vmunix: scsi1 at tcds0 slot 1 Sep 3 08:41:28 node3 vmunix: rz10 at scsi1 target 2 lun 0 (LID=3) (DEC RRD43 (C) DEC 1084) Sep 3 08:41:28 node3 vmunix: rz11 at scsi1 target 3 lun 0 (LID=4) (IBM DXHS18Y 0430) Sep 3 08:41:28 node3 vmunix: tz13 at scsi1 target 5 lun 0 (LID=5) () Sep 3 08:41:28 node3 vmunix: bba0 at tc0 slot 7 Sep 3 08:41:28 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 3 08:41:28 node3 vmunix: ln0 at tc0 slot 7 Sep 3 08:41:28 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 3 08:41:28 node3 vmunix: fb0 at tc0 slot 0 Sep 3 08:41:28 node3 vmunix: 1280X1024 Sep 3 08:41:28 node3 vmunix: DEC 3000 - M600 system Sep 3 08:41:28 node3 vmunix: Firmware revision: 7.0 Sep 3 08:41:28 node3 vmunix: PALcode: UNIX version 1.45 Sep 3 08:41:28 node3 vmunix: dli: configured Sep 3 08:41:28 node3 vmunix: cam_logger: CAM_ERROR packet Sep 3 08:41:28 node3 vmunix: cam_logger: bus 1 target 5 lun 0 Sep 3 08:41:28 node3 vmunix: ss_device_reset_done Sep 3 08:41:28 node3 vmunix: Bus device reset has been performed Sep 3 08:41:28 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 3 08:41:28 node3 vmunix: Sep 3 08:41:28 node3 vmunix: Sep 3 08:41:28 node3 vmunix: WARNING: preposterous time in TOY clock -- CHECK AND RESET THE DATE!! Sep 3 08:41:28 node3 vmunix: Sep 3 08:41:40 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 3 08:41:44 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Sep 3 08:57:46 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 3 08:57:46 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 3 08:57:46 node3 vmunix: physical memory = 128.00 megabytes. Sep 3 08:57:46 node3 vmunix: available memory = 118.80 megabytes. Sep 3 08:57:46 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 3 08:57:46 node3 vmunix: tc0 at nexus Sep 3 08:57:46 node3 vmunix: scc0 at tc0 slot 7 Sep 3 08:57:46 node3 vmunix: tcds0 at tc0 slot 6 Sep 3 08:57:46 node3 vmunix: scsi0 at tcds0 slot 0 Sep 3 08:57:46 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 3 08:57:46 node3 vmunix: rz1 at scsi0 target 1 lun 0 (LID=1) (QUANTUM ATLAS10K3_18_SCA 020W) (Wide16) Sep 3 08:57:46 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=2) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 3 08:57:46 node3 vmunix: scsi1 at tcds0 slot 1 Sep 3 08:57:46 node3 vmunix: bba0 at tc0 slot 7 Sep 3 08:57:46 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 3 08:57:46 node3 vmunix: ln0 at tc0 slot 7 Sep 3 08:57:46 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 3 08:57:46 node3 vmunix: fb0 at tc0 slot 0 Sep 3 08:57:46 node3 vmunix: 1280X1024 Sep 3 08:57:46 node3 vmunix: DEC 3000 - M600 system Sep 3 08:57:46 node3 vmunix: Firmware revision: 7.0 Sep 3 08:57:46 node3 vmunix: PALcode: UNIX version 1.45 Sep 3 08:57:46 node3 vmunix: dli: configured Sep 3 08:57:46 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 3 08:57:58 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 3 08:58:03 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Sep 3 14:51:35 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 3 14:51:35 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 3 14:51:35 node3 vmunix: physical memory = 128.00 megabytes. Sep 3 14:51:35 node3 vmunix: available memory = 118.80 megabytes. Sep 3 14:51:35 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 3 14:51:35 node3 vmunix: tc0 at nexus Sep 3 14:51:35 node3 vmunix: scc0 at tc0 slot 7 Sep 3 14:51:35 node3 vmunix: tcds0 at tc0 slot 6 Sep 3 14:51:35 node3 vmunix: scsi0 at tcds0 slot 0 Sep 3 14:51:35 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 3 14:51:35 node3 vmunix: rz1 at scsi0 target 1 lun 0 (LID=1) (QUANTUM ATLAS10K3_18_SCA 020W) (Wide16) Sep 3 14:51:35 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=2) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 3 14:51:36 node3 vmunix: scsi1 at tcds0 slot 1 Sep 3 14:51:36 node3 vmunix: bba0 at tc0 slot 7 Sep 3 14:51:36 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 3 14:51:36 node3 vmunix: ln0 at tc0 slot 7 Sep 3 14:51:36 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 3 14:51:36 node3 vmunix: fb0 at tc0 slot 0 Sep 3 14:51:36 node3 vmunix: 1280X1024 Sep 3 14:51:36 node3 vmunix: DEC 3000 - M600 system Sep 3 14:51:36 node3 vmunix: Firmware revision: 7.0 Sep 3 14:51:36 node3 vmunix: PALcode: UNIX version 1.45 Sep 3 14:51:36 node3 vmunix: dli: configured Sep 3 14:51:36 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 3 14:51:36 node3 vmunix: chk_bf_quota: user quota underflow for user 13 on fileset / Sep 3 14:51:45 node3 vmunix: chk_bf_quota: group quota underflow for group 7 on fileset / Sep 3 14:51:47 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 3 14:51:52 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Sep 4 05:44:56 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 4 05:44:56 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 4 05:44:56 node3 vmunix: physical memory = 128.00 megabytes. Sep 4 05:44:56 node3 vmunix: available memory = 118.80 megabytes. Sep 4 05:44:56 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 4 05:44:57 node3 vmunix: tc0 at nexus Sep 4 05:44:57 node3 vmunix: scc0 at tc0 slot 7 Sep 4 05:44:57 node3 vmunix: tcds0 at tc0 slot 6 Sep 4 05:44:57 node3 vmunix: scsi0 at tcds0 slot 0 Sep 4 05:44:57 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 4 05:44:57 node3 vmunix: rz1 at scsi0 target 1 lun 0 (LID=1) (QUANTUM ATLAS10K3_18_SCA 020W) (Wide16) Sep 4 05:44:57 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=2) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 4 05:44:57 node3 vmunix: scsi1 at tcds0 slot 1 Sep 4 05:44:57 node3 vmunix: rz10 at scsi1 target 2 lun 0 (LID=3) (DEC RRD43 (C) DEC 1084) Sep 4 05:44:57 node3 vmunix: rz11 at scsi1 target 3 lun 0 (LID=4) (IBM DXHS 0430) Sep 4 05:44:57 node3 vmunix: tz13 at scsi1 target 5 lun 0 (LID=5) () Sep 4 05:44:57 node3 vmunix: bba0 at tc0 slot 7 Sep 4 05:44:57 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 4 05:44:57 node3 vmunix: ln0 at tc0 slot 7 Sep 4 05:44:57 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 4 05:44:57 node3 vmunix: fb0 at tc0 slot 0 Sep 4 05:44:57 node3 vmunix: 1280X1024 Sep 4 05:44:57 node3 vmunix: DEC 3000 - M600 system Sep 4 05:44:57 node3 vmunix: Firmware revision: 7.0 Sep 4 05:44:57 node3 vmunix: PALcode: UNIX version 1.45 Sep 4 05:44:57 node3 vmunix: dli: configured Sep 4 05:44:57 node3 vmunix: cam_logger: CAM_ERROR packet Sep 4 05:44:57 node3 vmunix: cam_logger: bus 1 target 5 lun 0 Sep 4 05:44:57 node3 vmunix: ss_device_reset_done Sep 4 05:44:57 node3 vmunix: Bus device reset has been performed Sep 4 05:44:57 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 4 05:44:57 node3 vmunix: chk_bf_quota: user quota underflow for user 13 on fileset / Sep 4 05:45:08 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 4 05:45:13 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved. Sep 4 06:18:19 node3 vmunix: Alpha boot: available memory from 0x936000 to 0x8000000 Sep 4 06:18:20 node3 vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Aug 30 11:37:21 BST 2007 Sep 4 06:18:20 node3 vmunix: physical memory = 128.00 megabytes. Sep 4 06:18:20 node3 vmunix: available memory = 118.80 megabytes. Sep 4 06:18:20 node3 vmunix: using 483 buffers containing 3.77 megabytes of memory Sep 4 06:18:20 node3 vmunix: tc0 at nexus Sep 4 06:18:20 node3 vmunix: scc0 at tc0 slot 7 Sep 4 06:18:20 node3 vmunix: tcds0 at tc0 slot 6 Sep 4 06:18:20 node3 vmunix: scsi0 at tcds0 slot 0 Sep 4 06:18:20 node3 vmunix: rz0 at scsi0 target 0 lun 0 (LID=0) (QUANTUM ATLAS10K2-TY184J DDD6) (Wide16) Sep 4 06:18:20 node3 vmunix: rz1 at scsi0 target 1 lun 0 (LID=1) (QUANTUM ATLAS10K3_18_SCA 020W) (Wide16) Sep 4 06:18:20 node3 vmunix: rz4 at scsi0 target 4 lun 0 (LID=2) (PLEXTOR CD-ROM PX-40TS 1.12) Sep 4 06:18:20 node3 vmunix: scsi1 at tcds0 slot 1 Sep 4 06:18:20 node3 vmunix: rz10 at scsi1 target 2 lun 0 (LID=3) (DEC RRD43 (C) DEC 1084) Sep 4 06:18:20 node3 vmunix: rz11 at scsi1 target 3 lun 0 (LID=4) (IBM DXHS18Y 0430) Sep 4 06:18:20 node3 vmunix: tz13 at scsi1 target 5 lun 0 (LID=5) () Sep 4 06:18:20 node3 vmunix: bba0 at tc0 slot 7 Sep 4 06:18:20 node3 vmunix: ln0: DEC LANCE Module Name: PMAD-BA Sep 4 06:18:20 node3 vmunix: ln0 at tc0 slot 7 Sep 4 06:18:20 node3 vmunix: ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-BB-81-C9 Sep 4 06:18:20 node3 vmunix: fb0 at tc0 slot 0 Sep 4 06:18:20 node3 vmunix: 1280X1024 Sep 4 06:18:20 node3 vmunix: DEC 3000 - M600 system Sep 4 06:18:20 node3 vmunix: Firmware revision: 7.0 Sep 4 06:18:20 node3 vmunix: PALcode: UNIX version 1.45 Sep 4 06:18:20 node3 vmunix: dli: configured Sep 4 06:18:20 node3 vmunix: cam_logger: CAM_ERROR packet Sep 4 06:18:20 node3 vmunix: cam_logger: bus 1 target 5 lun 0 Sep 4 06:18:20 node3 vmunix: ss_device_reset_done Sep 4 06:18:20 node3 vmunix: Bus device reset has been performed Sep 4 06:18:20 node3 vmunix: ADVFS: using 1152 buffers containing 9.00 megabytes of memory Sep 4 06:18:31 node3 vmunix: Environmental Monitoring Subsystem Configured. Sep 4 06:18:36 node3 vmunix: SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved.
Operational: Very large number of files were found in the /tmp ( 1131 ) directory.
Use a startup procedure to clean up these files when the system boots.
The binlog.conf file describes where binlogd logs messages.
*.* /usr/adm/binary.errlog dumpfile /usr/adm/crash/binlogdumpfile crdlog /usr/adm/binary.crdlog
ls -Ll /usr/adm/binary.errlog
-rw-r----- 1 root adm 14832 Sep 5 12:48 /usr/adm/binary.errlog
Last 500 lines of uerf output:
uerf version 4.2-011 (122)
********************************* ENTRY 1. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue Sep 4 06:18:19 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x936000 to 0x8000000
Digital UNIX V4.0G (Rev. 1530); Thu
_Aug 30 11:37:21 BST 2007
physical memory = 128.00 megabytes.
available memory = 118.80 megabytes.
using 483 buffers containing 3.77
_megabytes of memory
tc0 at nexus
scc0 at tc0 slot 7
tcds0 at tc0 slot 6
scsi0 at tcds0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(QUANTUM ATLAS10K2-TY184J DDD6)
_(Wide16)
rz1 at scsi0 target 1 lun 0 (LID=1)
_(QUANTUM ATLAS10K3_18_SCA 020W)
_(Wide16)
rz4 at scsi0 target 4 lun 0 (LID=2)
_(PLEXTOR CD-ROM PX-40TS 1.12)
scsi1 at tcds0 slot 1
rz10 at scsi1 target 2 lun 0 (LID=3)
_(DEC RRD43 (C) DEC 1084)
rz11 at scsi1 target 3 lun 0 (LID=4)
_(IBM DXHS18Y 0430)
tz13 at scsi1 target 5 lun 0 (LID=5)
_()
bba0 at tc0 slot 7
ln0: DEC LANCE Module Name: PMAD-BA
ln0 at tc0 slot 7
ln0: DEC LANCE Ethernet Interface,
_hardware address: 08-00-2B-BB-81-C9
fb0 at tc0 slot 0
1280X1024
DEC 3000 - M600 system
Firmware revision: 7.0
PALcode: UNIX version 1.45
dli: configured
cam_logger: CAM_ERROR packet
cam_logger: bus 1 target 5 lun 0
ss_device_reset_done
Bus device reset has been performed
********************************* ENTRY 2. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 301. SYSTEM SHUTDOWN
SEQUENCE NUMBER 4.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue Sep 4 06:15:36 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE System rebooted by root:
********************************* ENTRY 3. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue Sep 4 05:44:56 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x936000 to 0x8000000
Digital UNIX V4.0G (Rev. 1530); Thu
_Aug 30 11:37:21 BST 2007
physical memory = 128.00 megabytes.
available memory = 118.80 megabytes.
using 483 buffers containing 3.77
_megabytes of memory
tc0 at nexus
scc0 at tc0 slot 7
tcds0 at tc0 slot 6
scsi0 at tcds0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(QUANTUM ATLAS10K2-TY184J DDD6)
_(Wide16)
rz1 at scsi0 target 1 lun 0 (LID=1)
_(QUANTUM ATLAS10K3_18_SCA 020W)
_(Wide16)
rz4 at scsi0 target 4 lun 0 (LID=2)
_(PLEXTOR CD-ROM PX-40TS 1.12)
scsi1 at tcds0 slot 1
rz10 at scsi1 target 2 lun 0 (LID=3)
_(DEC RRD43 (C) DEC 1084)
rz11 at scsi1 target 3 lun 0 (LID=4)
_(IBM DXHS 0430)
tz13 at scsi1 target 5 lun 0 (LID=5)
_()
bba0 at tc0 slot 7
ln0: DEC LANCE Module Name: PMAD-BA
ln0 at tc0 slot 7
ln0: DEC LANCE Ethernet Interface,
_hardware address: 08-00-2B-BB-81-C9
fb0 at tc0 slot 0
1280X1024
DEC 3000 - M600 system
Firmware revision: 7.0
PALcode: UNIX version 1.45
dli: configured
cam_logger: CAM_ERROR packet
cam_logger: bus 1 target 5 lun 0
ss_device_reset_done
Bus device reset has been performed
********************************* ENTRY 4. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 301. SYSTEM SHUTDOWN
SEQUENCE NUMBER 90.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue Sep 4 05:42:37 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE System halted by msw:
********************************* ENTRY 5. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Mon Sep 3 14:51:35 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x936000 to 0x8000000
Digital UNIX V4.0G (Rev. 1530); Thu
_Aug 30 11:37:21 BST 2007
physical memory = 128.00 megabytes.
available memory = 118.80 megabytes.
using 483 buffers containing 3.77
_megabytes of memory
tc0 at nexus
scc0 at tc0 slot 7
tcds0 at tc0 slot 6
scsi0 at tcds0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(QUANTUM ATLAS10K2-TY184J DDD6)
_(Wide16)
rz1 at scsi0 target 1 lun 0 (LID=1)
_(QUANTUM ATLAS10K3_18_SCA 020W)
_(Wide16)
rz4 at scsi0 target 4 lun 0 (LID=2)
_(PLEXTOR CD-ROM PX-40TS 1.12)
scsi1 at tcds0 slot 1
bba0 at tc0 slot 7
ln0: DEC LANCE Module Name: PMAD-BA
ln0 at tc0 slot 7
ln0: DEC LANCE Ethernet Interface,
_hardware address: 08-00-2B-BB-81-C9
fb0 at tc0 slot 0
1280X1024
DEC 3000 - M600 system
Firmware revision: 7.0
PALcode: UNIX version 1.45
dli: configured
********************************* ENTRY 6. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 301. SYSTEM SHUTDOWN
SEQUENCE NUMBER 36.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Mon Sep 3 14:50:33 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE System rebooted by msw:
********************************* ENTRY 7. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Mon Sep 3 08:57:46 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x936000 to 0x8000000
Digital UNIX V4.0G (Rev. 1530); Thu
_Aug 30 11:37:21 BST 2007
physical memory = 128.00 megabytes.
available memory = 118.80 megabytes.
using 483 buffers containing 3.77
_megabytes of memory
tc0 at nexus
scc0 at tc0 slot 7
tcds0 at tc0 slot 6
scsi0 at tcds0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(QUANTUM ATLAS10K2-TY184J DDD6)
_(Wide16)
rz1 at scsi0 target 1 lun 0 (LID=1)
_(QUANTUM ATLAS10K3_18_SCA 020W)
_(Wide16)
rz4 at scsi0 target 4 lun 0 (LID=2)
_(PLEXTOR CD-ROM PX-40TS 1.12)
scsi1 at tcds0 slot 1
bba0 at tc0 slot 7
ln0: DEC LANCE Module Name: PMAD-BA
ln0 at tc0 slot 7
ln0: DEC LANCE Ethernet Interface,
_hardware address: 08-00-2B-BB-81-C9
fb0 at tc0 slot 0
1280X1024
DEC 3000 - M600 system
Firmware revision: 7.0
PALcode: UNIX version 1.45
dli: configured
********************************* ENTRY 8. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Mon Sep 3 08:41:28 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x936000 to 0x8000000
Digital UNIX V4.0G (Rev. 1530); Thu
_Aug 30 11:37:21 BST 2007
physical memory = 128.00 megabytes.
available memory = 118.80 megabytes.
using 483 buffers containing 3.77
_megabytes of memory
tc0 at nexus
scc0 at tc0 slot 7
tcds0 at tc0 slot 6
scsi0 at tcds0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(QUANTUM ATLAS10K2-TY184J DDD6)
_(Wide16)
rz1 at scsi0 target 1 lun 0 (LID=1)
_(QUANTUM ATLAS10K3_18_SCA 020W)
_(Wide16)
rz4 at scsi0 target 4 lun 0 (LID=2)
_(PLEXTOR CD-ROM PX-40TS 1.12)
scsi1 at tcds0 slot 1
rz10 at scsi1 target 2 lun 0 (LID=3)
_(DEC RRD43 (C) DEC 1084)
rz11 at scsi1 target 3 lun 0 (LID=4)
_(IBM DXHS18Y 0430)
tz13 at scsi1 target 5 lun 0 (LID=5)
_()
bba0 at tc0 slot 7
ln0: DEC LANCE Module Name: PMAD-BA
ln0 at tc0 slot 7
ln0: DEC LANCE Ethernet Interface,
_hardware address: 08-00-2B-BB-81-C9
fb0 at tc0 slot 0
1280X1024
DEC 3000 - M600 system
Firmware revision: 7.0
PALcode: UNIX version 1.45
dli: configured
cam_logger: CAM_ERROR packet
cam_logger: bus 1 target 5 lun 0
ss_device_reset_done
Bus device reset has been performed
********************************* ENTRY 9. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Mon Sep 3 08:38:16 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x936000 to 0x8000000
Digital UNIX V4.0G (Rev. 1530); Thu
_Aug 30 11:37:21 BST 2007
physical memory = 128.00 megabytes.
available memory = 118.80 megabytes.
using 483 buffers containing 3.77
_megabytes of memory
tc0 at nexus
scc0 at tc0 slot 7
tcds0 at tc0 slot 6
scsi0 at tcds0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(QUANTUM ATLAS10K2-TY184J DDD6)
_(Wide16)
rz1 at scsi0 target 1 lun 0 (LID=1)
_(QUANTUM ATLAS10K3_18_SCA 020W)
_(Wide16)
rz4 at scsi0 target 4 lun 0 (LID=2)
_(PLEXTOR CD-ROM PX-40TS 1.12)
scsi1 at tcds0 slot 1
bba0 at tc0 slot 7
ln0: DEC LANCE Module Name: PMAD-BA
ln0 at tc0 slot 7
ln0: DEC LANCE Ethernet Interface,
_hardware address: 08-00-2B-BB-81-C9
fb0 at tc0 slot 0
1280X1024
DEC 3000 - M600 system
Firmware revision: 7.0
PALcode: UNIX version 1.45
dli: configured
********************************* ENTRY 10. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Mon Sep 3 08:26:02 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x936000 to 0x8000000
Digital UNIX V4.0G (Rev. 1530); Thu
_Aug 30 11:37:21 BST 2007
physical memory = 128.00 megabytes.
available memory = 118.80 megabytes.
using 483 buffers containing 3.77
_megabytes of memory
tc0 at nexus
scc0 at tc0 slot 7
tcds0 at tc0 slot 6
scsi0 at tcds0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(QUANTUM ATLAS10K2-TY184J DDD6)
_(Wide16)
rz1 at scsi0 target 1 lun 0 (LID=1)
_(QUANTUM ATLAS10K3_18_SCA 020W)
_(Wide16)
rz4 at scsi0 target 4 lun 0 (LID=2)
_(PLEXTOR CD-ROM PX-40TS 1.12)
scsi1 at tcds0 slot 1
bba0 at tc0 slot 7
ln0: DEC LANCE Module Name: PMAD-BA
ln0 at tc0 slot 7
ln0: DEC LANCE Ethernet Interface,
_hardware address: 08-00-2B-BB-81-C9
fb0 at tc0 slot 0
1280X1024
DEC 3000 - M600 system
Firmware revision: 7.0
PALcode: UNIX version 1.45
dli: configured
********************************* ENTRY 11. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 301. SYSTEM SHUTDOWN
SEQUENCE NUMBER 1.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Sun Sep 2 21:45:49 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE System halted by root:
********************************* ENTRY 12. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Sun Sep 2 21:41:52 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x936000 to 0x8000000
Digital UNIX V4.0G (Rev. 1530); Thu
_Aug 30 11:37:21 BST 2007
physical memory = 128.00 megabytes.
available memory = 118.80 megabytes.
using 483 buffers containing 3.77
_megabytes of memory
tc0 at nexus
scc0 at tc0 slot 7
tcds0 at tc0 slot 6
scsi0 at tcds0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(QUANTUM ATLAS10K2-TY184J DDD6)
_(Wide16)
rz1 at scsi0 target 1 lun 0 (LID=1)
_(QUANTUM ATLAS10K3_18_SCA 020W)
_(Wide16)
rz4 at scsi0 target 4 lun 0 (LID=2)
_(PLEXTOR CD-ROM PX-40TS 1.12)
scsi1 at tcds0 slot 1
rz10 at scsi1 target 2 lun 0 (LID=3)
_(DEC RRD43 (C) DEC 1084)
rz11 at scsi1 target 3 lun 0 (LID=4)
_(IBM DXHS18Y 0430)
tz13 at scsi1 target 5 lun 0 (LID=5)
_()
bba0 at tc0 slot 7
ln0: DEC LANCE Module Name: PMAD-BA
ln0 at tc0 slot 7
ln0: DEC LANCE Ethernet Interface,
_hardware address: 08-00-2B-BB-81-C9
fb0 at tc0 slot 0
1280X1024
DEC 3000 - M600 system
Firmware revision: 7.0
PALcode: UNIX version 1.45
dli: configured
cam_logger: CAM_ERROR packet
cam_logger: bus 1 target 5 lun 0
ss_device_reset_done
Bus device reset has been performed
********************************* ENTRY 13. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 301. SYSTEM SHUTDOWN
SEQUENCE NUMBER 2.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Sun Sep 2 21:41:31 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
MESSAGE System halted by root:
********************************* ENTRY 14. *********************************
----- EVENT INFORMATION -----
EVENT CLASS ERROR EVENT
OS EVENT TYPE 199. CAM SCSI
SEQUENCE NUMBER 1.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Sun Sep 2 21:32:15 2007
OCCURRED ON SYSTEM node3
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
----- UNIT INFORMATION -----
CLASS x0000 DISK
SUBSYSTEM x0000 DISK
BUS # x0000
x0008 LUN x0
TARGET x1
----- CAM STRING -----
ROUTINE NAME cdisk_op_spin
----- CAM STRING -----
Warning: DECevent is not installed.
Compaq Computer Corporation requires that customers use DECevent to view log files
of system errors. You must install DECevent.
For information on DECevent, see the
DECevent
home page.
SAVECORE_DIR: /var/adm/crash
SAVECORE_FLAGS:
Current dump type: Partial compressed
Current estimated dump size: 26244 KB ( 25 MB )
Crash kernel variables:
dbx version 3.11.10 Type 'help' for help. stopped at [thread_block:2366 ,0xfffffc00002c53e0] Source not available warning: Files compiled -g3: parameter values probably wrong ====== partial_dump: 1 ====== compressed_dump: 1
Crash files were not found.
SECURITY:
SECURE_CONSOLE:
The shells file contains shells that are valid for use on the system.
/usr/bin/sh /usr/bin/csh /usr/bin/ksh /usr/bin/posix/sh /bin/sh /bin/csh /bin/ksh
The profile file contains startup information for the sh and ksh shells.
trap "" 2 3
export LOGNAME TERM
. /etc/TIMEZONE
case "$0" in
-su )
export PATH
;;
-sh )
export PATH
;;
-ksh )
export PATH
;;
esac
umask 022
trap 2 3
The csh.login file contains startup information for the csh shell.
stty dec crt new
The ftpusers file contains a list of users who are denied ftp login.
root uucp
passwd file has 15 lines.
ls -l /etc/passwd*
-rw-r--r-- 1 root system 790 Aug 30 21:20 /etc/passwd
The passwd, tcb, group, matrix.conf hosts.lpd hosts.equiv .rhosts, syslog.auth, and cfgmgr.auth files are not displayed because of security reasons.
Use the sys_check -all option to display these files.
AUDITD_FLAG:
AUDITMASK_FLAG:
The /etc/sec/auditd_clients file is not available.
The /etc/sec/auditd_loc file is not available.
The audit_events file lists all auditable system calls and trusted application events.
! Audited system calls: exit succeed fail fork succeed fail old open succeed fail close succeed old creat succeed fail link succeed fail unlink succeed fail execv succeed fail chdir succeed fail fchdir succeed fail mknod succeed fail chmod succeed fail chown succeed fail classcntl succeed fail mount succeed fail unmount succeed fail setuid succeed fail exec_with_loader succeed fail ptrace succeed fail nrecvmsg succeed fail nsendmsg succeed fail nrecvfrom succeed fail naccept succeed fail access succeed fail kill succeed fail old stat succeed fail setpgid succeed fail old lstat succeed fail dup succeed fail pipe succeed fail open succeed fail setlogin succeed fail acct succeed fail ioctl succeed fail reboot succeed fail revoke succeed fail symlink succeed fail readlink succeed fail execve succeed fail chroot succeed fail old fstat succeed fail vfork succeed fail stat succeed fail lstat succeed fail mmap succeed fail munmap succeed fail mprotect succeed fail old vhangup succeed fail kmodcall succeed fail setgroups succeed fail setpgrp succeed fail table succeed fail sethostname succeed fail dup2 succeed fail fstat succeed fail fcntl succeed fail setpriority succeed fail socket succeed fail connect succeed fail accept succeed fail bind succeed fail setsockopt succeed fail recvmsg succeed fail sendmsg succeed fail settimeofday succeed fail fchown succeed fail fchmod succeed fail recvfrom succeed fail setreuid succeed fail setregid succeed fail rename succeed fail truncate succeed fail ftruncate succeed fail setgid succeed fail sendto succeed fail shutdown succeed fail socketpair succeed fail mkdir succeed fail rmdir succeed fail utimes succeed fail adjtime succeed fail sethostid succeed fail old killpg succeed fail setsid succeed fail getdirentries succeed fail setdomainname succeed fail exportfs succeed fail getmnt succeed fail alternate setsid succeed fail statfs succeed fail fstatfs succeed fail getfsstat succeed fail swapon succeed fail msgctl succeed fail msgget succeed fail msgrcv succeed fail msgsnd succeed fail semctl succeed fail semget succeed fail semop succeed fail lchown succeed fail shmat succeed fail shmctl succeed fail shmdt succeed fail shmget succeed fail utc_adjtime succeed fail security succeed fail kloadcall succeed fail priocntlset succeed fail sigsendset succeed fail msfs_syscall succeed fail sysinfo succeed fail uadmin succeed fail fuser succeed fail audcntl succeed fail setsysinfo succeed fail swapctl succeed fail memcntl succeed fail proplist_syscall succeed fail pid_unblock succeed fail ntp_adjtime succeed fail SystemV/unlink succeed fail SystemV/open succeed fail RT/memlk succeed fail RT/memunlk succeed fail RT/psx4_time_drift succeed fail RT/rt_setprio succeed fail ! Audited trusted events: audit_start succeed fail audit_stop succeed fail audit_setup succeed fail audit_suspend succeed fail audit_log_change succeed fail audit_log_creat succeed fail audit_xmit_fail succeed fail audit_reboot succeed fail audit_log_overwrite succeed fail audit_daemon_exit succeed fail login succeed fail logout succeed fail auth_event succeed fail audgen8 succeed fail
The event_aliases file lists aliases for logically related groupings of events.
obj_creat: "old open" "old creat" link mknod open symlink mkdir SystemV/open
obj_delete: unlink truncate ftruncate SystemV/unlink rmdir
exec: execv exec_with_loader execve
obj_access: access "old stat" "old lstat" "old open" open statfs fstatfs \
readlink "old fstat" stat lstat fstat close:1:0 dup dup2 fcntl \
"old creat" mmap munmap mprotect memcntl SystemV/open
obj_modify: chmod chown fchown fchmod lchown utimes rename
ipc: recvmsg nrecvmsg recvfrom nrecvfrom sendmsg nsendmsg sendto accept \
naccept connect socket bind shutdown socketpair pipe sysV_ipc \
kill "old killpg" setsockopt sigsendset
sysV_ipc: msgctl msgget msgrcv msgsnd shmat shmctl shmdt shmget semctl \
semget semop
proc: exit fork chdir fchdir setuid ptrace setpgid setlogin chroot vfork \
setgroups setpgrp setpriority setreuid setregid setgid audcntl \
RT/rt_setprio setsid "alternate setsid" priocntlset
system: getfsstat mount unmount acct reboot table sethostname settimeofday \
adjtime sethostid setdomainname exportfs getmnt swapon utc_adjtime \
audcntl setsysinfo kloadcall getdirentries revoke "old vhangup" kmodcall \
security sysinfo uadmin swapctl
misc: ioctl msfs_syscall fuser
trusted_event: login logout auth_event audgen8
all: obj_creat obj_delete exec obj_access obj_modify ipc proc system misc \
trusted_event
The /etc/sec/site_events file is not available.
New CAM naming is disabled.
[rz0] [rz1] [rz4] [rz11] Tuning Note: Monitor disk performance statistics.
See
Managing Disk Storage Performance
in the
System Configuration and Tuning
The collect disk output averaged over 39 seconds:
awk: Cannot divide by zero. The input line number is 1. The source line number is 72. # DISK Statistics #DSK NAME B/T/L R/S RKB/S W/S WKB/S AVS AVW ACTQ WTQ %BSY QUE MAXQ 0 rm: /var/tmp/.e3_25265.gz: No such file or directory
CAM kernel variables:
dbx version 3.11.10
Type 'help' for help.
stopped at [thread_block:2366 ,0xfffffc00002c53e0] Source not available
warning: Files compiled -g3: parameter values probably wrong
====== xpt_qhead:
struct {
xws = struct {
x_flink = 0xfffffc000557e000
x_blink = 0xfffffc0004af1b00
xpt_flags = 2147483648
xpt_ccb = (nil)
xpt_nfree = 199
xpt_nbusy = 1
}
xpt_wait_cnt = 0
xpt_times_wait = 477
xpt_ccb_limit = 1048576
xpt_ccbs_total = 200
x_lk_qhead = struct {
sl_data = 0
sl_info = 0
sl_cpuid = 0
sl_lifms = 0
}
}
====== ccmn_bp_head:
struct {
num_bp = 50
bp_list = 0xfffffc0007f94200
bp_wait_cnt = 0
}
====== xpt_cb_queue:
struct {
flink = 0xfffffc00006e2d78
blink = 0xfffffc00006e2d78
flags = 0
initialized = 1
count = 0
cplt_lock = struct {
sl_data = 0
sl_info = 0
sl_cpuid = 0
sl_lifms = 0
}
}
Disk rz0 disk label: Bus 0 Target 0 Lun 0
/dev/rrz0a: character special (8/0) SCSI #0 ATLAS10K disk #0 (SCSI ID #0) (SCSI LUN #0)
# /dev/rrz0a: type: SCSI disk: ATLAS10K label: flags: dynamic_geometry bytes/sector: 512 sectors/track: 413 tracks/cylinder: 5 sectors/cylinder: 2065 cylinders: 17338 sectors/unit: 35860910 rpm: 10021 interleave: 1 trackskew: 15 cylinderskew: 20 headswitch: 0 # milliseconds track-to-track seek: 0 # milliseconds drivedata: 0 8 partitions: # size offset fstype [fsize bsize cpg] # NOTE: values not exact a: 262144 0 AdvFS # (Cyl. 0 - 126*) b: 262144 262144 swap # (Cyl. 126*- 253*) c: 35860910 0 unused 0 0 # (Cyl. 0 - 17366*) d: 11778874 524288 unused 0 0 # (Cyl. 253*- 5957*) e: 11778874 12303162 unused 0 0 # (Cyl. 5957*- 11662*) f: 11778874 24082036 AdvFS # (Cyl. 11662*- 17366*) g: 1433600 524288 4.2BSD 1024 8192 16 # (Cyl. 253*- 948*) h: 33903022 1957888 unused 0 0 # (Cyl. 948*- 17366*)
Disk rz1 disk label: Bus 0 Target 1 Lun 0
/dev/rrz1a: character special (8/1024) SCSI #0 ATLAS10K disk #8 (SCSI ID #1) (SCSI LUN #0)
Disk label was not found for rz1.
Disk rz4 disk label: Bus 0 Target 4 Lun 0
/dev/rrz4a: character special (8/4096) SCSI #0 CD-ROM P disk #32 (SCSI ID #4) (SCSI LUN #0)
# /dev/rrz4a: type: unknown disk: RZ26 label: V4.0Gr1530_O1 flags: bytes/sector: 512 sectors/track: 12800 tracks/cylinder: 1 sectors/cylinder: 12800 cylinders: 100 sectors/unit: 1280000 rpm: 5400 interleave: 1 trackskew: 7 cylinderskew: 25 headswitch: 0 # milliseconds track-to-track seek: 0 # milliseconds drivedata: 0 8 partitions: # size offset fstype [fsize bsize cpg] # NOTE: values not exact a: 1280000 0 unused 0 0 # (Cyl. 0 - 99) b: 0 0 unused 0 0 # (Cyl. 0 - -1) c: 1280000 0 4.2BSD 1024 8192 8 # (Cyl. 0 - 99) d: 0 0 unused 0 0 # (Cyl. 0 - -1) e: 0 0 unused 0 0 # (Cyl. 0 - -1) f: 0 0 unused 0 0 # (Cyl. 0 - -1) g: 0 0 unused 0 0 # (Cyl. 0 - -1) h: 0 0 unused 0 0 # (Cyl. 0 - -1)
Disk rz11 disk label: Bus 1 Target 3 Lun 0
/dev/rrz11a: character special (8/19456) SCSI #1 DXHS18Y disk #88 (SCSI ID #3) (SCSI LUN #0)
# /dev/rrz11a: type: SCSI disk: ibm18 label: flags: bytes/sector: 512 sectors/track: 413 tracks/cylinder: 5 sectors/cylinder: 2065 cylinders: 17338 sectors/unit: 35566480 rpm: 7200 interleave: 1 trackskew: 28 cylinderskew: 72 headswitch: 0 # milliseconds track-to-track seek: 0 # milliseconds drivedata: 0 8 partitions: # size offset fstype [fsize bsize cpg] # NOTE: values not exact a: 131072 0 unused 0 0 # (Cyl. 0 - 63*) b: 262144 131072 unused 0 0 # (Cyl. 63*- 190*) c: 35566480 0 swap # (Cyl. 0 - 17223*) d: 0 0 unused 0 0 # (Cyl. 0 - -1) e: 0 0 unused 0 0 # (Cyl. 0 - -1) f: 0 0 unused 0 0 # (Cyl. 0 - -1) g: 17586632 393216 unused 0 0 # (Cyl. 190*- 8706*) h: 17586632 17979848 unused 0 0 # (Cyl. 8706*- 17223*)
An HSZ was not found.
New CAM naming is disabled.
Tape rmt0 Bus 1 Target 5 Lun 0
/dev/nrmt0h: character special (9/21507) SCSI #1 TZ30 tape #5 (SCSI ID #5) (SCSI LUN #0) offline
Operational: Missing entry for scsi vendor QUANTUM in /etc/ddr.dbase.
This device is unrecognized by the system and may be operating
in an inefficient manner. (0 0 0)
Operational: Missing entry for scsi vendor PLEXTOR in /etc/ddr.dbase.
This device is unrecognized by the system and may be operating
in an inefficient manner. (0 4 0)
New CAM naming is disabled.
CAM Equipment Device Table (EDT) Information:
Device: ATLAS10K2-TY184J Bus: 0, Target: 0, Lun: 0, Type: Direct Access
Device: ATLAS10K3_18_SCA Bus: 0, Target: 1, Lun: 0, Type: Direct Access
Device: CD-ROM PX-40TS Bus: 0, Target: 4, Lun: 0, Type: Read-Only Direct Access
Device: RRD43 Bus: 1, Target: 2, Lun: 0, Type: Read-Only Direct Access
Device: DXHS18Y Bus: 1, Target: 3, Lun: 0, Type: Direct Access
Device: Bus: 1, Target: 5, Lun: 0, Type: Sequential Access
CAM Equipment Device Table (EDT) Information:
Inquiry Information:
SCSI Bus ID: 0
SCSI Target ID: 0
SCSI Target LUN: 0
Peripheral Device Type: 0 (Direct Access)
Peripheral Qualifier: 0 (Peripheral Device Connected)
Device Type Modifier: 0
Removable Media: No
ANSI Version: 3 (Complies to ANSI X3.xxx-199x, SCSI-3)
ECMA Version: 0
ISO Version: 0
Response Data Format: 2 (SCSI-2)
Normal ACA Support: No
Terminate I/O Process: No
Additional Length: 91
Medium Changer Support: No
Multi-port Device Support: No
Soft Reset Support: No
Command Queuing Support: Yes
Target Transfer Disable: Yes
Linked Command Support: Yes
Synchronous Data Transfers: Yes
Support for 16 Bit Transfers: Yes
Support for 32 Bit Transfers: No
Relative Addressing Support: No
Vendor Identification: QUANTUM
Product Identification: ATLAS10K2-TY184J
Firmware Revision Level: DDD6
CAM Equipment Device Table (EDT) Information:
Inquiry Information:
SCSI Bus ID: 0
SCSI Target ID: 1
SCSI Target LUN: 0
Peripheral Device Type: 0 (Direct Access)
Peripheral Qualifier: 0 (Peripheral Device Connected)
Device Type Modifier: 0
Removable Media: No
ANSI Version: 3 (Complies to ANSI X3.xxx-199x, SCSI-3)
ECMA Version: 0
ISO Version: 0
Response Data Format: 2 (SCSI-2)
Normal ACA Support: No
Terminate I/O Process: No
Additional Length: 91
Medium Changer Support: No
Multi-port Device Support: No
Soft Reset Support: No
Command Queuing Support: Yes
Target Transfer Disable: Yes
Linked Command Support: Yes
Synchronous Data Transfers: Yes
Support for 16 Bit Transfers: Yes
Support for 32 Bit Transfers: No
Relative Addressing Support: No
Vendor Identification: QUANTUM
Product Identification: ATLAS10K3_18_SCA
Firmware Revision Level: 020W
CAM Equipment Device Table (EDT) Information:
Inquiry Information:
SCSI Bus ID: 0
SCSI Target ID: 4
SCSI Target LUN: 0
Peripheral Device Type: 0x5 (Read-Only Direct Access)
Peripheral Qualifier: 0 (Peripheral Device Connected)
Device Type Modifier: 0
Removable Media: Yes
ANSI Version: 2 (Complies to ANSI X3.131-1994, SCSI-2)
ECMA Version: 0
ISO Version: 0
Response Data Format: 2 (SCSI-2)
Terminate I/O Process: No
Additional Length: 51
Soft Reset Support: No
Command Queuing Support: No
Target Transfer Disable: No
Linked Command Support: Yes
Synchronous Data Transfers: Yes
Support for 16 Bit Transfers: No
Support for 32 Bit Transfers: No
Relative Addressing Support: No
Vendor Identification: PLEXTOR
Product Identification: CD-ROM PX-40TS
Firmware Revision Level: 1.12
CAM Equipment Device Table (EDT) Information:
Inquiry Information:
SCSI Bus ID: 1
SCSI Target ID: 2
SCSI Target LUN: 0
Peripheral Device Type: 0x5 (Read-Only Direct Access)
Peripheral Qualifier: 0 (Peripheral Device Connected)
Device Type Modifier: 0
Removable Media: Yes
ANSI Version: 2 (Complies to ANSI X3.131-1994, SCSI-2)
ECMA Version: 0
ISO Version: 0
Response Data Format: 2 (SCSI-2)
Terminate I/O Process: No
Additional Length: 31
Soft Reset Support: No
Command Queuing Support: No
Target Transfer Disable: No
Linked Command Support: Yes
Synchronous Data Transfers: Yes
Support for 16 Bit Transfers: No
Support for 32 Bit Transfers: No
Relative Addressing Support: Yes
Vendor Identification: DEC
Product Identification: RRD43 (C) DEC
Firmware Revision Level: 1084
CAM Equipment Device Table (EDT) Information:
Inquiry Information:
SCSI Bus ID: 1
SCSI Target ID: 3
SCSI Target LUN: 0
Peripheral Device Type: 0 (Direct Access)
Peripheral Qualifier: 0 (Peripheral Device Connected)
Device Type Modifier: 0
Removable Media: No
ANSI Version: 3 (Complies to ANSI X3.xxx-199x, SCSI-3)
ECMA Version: 0
ISO Version: 0
Response Data Format: 2 (SCSI-2)
Normal ACA Support: No
Terminate I/O Process: No
Additional Length: 159
Medium Changer Support: No
Multi-port Device Support: No
Soft Reset Support: No
Command Queuing Support: Yes
Target Transfer Disable: No
Linked Command Support: Yes
Synchronous Data Transfers: Yes
Support for 16 Bit Transfers: No
Support for 32 Bit Transfers: No
Relative Addressing Support: No
Vendor Identification: IBM
Product Identification: DXHS18Y
Firmware Revision Level: 0430
CAM Equipment Device Table (EDT) Information:
Inquiry Information:
SCSI Bus ID: 1
SCSI Target ID: 5
SCSI Target LUN: 0
Peripheral Device Type: 0x1 (Sequential Access)
Peripheral Qualifier: 0 (Peripheral Device Connected)
Device Type Modifier: 0x30
Removable Media: Yes
ANSI Version: 1 (Complies to ANSI X3.131-1986, SCSI-1)
ECMA Version: 0
ISO Version: 0
Response Data Format: 0 (SCSI-1)
Additional Length: 0
The ddr.dbase file contains a list of SCSI CAM device definitions.
VERSION = 1
GLOBAL
#
# The values in this GLOBAL section control how the kernel routine
# get_def_partitionmap() creates a default partition layout
# based on a disk's capacity and blocksize.
#
# Creates a partition map as follows :
#
# The "a" partition will be "Partition_A_size" MB in size,
# starting at block 0.
#
# The "b" partition will be "Partition_B_size" MB in size,
# starting after "a".
#
# The "c" partition will span the entire disk.
#
# The "d", "e", and "f" partitions will be undefined with
# lengths of zero.
#
# The "g" partition will be :
# The larger of 1/2 the remaining capacity or
# "Partition_G_size" MB.
# The partition will start after "b".
#
# The "h" partition will be the remainder of the disk,
# starting after "g".
#
# If a partition cannot be fully allocated, it will be allocated
# with whatever capacity remains. All subsequent partitions
# will get "0" length.
#
# If the capacity remaining after a partition is allocated leaves
# less than "min_partition_size" MB, the remaining capacity will
# be added to the partition. All subsequent partitions will
# get "0" length.
#
#
# If these values are not specified (in this database), the system will
# default to:
# Partition_A_size = 64
# Partition_B_size = 128
# Partition_G_size = 400
# min_partition_size = 50
#
# set the default partition sizes (in MBytes)
Partition_A_size = 64
Partition_B_size = 128
Partition_G_size = 400
min_partition_size = 50
GLOBAL
# ##################################################################
#
# Supply everything for the SCSI Density Code translation table
#
# This "GLOBAL" section must appear before any SCSIDEVICE section.
#
# ##################################################################
#
# Table Size *MUST* be specified first
#
scsi_density_table_size = 0x42
#
# ##################################################################
#
# Entries - in the form:
#
# scsi_tape_density[<ansi density code>] = <name> <bpi> <block size>
#
# Note: <ansi density code> must be less than "scsi_density_table_size"
#
# Note: <name> provides a non-integer name that can be specified for
# the "DensityCode" value which is specified in a "DENSITY:"
# subsection for a "SCSIDEVICE" section.
# Note: <name> is not case-sensitive.
#
# Note: Unknown <bpi> values should be left 0 (zero).
#
# Note: A <block size> of 0 (zero) implies variable length blocking.
#
# Those not specified will inherit "NULL" values.
# Entries may be specified in any order....
#
# ansi density code name bpi block size
# ----------------- ---- --- ----------
scsi_tape_density[0x00] = "default" 0 0
scsi_tape_density[0x01] = "800r_bpi" 800 0
scsi_tape_density[0x02] = "1600r_bpi" 1600 0
scsi_tape_density[0x03] = "6250r_bpi" 6250 0
scsi_tape_density[0x04] = "8000c_bpi" 8000 0
scsi_tape_density[0x05] = "8000r_bpi" 8000 0
scsi_tape_density[0x06] = "3200r_bpi" 3200 0
scsi_tape_density[0x07] = "6400c_bpi" 6400 0
scsi_tape_density[0x08] = "8000cs_bpi" 8000 0
scsi_tape_density[0x09] = "38000c_bpi" 38000 0
scsi_tape_density[0x0a] = "6666c_bpi" 6666 0
scsi_tape_density[0x0b] = "1600c_bpi" 1600 0
scsi_tape_density[0x0c] = "12690c_bpi" 12690 0
scsi_tape_density[0x0d] = "qic120_ecc" 10000 512
scsi_tape_density[0x0e] = "qic150_ecc" 10000 512
scsi_tape_density[0x0f] = "qic120" 10000 512
scsi_tape_density[0x10] = "qic150" 10000 512
scsi_tape_density[0x11] = "qic320" 16000 0
scsi_tape_density[0x12] = "qic1350" 0 0
scsi_tape_density[0x13] = "61000_bpi" 61000 0
scsi_tape_density[0x14] = "54000_bpi" 54000 0
scsi_tape_density[0x15] = "45434_bpi" 45434 0
scsi_tape_density[0x16] = "10000_bpi" 10000 0
scsi_tape_density[0x17] = "42500_bpi" 42500 0
scsi_tape_density[0x18] = "42500_bpi" 42500 0
scsi_tape_density[0x19] = "62500_bpi" 62500 0
scsi_tape_density[0x1a] = "81630_bpi" 81630 0
scsi_tape_density[0x1b] = "85700_bpi" 85700 0
scsi_tape_density[0x1c] = "42000_bpi" 42000 0
scsi_tape_density[0x1d] = "38400_bpi" 38400 0
scsi_tape_density[0x1e] = "36000_bpi" 36000 0
scsi_tape_density[0x1f] = "67733_bpi" 67733 0
scsi_tape_density[0x20] = "67733_bpi" 67733 0
scsi_tape_density[0x21] = "67733_bpi" 67733 0
scsi_tape_density[0x22] = "40640_bpi" 40640 0
scsi_tape_density[0x23] = "67733_bpi" 67733 0
scsi_tape_density[0x24] = "61000_bpi" 61000 0
scsi_tape_density[0x25] = "97000_bpi" 97000 0
scsi_tape_density[0x26] = "97000_bpi" 97000 0
scsi_tape_density[0x27] = "77611_bpi" 77611 0
scsi_tape_density[0x28] = "37871_bpi" 37871 0
scsi_tape_density[0x29] = "density_code_29" 0 0
scsi_tape_density[0x2a] = "density_code_2A" 0 0
scsi_tape_density[0x2b] = "density_code_2B" 0 0
scsi_tape_density[0x2c] = "density_code_2C" 0 0
scsi_tape_density[0x2d] = "density_code_2D" 0 0
scsi_tape_density[0x2e] = "density_code_2E" 0 0
scsi_tape_density[0x2f] = "density_code_2F" 0 0
scsi_tape_density[0x30] = "116000_bpi" 116000 0
scsi_tape_density[0x31] = "167000_bpi" 167000 0
scsi_tape_density[0x32] = "density_code_32" 0 0
scsi_tape_density[0x33] = "density_code_33" 0 0
scsi_tape_density[0x34] = "density_code_34" 0 0
scsi_tape_density[0x35] = "density_code_35" 0 0
scsi_tape_density[0x36] = "density_code_36" 0 0
scsi_tape_density[0x37] = "density_code_37" 0 0
scsi_tape_density[0x38] = "density_code_38" 0 0
scsi_tape_density[0x39] = "density_code_39" 0 0
scsi_tape_density[0x3a] = "density_code_3a" 0 0
scsi_tape_density[0x3b] = "density_code_3b" 0 0
scsi_tape_density[0x3c] = "density_code_3c" 0 0
scsi_tape_density[0x3d] = "density_code_3d" 0 0
scsi_tape_density[0x3e] = "density_code_3e" 0 0
scsi_tape_density[0x3f] = "density_code_3f" 0 0
scsi_tape_density[0x40] = "density_code_40" 0 0
scsi_tape_density[0x41] = "98250_bpi" 98250 0
SCSIDEVICE
#
Type = disk
Name = "DEC" "RZ1CF-CF"
#
ATTRIBUTE:
AttributeName = "DSBLflags"
Length = 4
ubyte[0] = 1
SCSIDEVICE
#
Type = disk
Name = "DEC" "RZ1DF-CF"
#
ATTRIBUTE:
AttributeName = "DSBLflags"
Length = 4
ubyte[0] = 1
SCSIDEVICE
#
Type = disk
Name = "DEC" "RZ55"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
#
Type = disk
Name = "DEC" "RZ56"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
#
Type = disk
Name = "DEC" "RZ57"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
Type = disk
Name = "DEC" "RZ58"
#
PARAMETERS:
TaggedQueuing = disabled
ReadyTimeSeconds = 60
SCSIDEVICE
Type = disk
Name = "DEC" "RZ73"
#
PARAMETERS:
TagQueueDepth = 74
SCSIDEVICE
#
# Matches everyone in the HSGx family
#
Type = disk
Name = "DEC" "HSG"
#
PARAMETERS:
TypeSubClass = hard_disk, raid
BlockSize = 0
BadBlockRecovery = disabled
DynamicGeometry = true
DisperseQueue = true
LongTimeoutRetry = enabled
ReadyTimeSeconds = 90
TagQueueDepth = 25
RequestSenseLength = 255
PwrMgmt_Capable = false
SCSIDEVICE
#
# Matches everyone in the HSZx family
#
Type = disk
Name = "DEC" "HSZ"
#
PARAMETERS:
TypeSubClass = hard_disk, raid
BlockSize = 0
BadBlockRecovery = disabled
DynamicGeometry = true
DisperseQueue = true
LongTimeoutRetry = enabled
ReadyTimeSeconds = 90
TagQueueDepth = 74
RequestSenseLength = 160
PwrMgmt_Capable = false
SCSIDEVICE
#
Type = disk
Name = "DEC" "HSZ10"
#
PARAMETERS:
BlockSize = 0x84032b
CMD_WriteVerify = supported
TagQueueDepth = 64
LongTimeoutRetry = disabled
SCSIDEVICE
#
Type = disk
Name = "DEC" "HSZ15"
#
PARAMETERS:
BlockSize = 0x82032b
CMD_WriteVerify = supported
TagQueueDepth = 64
LongTimeoutRetry = disabled
SCSIDEVICE
#
Type = disk
Name = "DEC" "HSZ22"
#
PARAMETERS:
TagQueueDepth = 32
LongTimeoutRetry = disabled
SCSIDEVICE
#
Type = disk
Name = "DEC" "RWZ01"
#
PARAMETERS:
CMD_PreventAllow = supported
TagQueueDepth = 8
SCSIDEVICE
#
Type = disk
Name = "DEC" "RZ23"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
#
# NOTE: Inherits values from RZ23
#
Type = disk
Name = "DEC" "RZ23L"
#
PARAMETERS:
SyncTransfers = disabled
SCSIDEVICE
#
Type = disk
Name = "DEC" "RZ22"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
#
Type = disk
Name = "DEC" "RX23"
#
PARAMETERS:
TypeSubClass = floppy_3.5
BadBlockRecovery = disabled
DynamicGeometry = true
CmdReordering = disabled
TagQueueDepth = 0
SCSIDEVICE
#
# Matches RZ24 and RZ24L
#
Type = disk
Name = "DEC" "RZ24"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
#
# Matches RZ25, RZ25F, RZ25L and RZ25M
#
Type = disk
Name = "DEC" "RZ25"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
#
# NOTE: Inherits values from RZ25
#
Type = disk
Name = "DEC" "RZ25L"
#
PARAMETERS:
TagQueueDepth = 64
SCSIDEVICE
#
# NOTE: Inherits values from RZ25 and RZ25L
#
Type = disk
Name = "DEC" "RZ25L" "006"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
#
# NOTE: Inherits values from RZ25 and RZ25L
#
Type = disk
Name = "DEC" "RZ25L" "007"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
#
# NOTE: Inherits values from RZ25
#
Type = disk
Name = "DEC" "RZ25M"
#
PARAMETERS:
TagQueueDepth = 36
SCSIDEVICE
#
# Matches RZ26, RZ26B, RZ26F, RZ26J, RZ26L, RZ26M, RZ26N
#
Type = disk
Name = "DEC" "RZ26"
#
PARAMETERS:
TagQueueDepth = 74
SCSIDEVICE
#
# NOTE: Inherits values from RZ26
#
Type = disk
Name = "DEC" "RZ26F"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
#
# NOTE: Inherits values from RZ26
#
Type = disk
Name = "DEC" "RZ26J"
#
PARAMETERS:
TagQueueDepth = 38
SCSIDEVICE
#
# Matches RZ26L Rev 440C firmware
#
Type = disk
Name = "DEC" "RZ26L" "440C"
#
PARAMETERS:
PwrMgmt_Capable = false
SCSIDEVICE
#
# NOTE: Inherits values from RZ26
#
Type = disk
Name = "DEC" "RZ26M"
#
PARAMETERS:
TagQueueDepth = 30
SCSIDEVICE
#
# NOTE: Inherits values from RZ26
#
Type = disk
Name = "DEC" "RZ26N"
#
PARAMETERS:
TagQueueDepth = 30
SCSIDEVICE
#
Type = disk
Name = "DEC" "RZ27"
#
PARAMETERS:
TagQueueDepth = 74
SCSIDEVICE
#
# Matches RZ28, RZ28B, RZ28D, RZ28J, RZ28L, RZ28M
#
Type = disk
Name = "DEC" "RZ28"
#
PARAMETERS:
TagQueueDepth = 74
SCSIDEVICE
#
# Matches RZ28 Rev 441C firmware
#
Type = disk
Name = "DEC" "RZ28" "441C"
#
PARAMETERS:
PwrMgmt_Capable = false
SCSIDEVICE
#
# Matches RZ28 Rev D41C firmware
#
Type = disk
Name = "DEC" "RZ28" "D41C"
#
PARAMETERS:
PwrMgmt_Capable = false
SCSIDEVICE
#
# NOTE: Inherits values from RZ28
#
Type = disk
Name = "DEC" "RZ28B"
#
PARAMETERS:
TagQueueDepth = 64
SCSIDEVICE
#
# NOTE: Inherits values from RZ28 and RZ28B
#
Type = disk
Name = "DEC" "RZ28B" "0003"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
#
# NOTE: Inherits values from RZ28
#
Type = disk
Name = "DEC" "RZ28D"
#
PARAMETERS:
TagQueueDepth = 64
SCSIDEVICE
#
# NOTE: Inherits values from RZ28
#
Type = disk
Name = "DEC" "RZ28J"
#
PARAMETERS:
TagQueueDepth = 38
SCSIDEVICE
#
# NOTE: Inherits values from RZ28
#
Type = disk
Name = "DEC" "RZ28L"
#
PARAMETERS:
TagQueueDepth = 38
SCSIDEVICE
#
# NOTE: Inherits values from RZ28
#
Type = disk
Name = "DEC" "RZ28M"
#
PARAMETERS:
TagQueueDepth = 38
SCSIDEVICE
#
# Matches RZ29, RZ29B, RZ29L, RZ29M
#
Type = disk
Name = "DEC" "RZ29"
#
PARAMETERS:
TagQueueDepth = 38
SCSIDEVICE
#
# NOTE: Inherits values from RZ29
#
Type = disk
Name = "DEC" "RZ29B"
#
PARAMETERS:
TagQueueDepth = 64
SCSIDEVICE
#
Type = disk
Name = "DEC" "RZ74"
#
PARAMETERS:
TagQueueDepth = 74
SCSIDEVICE
#
Type = disk
Name = "DEC" "RZ59"
#
PARAMETERS:
TagQueueDepth = 64
SCSIDEVICE
#
Type = disk
Name = "DEC" "RZ35"
#
PARAMETERS:
TaggedQueuing = disabled
TagQueueDepth = 74
SCSIDEVICE
#
Type = disk
Name = "IBM" "0661467"
#
PARAMETERS:
TagQueueDepth = 0
SCSIDEVICE
#
# Entry for the SCSI Iomega ZIP (DEC RX25) drives
#
Type = disk
Name = "IOMEGA" "ZIP"
#
PARAMETERS:
TypeSubClass = floppy_3.5
DynamicGeometry = true
TagQueueDepth = 0
CMD_PreventAllow = supported
SCSIDEVICE
#
# Entry for the IDE/ATAPI Iomega ZIP drives
#
Type = disk
Stype = 1
Name = "IOMEGA" "ZIP"
#
PARAMETERS:
TypeSubClass = floppy_3.5
DynamicGeometry = true
TagQueueDepth = 0
CMD_PreventAllow = supported
SCSIDEVICE
#
Type = disk
Name = "DEC" "RX26"
#
PARAMETERS:
TypeSubClass = floppy_3.5
BadBlockRecovery = disabled
DynamicGeometry = true
CmdReordering = disabled
TagQueueDepth = 0
SCSIDEVICE
#
Type = disk
Name = "DEC" "RX33"
#
PARAMETERS:
TypeSubClass = floppy_5.25
BadBlockRecovery = disabled
DynamicGeometry = true
CmdReordering = disabled
TagQueueDepth = 0
SCSIDEVICE
#
# Matches all members of the "EZxxx" family
#
Type = disk
Name = "DEC" "EZ"
#
PARAMETERS:
TagQueueDepth = 4
ReadyTimeSeconds = 120
SCSIDEVICE
#
# Matches EZ51, EZ54, EZ58
# NOTE: Inherits values from EZ
#
Type = disk
Name = "DEC" "EZ5"
#
PARAMETERS:
TagQueueDepth = 74
SCSIDEVICE
#
# Entry for the Maxtor 131Mb PCMCIA ATA card. This device has
# broken firmware that swaps the 2 size fields (making it look
# like it has over 9,000 Gbytes). So, set the ddr flag so the
# driver can swap the fields back into standard alignment so it
# will work without self destructing (by smashing it's heads into
# it's center spindle).
#
Type = disk
Stype = 1
Name = "Maxtor M" "XL-131-III PCMCI"
#
ATTRIBUTE:
AttributeName = "IDEflags"
Length = 4
ubyte[0] = 1
SCSIDEVICE
#
Type = tape
Name = "DEC" "TZK50"
#
PARAMETERS:
TypeSubClass = tk
MaxTransferSize = 64512
SyncTransfers = disabled
TagQueueDepth = 0
ReadyTimeSeconds = 45 # seconds
# Use "default" tape densities
SCSIDEVICE
#
Type = tape
Name = "DEC" "TZ30"
#
PARAMETERS:
TypeSubClass = tk
MaxTransferSize = 64512
SyncTransfers = disabled
TagQueueDepth = 0
ReadyTimeSeconds = 45 # seconds
# Use "default" tape densities
ATTRIBUTE:
AttributeName = "BDRatBoot"
Length = 1
ubyte[0] = 1
SCSIDEVICE
#
Type = tape
Name = "DEC" "TLZ04"
#
PARAMETERS:
TypeSubClass = rdat
SyncTransfers = disabled
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0,1,2,3,4,5,6,7
DensityCode = 61000_bpi
Buffered = 0x1
ATTRIBUTE:
AttributeName = "BDRatBoot"
Length = 1
ubyte[0] = 1
SCSIDEVICE
#
Type = tape
Name = "DEC" "TLZ06"
#
PARAMETERS:
TypeSubClass = rdat
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = 61000_bpi
CompressionCode = 0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = 61000_bpi
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
Type = tape
Name = "DEC" "TLZ6"
#
PARAMETERS:
TypeSubClass = rdat, loader
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = 61000_bpi
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = 61000_bpi
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
Type = tape
Name = "DEC" "TLZ07"
#
PARAMETERS:
TypeSubClass = rdat
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
Type = tape
Name = "DEC" "TLZ7"
#
PARAMETERS:
TypeSubClass = rdat, loader
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
Type = tape
Name = "DEC" "TLZ09"
#
PARAMETERS:
TypeSubClass = rdat
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 90 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
Type = tape
Name = "DEC" "TLZ9"
#
PARAMETERS:
TypeSubClass = rdat, loader
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 90 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# Matches TLZ10, TLZ1
#
Type = tape
Name = "DEC" "TLZ1"
#
PARAMETERS:
TypeSubClass = rdat, loader
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 90 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# NOTE: Inherits info from TLZ1
#
Type = tape
Name = "DEC" "TLZ10"
#
PARAMETERS:
TypeSubClass = rdat
# use TLZ1 densities
SCSIDEVICE
#
Type = tape
Name = "NCR H621"
#
PARAMETERS:
TypeSubClass = 9trk
SyncTransfers = disabled
MaxTransferSize = 65536
TagQueueDepth = 0
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0,1,2,3,4,5,6,7
DensityCode = 1600r_bpi
Buffered = 0x1
SCSIDEVICE
#
Type = tape
Name = "DEC" "TSZ07"
#
PARAMETERS:
TypeSubClass = 9trk
MaxTransferSize = 65536
TagQueueDepth = 0
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0,2
DensityCode = 1600r_bpi
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,3,4,5,6,7
DensityCode = 6250r_bpi
Buffered = 0x1
SCSIDEVICE
#
Type = tape
Name = "CIPHER" "M995"
#
PARAMETERS:
TypeSubClass = 9trk
MaxTransferSize = 65536
TagQueueDepth = 0
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0,2
DensityCode = 1600r_bpi
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,3,4,5,6,7
DensityCode = 6250r_bpi
Buffered = 0x1
SCSIDEVICE
#
Type = tape
Name = "DEC" "TZK10"
#
PARAMETERS:
TypeSubClass = qic
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0
OneFilemarkOnClose = yes
DensityCode = qic120
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 1,7
OneFilemarkOnClose = yes
DensityCode = qic320
Buffered = 0x1
DENSITY:
#
DensityNumber = 2,4
OneFilemarkOnClose = yes
DensityCode = qic150
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 3
OneFilemarkOnClose = yes
DensityCode = default
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 5,6
OneFilemarkOnClose = yes
DensityCode = qic320
Buffered = 0x1
Blocking = 1024
SCSIDEVICE
#
Type = tape
Name = "DEC" "TZK11"
#
PARAMETERS:
TypeSubClass = qic
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0
OneFilemarkOnClose = yes
DensityCode = qic120
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 1
DensityCode = default
Buffered = 0x1
DENSITY:
#
DensityNumber = 2
OneFilemarkOnClose = yes
DensityCode = qic150
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 3,4
OneFilemarkOnClose = yes
DensityCode = default
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 5,6
OneFilemarkOnClose = yes
DensityCode = default
Buffered = 0x1
Blocking = 1024
DENSITY:
#
DensityNumber = 7
OneFilemarkOnClose = yes
DensityCode = default
Buffered = 0x1
SCSIDEVICE
#
Type = tape
Name = "DEC" "TZK20"
#
PARAMETERS:
TypeSubClass = qic
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
# use the "default" densities
SCSIDEVICE
#
Type = tape
Name = "DEC" "TZK13"
#
PARAMETERS:
TypeSubClass = qic
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0,2,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# Matches TKZ60, TKZ60L, TKZ60C, TKZ60CL
#
Type = tape
Name = "DEC" "TKZ60"
#
PARAMETERS:
TypeSubClass = 3480
MaxTransferSize = 65536
TagQueueDepth = 0
ReadyTimeSeconds = 45 # seconds
# use the "default" densities
SCSIDEVICE
#
# NOTE: Inherits info from TKZ60
#
Type = tape
Name = "DEC" "TKZ60L"
#
PARAMETERS:
TypeSubClass = 3480, loader
# use the "default" densities
SCSIDEVICE
#
# Matches TKZ60C and TKZ60CL
# NOTE: Inherits info from TKZ60
#
Type = tape
Name = "DEC" "TKZ60C"
#
PARAMETERS:
TypeSubClass = 3480
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# NOTE: Inherits info from TKZ60 and TKZ60C
#
Type = tape
Name = "DEC" "TKZ60CL"
#
PARAMETERS:
TypeSubClass = 3480, loader
# use TKZ60C densities
SCSIDEVICE
#
# TKZ62CL Tape drive ddr entry
#
Type = tape
Name = "DEC" "TKZ62CL"
#
PARAMETERS:
#
TypeSubClass = 3480, loader
MaxTransferSize = 0x10000 #64k
SyncTransfers = enabled
WideTransfers = disabled
Disconnects = enabled
CmdReordering = disabled
TaggedQueuing = disabled
TagQueueDepth = 0
WCE_Capable = false
PwrMgmt_Capable = false
LongTimeoutRetry = disabled
ReadyTimeSeconds = 240
DisperseQueue = false
DENSITY:
DensityNumber = 0 # rmt*l
Buffered = 0x1
DensityCode = 0x09
CompressionCode = 0x0
DENSITY:
DensityNumber = 1,2 # rmt*m, rmt*h
Buffered = 0x1
DensityCode = 0x28
CompressionCode = 0x1
DENSITY:
DensityNumber = 3 # rmt*a
Buffered = 0x1
DensityCode = default
CompressionCode = 0x1
SCSIDEVICE
#
# Matches all TZ8XXX devices
#
Type = tape
Name = "DEC" "TZ8"
#
PARAMETERS:
RequestSenseLength = 72
SCSIDEVICE
#
# Matches TZ85 and TZ857
#
Type = tape
Name = "DEC" "TZ85"
#
PARAMETERS:
TypeSubClass = tk
MaxTransferSize = 262144
TagQueueDepth = 0
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0,1,2,3,4,5,6,7
DensityCode = 42500_bpi
Buffered = 0x1
SCSIDEVICE
#
# NOTE: Inherits info from TZ85
#
Type = tape
Name = "DEC" "TZ857"
#
PARAMETERS:
TypeSubClass = tk, loader
# use TZ85 densities
SCSIDEVICE
#
# Matches TZ86 and TZ867
#
Type = tape
Name = "DEC" "TZ86"
#
PARAMETERS:
TypeSubClass = tk
MaxTransferSize = 262144
TagQueueDepth = 0
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0,3
DensityCode = 42500_bpi
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2,4,5,6,7
DensityCode = 0x18
Buffered = 0x1
SCSIDEVICE
#
# NOTE: Inherits info from TZ86
#
Type = tape
Name = "DEC" "TZ867"
#
PARAMETERS:
TypeSubClass = tk, loader
# use TZ86 densities
SCSIDEVICE
#
# Matches TZ87 and TZ877
#
Type = tape
Name = "DEC" "TZ87"
#
PARAMETERS:
TypeSubClass = tk
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0
DensityCode = 0x18
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1
DensityCode = 62500_bpi
CompressionCode = 0x1
Buffered = 0x1
DENSITY:
#
DensityNumber = 2,4,5,6,7
DensityCode = 62500_bpi
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 3
DensityCode = 42500_bpi
CompressionCode = 0x0
Buffered = 0x1
SCSIDEVICE
#
# NOTE: Inherits info from TZ87
#
Type = tape
Name = "DEC" "TZ877"
#
PARAMETERS:
TypeSubClass = tk, loader
# use TZ87 densities
SCSIDEVICE
#
# Matches TZ88, TZ885, TZ887
#
Type = tape
Name = "DEC" "TZ88"
#
PARAMETERS:
TypeSubClass = tk
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0
DensityCode = 0x18
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
DENSITY:
#
DensityNumber = 2,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 3
DensityCode = 42500_bpi
CompressionCode = 0x0
Buffered = 0x1
SCSIDEVICE
#
# NOTE: Inherits info from TZ88
#
Type = tape
Name = "DEC" "TZ885"
#
PARAMETERS:
TypeSubClass = tk, loader
# use TZ88 densities
SCSIDEVICE
#
# NOTE: Inherits info from TZ88
#
Type = tape
Name = "DEC" "TZ887"
#
PARAMETERS:
TypeSubClass = tk, loader
# use TZ88 densities
SCSIDEVICE
#
# Matches TZ89
#
#
Type = tape
Name = "DEC" "TZ89"
#
PARAMETERS:
TypeSubClass = tk
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # 120 seconds for TZ89s
DENSITY:
#
DensityNumber = 0
DensityCode = 0x1a
CompressionCode = 0x1
Buffered = 0x1
DENSITY:
#
DensityNumber = 1
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
DENSITY:
#
DensityNumber = 2,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 3
DensityCode = 0x1a
CompressionCode = 0x0
Buffered = 0x1
SCSIDEVICE
#
# Matches DLT4000
#
Type = tape
Name = "COMPAQ" "DLT4000"
#
PARAMETERS:
TypeSubClass = tk
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # seconds
DENSITY:
#
DensityNumber = 0
DensityCode = 0x18
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
DENSITY:
#
DensityNumber = 2,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 3
DensityCode = 42500_bpi
CompressionCode = 0x0
Buffered = 0x1
SCSIDEVICE
#
# Matches DLT8000
#
#
Type = tape
Name = "COMPAQ" "DLT8000"
#
PARAMETERS:
TypeSubClass = tk
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # seconds
DENSITY:
#
DensityNumber = 0
DensityCode = 0x1b
CompressionCode = 0x1
Buffered = 0x1
DENSITY:
#
DensityNumber = 1
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
DENSITY:
#
DensityNumber = 2,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 3
DensityCode = 0x1b
CompressionCode = 0x0
Buffered = 0x1
SCSIDEVICE
#
# Matches SDT-7000
#
#
Type = tape
Name = "COMPAQ" "SDT-7000"
#
PARAMETERS:
TypeSubClass = rdat
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# Matches SDT-9000
#
#
Type = tape
Name = "COMPAQ" "SDT-9000"
#
PARAMETERS:
TypeSubClass = rdat
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# Matches SDT-10000
#
#
Type = tape
Name = "COMPAQ" "SDT-10000"
#
PARAMETERS:
TypeSubClass = rdat
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# Matches TSL-10000
#
#
Type = tape
Name = "COMPAQ" "TSL-10000"
#
PARAMETERS:
TypeSubClass = rdat, loader
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# Matches TSL-9000
#
#
Type = tape
Name = "COMPAQ" "TSL-9000"
#
PARAMETERS:
TypeSubClass = rdat, loader
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# Matches SDX-500C
#
#
Type = tape
Name = "COMPAQ" "SDX-500C"
#
PARAMETERS:
TypeSubClass = 8mm
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# Matches SDX-300C
#
#
Type = tape
Name = "COMPAQ" "SDX-300C"
#
PARAMETERS:
TypeSubClass = 8mm
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# Matches C5683A
#
#
Type = tape
Name = "COMPAQ" "C5683A"
#
PARAMETERS:
TypeSubClass = rdat
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# Matches C5713A
#
#
Type = tape
Name = "COMPAQ" "C5713A"
#
PARAMETERS:
TypeSubClass = rdat, loader
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 120 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
Type = tape
Name = "TANDBERG" " TDC 3800"
#
PARAMETERS:
TypeSubClass = qic
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0
OneFilemarkOnClose = yes
DensityCode = qic120
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 1,7
OneFilemarkOnClose = yes
DensityCode = qic320
Buffered = 0x1
DENSITY:
#
DensityNumber = 2,4
OneFilemarkOnClose = yes
DensityCode = qic150
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 3
OneFilemarkOnClose = yes
DensityCode = default
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 5,6
OneFilemarkOnClose = yes
DensityCode = qic320
Buffered = 0x1
Blocking = 1024
SCSIDEVICE
#
Type = tape
Name = "ARCHIVE" "VIPER"
#
PARAMETERS:
TypeSubClass = qic
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
DENSITY:
#
DensityNumber = 0
OneFilemarkOnClose = yes
DensityCode = qic120
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 1
OneFilemarkOnClose = yes
DensityCode = qic320
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 2
OneFilemarkOnClose = yes
DensityCode = qic150
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 3
OneFilemarkOnClose = yes
DensityCode = 8000r_bpi
Buffered = 0x1
Blocking = 512
DENSITY:
#
DensityNumber = 4,5,6,7
OneFilemarkOnClose = yes
DensityCode = qic320
Buffered = 0x1
SCSIDEVICE
#
Type = tape
Name = "EXABYTE" "EXB-8200"
#
PARAMETERS:
TypeSubClass = 8mm
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 45 # seconds
# use the "default" densities
MODESELECT:
ModeSelectNumber = 0
SavePage = No
PageFormat = scsi1
BlockDescriptor = yes
TransferLength = 17
# set non-zero values in mode data
Hdr.Tape.BufferMode = 0x1
Data.UBYTE[0] = 0x06 # Page Code 0x06 - SCSI1 vendor unique
Data.UBYTE[1] = 0x00
Data.UBYTE[2] = 0x80
Data.UBYTE[3] = 0x80
Data.UBYTE[4] = 0x07
SCSIDEVICE
#
Type = tape
Name = "DEC" "TKZ09"
#
PARAMETERS:
TypeSubClass = 8mm
MaxTransferSize = 0x3c000
ReadyTimeSeconds = 240
TagQueueDepth = 0
DENSITY:
#
DensityNumber = 0,3
DensityCode = 54000_bpi
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2,4,5,6,7
DensityCode = 45434_bpi
Buffered = 0x1
MODESELECT:
ModeSelectNumber = 0
SavePage = No
PageFormat = scsi2
BlockDescriptor = yes
TransferLength = 18
# set non-zero values in mode data
Hdr.Tape.BufferMode = 0x1
Data.UBYTE[0] = 0x20 # Page Code 0x20
Data.UBYTE[1] = 0x04 # Page Length = 4
Data.UBYTE[2] = 0x06
Data.UBYTE[3] = 0x00
Data.UBYTE[4] = 0x80
Data.UBYTE[5] = 0x07
SCSIDEVICE
#
# TKZ9E Tape Drive ddr entry
#
#
# TKZ9EA (Exabyte 8505 XL)
#
Type = tape
Name = "EXABYTE" "85058SQANXR1" "07J0"
#
PARAMETERS:
TypeSubClass = 8mm
MaxTransferSize = 0x3c000
SyncTransfers = enabled
WideTransfers = disabled
Disconnects = enabled
CmdReordering = disabled
Cmd_PreventAllow = Supported
TaggedQueuing = enabled
TagQueueDepth = 0
WCE_Capable = false
PwrMgmt_Capable = false
LongTimeoutRetry = disabled
ReadyTimeSeconds = 90
DisperseQueue = false
InquiryLength = 36
MODESELECT:
ModeSelectNumber = 0
SavePage = No
PageFormat = SCSI2
BlockDescriptor = Yes
TransferLength = 18
Hdr.Tape.BufferMode = 1
Data.UBYTE[0] = 0x20 # page Code 0x20
Data.UBYTE[1] = 0x04 # Page Length = 4
Data.UBYTE[2] = 0x06
Data.UBYTE[3] = 0x00
Data.UBYTE[4] = 0x80
Data.UBYTE[5] = 0x07
DENSITY:
DensityNumber = 0,3 # rmt*l, rmt*a
DensityCode = 54000_bpi # 8200 uncompressed
Buffered = 0x1
DENSITY:
DensityNumber = 1 # rmt*m, rmt*h
DensityCode = 45434_bpi # 8500 uncompressed
Buffered = 0x1
DENSITY:
DensityNumber = 2 # rmt*h
DensityCode = default # 8500c compressed
Buffered = 0x1
SCSIDEVICE
#
# Matches TZS20, TZS2
#
Type = tape
Name = "DEC" "TZS2"
#
PARAMETERS:
TypeSubClass = 8mm, loader
TagQueueDepth = 0
MaxTransferSize = 0x0ffffff # (16MB - 1)
ReadyTimeSeconds = 90 # seconds
DENSITY:
#
DensityNumber = 0,3,4,5,6,7
DensityCode = default
CompressionCode = 0x0
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2
DensityCode = default
CompressionCode = 0x1
Buffered = 0x1
SCSIDEVICE
#
# NOTE: Inherits info from TZS2
#
Type = tape
Name = "DEC" "TZS20"
#
#
PARAMETERS:
TypeSubClass = 8mm
# use TZS2 densities
SCSIDEVICE
#
Type = tape
Name = "EXABYTE" "EXB-8500"
#
PARAMETERS:
TypeSubClass = 8mm
MaxTransferSize = 0x3c000
ReadyTimeSeconds = 240
TagQueueDepth = 0
DENSITY:
#
DensityNumber = 0,3
DensityCode = 54000_bpi
Buffered = 0x1
DENSITY:
#
DensityNumber = 1,2,4,5,6,7
DensityCode = 45434_bpi
Buffered = 0x1
MODESELECT:
ModeSelectNumber = 0
SavePage = No
PageFormat = scsi2 # 0x02 ??
BlockDescriptor = yes
TransferLength = 18
# set non-zero values in mode data
Hdr.Tape.BufferMode = 0x1
Data.UBYTE[0] = 0x20 # Page Code 0x20
Data.UBYTE[1] = 0x04 # Page Length = 4
Data.UBYTE[2] = 0x06
Data.UBYTE[3] = 0x00
Data.UBYTE[4] = 0x80
Data.UBYTE[5] = 0x07
SCSIDEVICE
#
# TKZ15 Tape Drive ddr entry
#
Type = tape
Name = "EXABYTE" "85058SQANXR1" "05B0"
#
PARAMETERS:
TypeSubClass = 8mm
MaxTransferSize = 0x3c000
SyncTransfers = enabled
WideTransfers = disabled
Disconnects = enabled
CmdReordering = disabled
TaggedQueuing = enabled
TagQueueDepth = 0
PwrMgmt_Capable = false
LongTimeoutRetry = disabled
ReadyTimeSeconds = 90
DisperseQueue = false
InquiryLength = 36
MODESELECT:
ModeSelectNumber = 0
SavePage = No
PageFormat = SCSI2
BlockDescriptor = Yes
TransferLength = 18
Hdr.Tape.BufferMode = 1
Data.UBYTE[0] = 0x20 # page Code 0x20
Data.UBYTE[1] = 0x04 # Page Length = 4
Data.UBYTE[2] = 0x06
Data.UBYTE[3] = 0x00
Data.UBYTE[4] = 0x80
Data.UBYTE[5] = 0x07
DENSITY:
DensityNumber = 0,3
DensityCode = 54000_bpi
Buffered = 0x1
DENSITY:
DensityNumber = 1,2
DensityCode = 45434_bpi
Buffered = 0x1
SCSIDEVICE
#
# Matches all members of the "RRDxxx" family
#
Type = rodirect
Name = "DEC" "RRD"
#
PARAMETERS:
ReadyTimeSeconds = 45
TagQueueDepth = 0
SCSIDEVICE
#
# This is the default for the ATAPI CDrom devices
#
Type = rodirect
Stype = 1
Name = "*"
#
PARAMETERS:
ReadyTimeSeconds = 45
TagQueueDepth = 0
SCSIDEVICE
#
Type = rodirect
Name = "DEC" "RRD40"
#
PARAMETERS:
SyncTransfers = disabled
CMD_PreventAllow = notsupported
SCSIDEVICE
#
Type = rodirect
Name = "DEC" "RRD42"
#
PARAMETERS:
SyncTransfers = disabled
SCSIDEVICE
#
Type = rodirect
Name = "DEC" "RRD43"
#
MODESELECT:
# Set density for CD/XA format discs (like Kodak PhotoCD).
# Note that these drives only support this format
# when set to a block size of 2048 bytes.
ModeSelectNumber = 0
PageFormat = scsi2
SavePage = No
TransferLength = 12
BlockDescriptor = Yes
BlkDescr.Density = 0x83
BlkDescr.BlockLength = 2048
SCSIDEVICE
#
Type = rodirect
Name = "DEC" "RRD44"
#
MODESELECT:
# Set density for CD/XA format discs (like Kodak PhotoCD).
# Note that these drives only support this format
# when set to a block size of 2048 bytes.
ModeSelectNumber = 0
PageFormat = scsi2
SavePage = No
TransferLength = 12
BlockDescriptor = Yes
BlkDescr.Density = 0x83
BlkDescr.BlockLength = 2048
SCSIDEVICE
#
Type = rodirect
Name = "SONY" "CD-ROM"
#
PARAMETERS:
ReadyTimeSeconds = 45
TagQueueDepth = 0
#
MODESELECT:
# The "default" cdrom leaves the blocksize at the H/Ws default.
# So, force a mode select for Mode Select Number 0.
# We do this since the SONY CDroms can operate in 512 byte mode.
ModeSelectNumber = 0
SavePage = No
PageFormat = scsi1
TransferLength = 12
BlockDescriptor = yes
BlkDescr.BlockLength = 512
SCSIDEVICE
#
# Generic entry for cdroms behind an HSZxx
#
Type = rodirect
Name = "DEC" "HSZ"
#
PARAMETERS:
LongTimeoutRetry = enabled
ReadyTimeSeconds = 90
TagQueueDepth = 74
RequestSenseLength = 160
PwrMgmt_Capable = false
SCSIDEVICE
#
Type = rodirect
Name = "DEC" "RRD45"
#
MODESELECT:
# Set density code for CD/XA format discs (like Kodak PhotoCD).
ModeSelectNumber = 0
PageFormat = scsi2
SavePage = No
TransferLength = 12
BlockDescriptor = Yes
BlkDescr.Density = 0x83
BlkDescr.BlockLength = 512
SCSIDEVICE
#
Type = rodirect
Name = "DEC" "RRD46"
#
MODESELECT:
# Set density code for CD/XA format discs (like Kodak PhotoCD).
ModeSelectNumber = 0
PageFormat = scsi2
SavePage = No
TransferLength = 12
BlockDescriptor = Yes
BlkDescr.Density = 0x83
BlkDescr.BlockLength = 512
SCSIDEVICE
# Generic entry for Toshiba drives and RRD43,44,45,& 46 drives
# without DEC jumper inserted.
Type = rodirect
Name = "TOSHIBA" "CD-ROM XM"
#
PARAMETERS:
ReadyTimeSeconds = 45
#
MODESELECT:
# Set density code for CD/XA format discs (like Kodak PhotoCD).
ModeSelectNumber = 0
PageFormat = scsi2
SavePage = No
TransferLength = 12
BlockDescriptor = Yes
BlkDescr.Density = 0x83
BlkDescr.BlockLength = 2048
SCSIDEVICE
#
Type = rodirect
# Panasonic KXL-D720 portable CDROM drive
# These drives incorrectly respond as having all 8 LUNs present.
Name = "MATSHITA" "KME CD-ROM01"
#
PARAMETERS:
CMD_PreventAllow = notsupported
WideTransfers = disabled
SCSIDEVICE
#
Type = rodirect
# Panasonic KXL-D740 portable CDROM drive
# These drives incorrectly respond as having all 8 LUNs present.
Name = "MATSHITA" "KME CD-ROM02"
#
PARAMETERS:
CMD_PreventAllow = notsupported
WideTransfers = disabled
The /etc/mcicap file is not available.
The /etc/emx.info file is not available.
SWXCR RAID controllers were not found.
KZPCC RAID controllers were not found.
Note: LSM is not being used on the system.
Compaq Computer Corporation recommends that customers with Tru64 UNIX midrange and
large servers use LSM in order to improve storage subsystem management and
availability. LSM also provides enhanced I/O statistics that
can facilitate I/O tuning.
LSM vold is not running.
Prestoserve is not being used on the system.
Operational: The root file system fstab entry fsck is incorrect.
The root file system fsck parameter must be set to 1.
Operational: The /usr file system fstab fsck entry is incorrect.
The fsck parameter must be set to more than 1.
Tuning Suggestion: Put /tmp on its own file system, instead of on the root file system.
AdvFS is installed in the running kernel.QUOTA_CONFIG:
Quotas are disabled.
The fstab file contains descriptive information about the known file systems. File systems specified in fstab are automatically mounted when the system boots.
root_domain#root / advfs rw 0 0 /proc /proc procfs rw 0 0 usr_domain#usr /usr advfs rw 0 0 /dev/rz0b swap1 ufs sw 0 2
The mount -l command shows the currently mounted filesystems:
root_domain#root on / type advfs (rw, exec, suid, dev, nosync, noquota, grpid, atimes, nodual) /proc on /proc type procfs (rw, exec, suid, dev, nosync, noquota, grpid, atimes) usr_domain#usr on /usr type advfs (rw, exec, suid, dev, nosync, noquota, grpid, atimes, nodual)
The df -ik command shows the currently mounted filesystems and the disk usage for each of those filesystems:
Filesystem 1024-blocks Used Available Capacity Iused Ifree %Iused Mounted on root_domain#root 131072 62818 58096 52% 2344 206377 1% / usr_domain#usr 5889432 1775539 4058736 31% 61460 13905132 0% /usr
Tuning Suggestion: The namei cache hit rate is low ( 69 %).
You may want to increase the size of the namei cache ( 1029 ).
You can do this by increasing the value of name-cache-size or maxusers.
Use the sysconfigdb command or the Kernel Tuner to add the following to
/etc/sysconfigtab (the value of xxx must be more than 1029 ):
vfs: name-cache-size=xxxYou must reboot the system in order to use the new value.
The namei cache hit rate is 69 %.
dbx version 3.11.10
Type 'help' for help.
stopped at [thread_block:2366 ,0xfffffc00002c53e0] Source not available
warning: Files compiled -g3: parameter values probably wrong
====== maxusers:
32
====== total_vnodes:
1338
====== nchstats:
struct {
ncs_goodhits = 33867460
ncs_neghits = 2183499
ncs_badhits = 1535320
ncs_falsehits = 865915
ncs_miss = 13075863
ncs_long = 33460
ncs_pass2 = 0
ncs_2passes = 0
ncs_dirscan = 0
ncs_cleaned_some = 393727
ncs_cleaned_none = 191966
}
====== max_vnodes:
13107
====== vnode_stats:
struct {
vn_allocations = 77031
vn_deallocations = 75693
vn_recycled = 11213724
vn_getnewcalls = 11219953
vn_getlock = 0
vn_vgetcalls = 71879032
vn_vgetfree = 15678899
vn_freecalls = 35546624
vn_failget = 0
vn_waitvxlock = 0
vn_inactivating = 0
vn_transitioning = 6
vn_faildeallocs = 2473086
rev_number = 3
}
====== nlock_record:
10000
====== flckinfo:
struct {
recmax = 2
filmax = 2
reccnt = 0
filcnt = 0
rectot = 281
filtot = 281
flckinfo_lock = struct {
sl_data = 0
sl_info = 0
sl_cpuid = 0
sl_lifms = 0
}
}
====== fifoinfo:
struct {
fifobuf = 65536
fifomax = -1
fifobsz = 8192
fifomnb = 81920000
}
====== fifo_stats:
struct {
fifo_wbolts_tot = 211
fifo_wbolts_deliv = 80
fifo_wbolts_force = 32088
fifo_rbolts_tot = 31214
fifo_rbolts_deliv = 6068
fifo_rbolts_force = 2815
fifo_found_newdata = 0
fifo_active_fifonodes = 439
}
====== fifo_do_adaptive:
1
UFS is not being used on the system.
The bufcache value is 3 %; the memory consumed is 3932 KB ( 3 MB ).
Tuning Suggestion: UFS/CDFS file systems are not being used.
You can free memory by changing the value of the vfs subsystem attribute
bufcache (currently 3) to 1%.
Use the sysconfigdb command or the Kernel Tuner to add the following to
/etc/sysconfigtab:
vfs: bufcache=1You must reboot the system in order to use the new value.
Operational: defragcron is not enabled.
Defragment should be run regularly on AdvFS domains.
Operational: The /etc/vdumpdates file is missing or empty.
The / (root) file system may not be backed up correctly. To protect
data from a catastrophic failure, the /, /usr, and /var file systems must be
regularly backed up with the vdump command in addition to backups done
using other backup software.
See
vdump(8)
reference page for information.
Operational: Use the userquota and groupquota mount options with
all read write AdvFS file systems in /etc/fstab, even if quotas are not enforced.
Using the userquota and groupquota mount options facilitates AdvFS
maintenance and does not affect performance.
See
fstab(4)
reference page, and
AdvFS Administration
root_domain#root / advfs rw 0 0 usr_domain#usr /usr advfs rw 0 0
Tuning Suggestion: Adjust AdvfsPreallocAccess to a value within
the 448 to 896 range.
Use the sysconfigdb command or the Kernel Tuner to add the following
to /etc/sysconfigtab:
advfs: AdvfsPreallocAccess=448You must reboot the system in order to use the new value.
Information: Regular maintenance of AdvFS file systems is recommended.
Perform the following tasks on a lightly loaded system:
Run quotacheck regularly (invoked automatically at reboot time if
quotas are enabled and enforced)
Run defragment regularly
Run balance regularly
After any unrecoverable I/O error, run verify before remounting disks
See the
AdvFS Guide to File System Administration
AdvfsCacheMaxPercent value is 7 % and memory consumed is 8514 KB ( 8 MB ).
AdvFS Access hit rate: 80 %
AdvFS kernel variables:
dbx version 3.11.10
Type 'help' for help.
stopped at [thread_block:2366 ,0xfffffc00002c53e0] Source not available
warning: Files compiled -g3: parameter values probably wrong
====== flushvolcalls:
{
[0] 0
[1] 0
[2] 0
[3] 0
[4] 148
[5] 0
[6] 555206
[7] 2871
[8] 0
}
====== numbufs:
1152
====== AdvfsFixUpSBM:
0
====== AllowQuotaFailuresForRoot:
0
====== DoReadAhead:
1
====== AdvfsDoPreAlloc:
1
====== NumAccess:
896
====== max_prefetch_pgs:
64
====== AdvfsUbcHit:
1152872
====== AdvfsUbcMiss:
1001333
====== Advfs_access_stats:
struct {
found_hashlist = 35878386
found_state_retry = 0
found_tag_change = 0
found_state_invalid = 88118
freelist_retry = 12
from_freelist = 8654223
recycled_access = 8293276
recycled_vnode = 8653326
waited_for_free = 0
failed_with_emfile = 0
}
total 16 -r-------- 1 root system 0 Aug 30 11:03 .advfslock_fdmns -r-------- 1 root system 0 Aug 30 11:03 .advfslock_root_domain -r-------- 1 root system 0 Aug 30 11:03 .advfslock_usr_domain drwxr-xr-x 2 root system 8192 Aug 30 11:03 root_domain drwxr-xr-x 2 root system 8192 Aug 30 11:03 usr_domain /etc/fdmns/root_domain: total 0 lrwxr-xr-x 1 root system 9 Aug 30 11:03 rz0a -> /dev/rz0a /etc/fdmns/usr_domain: total 0 lrwxr-xr-x 1 root system 9 Aug 30 11:03 rz0f -> /dev/rz0f
Id Date Created LogPgs Domain Name
46d69047.00003930 Thu Aug 30 10:39:19 2007 512 root_domain
Vol 512-Blks Free % Used Cmode Rblks Wblks Vol Name
1L 262144 116256 56% on 256 256 /dev/rz0a
Output of chvol /dev/rz0a volume:
rblks = 256 wblks = 256 cmode = on, thresh = 16384
Output of showfsets root_domain domain:
root Id : 46d69047.00003930.1.8001 Files : 1989, SLim= 0, HLim= 0 Blocks (512) : 124818, SLim= 0, HLim= 0 Quota Status : user=off group=off
Output of BMT showfile root_domain domain:
Output of showfile -x M-6 for root_domain domain:
Id Vol PgSz Pages XtntType Segs SegSz I/O Perf File
fffffffa.0000 1 16 386 simple ** ** ftx 100% M-6
extentMap: 1
pageOff pageCnt vol volBlock blockCnt
0 2 1 32 32
2 384 1 8352 6144
extentCnt: 2
advfsstat [-s -b -p -r -n -l] root_domain
The -s output:
Domain -1188466759.14640- Stats -
Deref 221870211 Refhit 221822403 Refhitwait 830 R_ahead 22885
Unpin 32049013 Pinhit 31638103 Pinhitwait 623 Pinreads 0
Lazy 31488295 Log 560582 Blocking 130 Clean 6
Ubchit 709137 Unconsol 7252 ConsolAbort 0
UnpinMeta 21201350 UnpinFtx 30978254 UnpinData 510177
DerefMeta 44329597 DerefFtx 218970440 DerefData 2899771
Disk Reads Writes Rglobs AveRglob Wglobs AveWglob
---- ----- ------ ------ -------- ------ --------
1 27458 389175 2557 135 97058 129
The -b -s output:
pin ref unpin-type misc cons cnt hit hitw read cnt hit hitw lazy blk cln log ra ubc un abrt 30M 30M 623 0 211M 211M 830 30M 130 6 547K 22K 692K 7252 0
The -p -s output:
pin pin-type data-type cnt hit hitw read lazy blk cln log bsFtx fsFtx other 30M 30M 623 0 30M 130 6 547K 19M 9M 498K
The -r -s output:
ref data-type cnt hit hitw bsFtx fsFtx other 211M 211M 830 42M 166M 2M
The -n -s output:
goodh negh badh falsh miss 32M 2M 1M 846K 12M
The -s -l 2 output:
type wait rwait signl bcast lock
mutex 0
genLk 0 0 0 0 0
stateLk 2435 0 45K 3472 84M
shrLk 0 0 0 0 0
excLk 0 0 0 0 0
bufStateLk 200K 0 200K 45 0
pinBlkCv 215K 211K 220K 0 0
bfFlushCv 14K 1366 66K 0 0
ftxCv 246 1 192 189 0
msgQCv 120K 0 120K 0 0
total 554K 0 632K 234
type wait rwait signl bcast lock
LOG_DESC 0 0 0 0 0
LOG_READ_STREAM 0 0 0 0 0
BF_STATE 1 0 5 0 84M
BF_XTNT_MAP 0 0 0 0 0
BF_COW 0 0 0 0 0
BF_MCELL_LIST 0 0 0 0 0
BF_FLUSH 0 0 0 0 0
BUFFER 200K 0 200K 45 0
BF_SET_TBL 0 0 0 0 0
BF_SET_TAG_DIR 0 0 0 0 0
VD_STG_MAP 0 0 0 0 0
VD_MCELLS 0 0 0 0 0
VD_PAGE0_MCELLS 0 0 0 0 0
VD_MIG_MCELLS 0 0 0 0 0
VD_DEV_BUSY 0 0 0 0 0
VD_ACTIVE 1 0 3 0 3
VD_LAZY_BLOCK 0 0 0 0 0
WIRED_FREE 2433 0 45K 3472 2470
RAW_BUF_FREE 0 0 0 0 0
INIT 0 0 0 0 0
FS_BF_GET 0 0 0 0 0
CLONE_DEL 0 0 0 0 0
unused23 0 0 0 0 0
unused24 0 0 0 0 0
FS_CONTEXT_SEM 0 0 0 0 0
DQ_LOCK 0 0 0 0 0
FILE_SET_LK 0 0 0 0 0
DOMAIN_TBL 0 0 0 0 0
BF_SET_STATE 0 0 0 0 0
SERVICE_CLASS_TBL 0 0 0 0 0
BF_SHLV 0 0 0 0 0
FS_FILE 0 0 0 0 0
ZAP_MCELLS 0 0 0 0 0
MOVE_METADATA 0 0 0 0 0
MIG_TRUNC 0 0 0 0 0
DDL_ACTIVE 0 0 0 0 0
DDL_ACTIVE_WAIT 0 0 0 0 0
QUOTA_FILE_LOCK 0 0 0 0 0
FRAG_BF 0 0 0 0 0
BF_SET_SHLV 0 0 0 0 0
LKU_MSS_PQD 0 0 0 0 0
LKU_MSS_PQD_LOWPRI 0 0 0 0 0
Id Date Created LogPgs Domain Name
46d6904f.0001f370 Thu Aug 30 10:39:27 2007 512 usr_domain
Vol 512-Blks Free % Used Cmode Rblks Wblks Vol Name
1L 11778874 8115648 31% on 256 256 /dev/rz0f
Output of chvol /dev/rz0f volume:
rblks = 256 wblks = 256 cmode = on, thresh = 16384
Output of showfsets usr_domain domain:
usr Id : 46d6904f.0001f370.1.8001 Files : 61518, SLim= 0, HLim= 0 Blocks (512) : 3553040, SLim= 0, HLim= 0 Quota Status : user=off group=off
Output of BMT showfile usr_domain domain:
Output of showfile -x M-6 for usr_domain domain:
Id Vol PgSz Pages XtntType Segs SegSz I/O Perf File
fffffffa.0000 1 16 4994 simple ** ** ftx 100% M-6
extentMap: 1
pageOff pageCnt vol volBlock blockCnt
0 2 1 32 32
2 4992 1 9744 79872
extentCnt: 2
advfsstat [-s -b -p -r -n -l] usr_domain
The -s output:
Domain -1188466767.127856- Stats -
Deref 8771962 Refhit 8588084 Refhitwait 84742 R_ahead 251816
Unpin 7477097 Pinhit 6959002 Pinhitwait 1534 Pinreads 0
Lazy 7334278 Log 128082 Blocking 10910 Clean 3827
Ubchit 483803 Unconsol 4726 ConsolAbort 0
UnpinMeta 2657659 UnpinFtx 3862822 UnpinData 3486193
DerefMeta 3399741 DerefFtx 5688802 DerefData 3083160
Disk Reads Writes Rglobs AveRglob Wglobs AveWglob
---- ----- ------ ------ -------- ------ --------
1 173674 175116 19171 150 67139 112
The -b -s output:
pin ref unpin-type misc cons cnt hit hitw read cnt hit hitw lazy blk cln log ra ubc un abrt 7M 6M 1534 0 8M 8M 82K 6M 10K 3827 125K 245K 472K 4726 0
The -p -s output:
pin pin-type data-type cnt hit hitw read lazy blk cln log bsFtx fsFtx other 7M 6M 1534 0 6M 10K 3827 125K 2M 1M 3M
The -r -s output:
ref data-type cnt hit hitw bsFtx fsFtx other 8M 8M 82K 3M 2M 2M
The -n -s output:
goodh negh badh falsh miss 32M 2M 1M 846K 12M
The -s -l 2 output:
type wait rwait signl bcast lock
mutex 0
genLk 0 0 0 0 0
stateLk 2435 0 45K 3472 84M
shrLk 0 0 0 0 0
excLk 0 0 0 0 0
bufStateLk 200K 0 200K 45 0
pinBlkCv 215K 211K 220K 0 0
bfFlushCv 14K 1366 66K 0 0
ftxCv 246 1 192 189 0
msgQCv 120K 0 120K 0 0
total 554K 0 632K 234
type wait rwait signl bcast lock
LOG_DESC 0 0 0 0 0
LOG_READ_STREAM 0 0 0 0 0
BF_STATE 1 0 5 0 84M
BF_XTNT_MAP 0 0 0 0 0
BF_COW 0 0 0 0 0
BF_MCELL_LIST 0 0 0 0 0
BF_FLUSH 0 0 0 0 0
BUFFER 200K 0 200K 45 0
BF_SET_TBL 0 0 0 0 0
BF_SET_TAG_DIR 0 0 0 0 0
VD_STG_MAP 0 0 0 0 0
VD_MCELLS 0 0 0 0 0
VD_PAGE0_MCELLS 0 0 0 0 0
VD_MIG_MCELLS 0 0 0 0 0
VD_DEV_BUSY 0 0 0 0 0
VD_ACTIVE 1 0 3 0 3
VD_LAZY_BLOCK 0 0 0 0 0
WIRED_FREE 2433 0 45K 3472 2470
RAW_BUF_FREE 0 0 0 0 0
INIT 0 0 0 0 0
FS_BF_GET 0 0 0 0 0
CLONE_DEL 0 0 0 0 0
unused23 0 0 0 0 0
unused24 0 0 0 0 0
FS_CONTEXT_SEM 0 0 0 0 0
DQ_LOCK 0 0 0 0 0
FILE_SET_LK 0 0 0 0 0
DOMAIN_TBL 0 0 0 0 0
BF_SET_STATE 0 0 0 0 0
SERVICE_CLASS_TBL 0 0 0 0 0
BF_SHLV 0 0 0 0 0
FS_FILE 0 0 0 0 0
ZAP_MCELLS 0 0 0 0 0
MOVE_METADATA 0 0 0 0 0
MIG_TRUNC 0 0 0 0 0
DDL_ACTIVE 0 0 0 0 0
DDL_ACTIVE_WAIT 0 0 0 0 0
QUOTA_FILE_LOCK 0 0 0 0 0
FRAG_BF 0 0 0 0 0
BF_SET_SHLV 0 0 0 0 0
LKU_MSS_PQD 0 0 0 0 0
LKU_MSS_PQD_LOWPRI 0 0 0 0 0
The /var/opt/advfsd/disks.ignore file is not available.
The /var/opt/advfsd/alerts.list file is not available.
Tuning Note: NFS V3 and TCP/IP provide the best performance on heavily loaded systems and networks.
NFS_CONFIGURED:
NFSSERVING:
NFSLOCKING:
NUM_NFSD:
NUM_NFSIOD:
PCNFSD:
NONROOTMOUNTS:
NUM_TCPD:
NUM_UDPD:
NUM_PROPLISTD:
AUTOMOUNT:
AUTOMOUNT_ARGS:
NFS kernel variables:
dbx version 3.11.10 Type 'help' for help. stopped at [thread_block:2366 ,0xfffffc00002c53e0] Source not available warning: Files compiled -g3: parameter values probably wrong ====== udpcksum: 1 ====== nfs_write_gather: 1 ====== nfs3_write_gather: 1 ====== ubc_nfsloopback: "ubc_nfsloopback" is not defined or not active
The mount command output for NFS file systems currently mounted on the system:
The exports file specifies remote access mount points for the NFS protocol.
Server rpc:
tcp: calls badcalls nullrecv badlen xdrcall creates
0 0 0 0 0 0
udp: calls badcalls nullrecv badlen xdrcall
0 0 0 0 0
Server nfs:
calls badcalls badprog badproc badvers badargs
0 0 0 0 0 0
unprivport weakauth
0 0
Server nfs V2:
null getattr setattr root lookup readlink read
0 0% 0 0% 0 0% 0 0% 0 0% 0 0% 0 0%
wrcache write create remove rename link symlink
0 0% 0 0% 0 0% 0 0% 0 0% 0 0% 0 0%
mkdir rmdir readdir statfs
0 0% 0 0% 0 0% 0 0%
Server nfs V3:
null getattr setattr lookup access readlink read
0 0% 0 0% 0 0% 0 0% 0 0% 0 0% 0 0%
write create mkdir symlink mknod remove rmdir
0 0% 0 0% 0 0% 0 0% 0 0% 0 0% 0 0%
rename link readdir readdir+ fsstat fsinfo pathconf
0 0% 0 0% 0 0% 0 0% 0 0% 0 0% 0 0%
commit
0 0%
Client rpc:
tcp: calls badxids badverfs timeouts newcreds
0 0 0 0 0
creates connects badconns inputs avails interrupts
0 0 0 0 0 0
udp: calls badxids badverfs timeouts newcreds retrans
0 0 0 0 0 0
badcalls timers waits
0 0 0
Client nfs:
calls retrans badcalls nclget nclsleep
0 0 0 0 0
Client nfs V2:
null getattr setattr root lookup readlink read
0 0% 0 0% 0 0% 0 0% 0 0% 0 0% 0 0%
wrcache write create remove rename link symlink
0 0% 0 0% 0 0% 0 0% 0 0% 0 0% 0 0%
mkdir rmdir readdir statfs
0 0% 0 0% 0 0% 0 0%
Client nfs V3:
null getattr setattr lookup access readlink read
0 0% 0 0% 0 0% 0 0% 0 0% 0 0% 0 0%
write create mkdir symlink mknod remove rmdir
0 0% 0 0% 0 0% 0 0% 0 0% 0 0% 0 0%
rename link readdir readdir+ fsstat fsinfo pathconf
0 0% 0 0% 0 0% 0 0% 0 0% 0 0% 0 0%
commit
0 0%
-rwxr-xr-x 1 bin bin 1428 May 14 2000 /etc/autopush.conf
File /etc/autopush.conf
# # ***************************************************************** # * * # * Copyright Compaq Computer Corporation, 2000 * # * * # * The software contained on this media is proprietary to * # * and embodies the confidential technology of Compaq * # * Computer Corporation. Possession, use, duplication or * # * dissemination of the software and media is authorized only * # * pursuant to a valid written license from Compaq Computer * # * Corporation. * # * * # * RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure * # * by the U.S. Government is subject to restrictions as set * # * forth in Subparagraph (c)(1)(ii) of DFARS 252.227-7013, * # * or in FAR 52.227-19, as applicable. * # * * # ***************************************************************** # # # HISTORY # # # @(#)$RCSfile: autopush.conf,v $ $Revision: 1.1.6.4 $ (DEC) $Date: 1994/02/22 22:35:20 $ # # # (c) Copyright 1990, 1991, 1992 OPEN SOFTWARE FOUNDATION, INC. # ALL RIGHTS RESERVED # # # OSF/1 Release 1.2 # #maj min last_minor modules 6 -1 0 ldterm
NSR Server is not installed.
NSR Client is not installed.Operational: Device name for disk btl 1 2 0 rz10 does not exist
Storage Map for node3.wickensonline.co.uk | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Filesys | Fsize (MB) | Fset | Dsize (MB) | Domain | Volume | Plex | Subdisk | dg | Cluster | Service | RZ | Bus | Target | Lun | Typ | FW | HSZ | Unit | container | csize (MB) | state | wbc | hdisks:type:dfw:hdsz |
| 4.2BSD ( g ) | 700 | (unused / unmounted partition) | 700 | node3 | local | rz0 | 0 | 0 | 0 | ATLAS10K2-TY184J | DDD6 | ||||||||||||
| swap ( b ) | 128 | (mounted swap partition) | 128 | node3 | local | rz0 | 0 | 0 | 0 | ATLAS10K2-TY184J | DDD6 | ||||||||||||
| swap ( c ) | 17366 | (mounted swap partition) | 17366 | node3 | local | rz11 | 1 | 3 | 0 | DXHS18Y | 0430 | ||||||||||||
| unavailable | (No disklabel) | node3 | local | rz1 | 0 | 1 | 0 | ATLAS10K3_18_SCA | 020W | ||||||||||||||
| unused | (no unix /dev) | node3 | local | unknown | 1 | 2 | 0 | RRD43 | 1084 | ||||||||||||||
| unused | (unused / unmounted CD) | node3 | local | rz4 | 0 | 4 | 0 | CD-ROM | 1.12 | ||||||||||||||
| unused | (unused / unmounted partitions: 4) | 10802 | node3 | local | rz0 | 0 | 0 | 0 | ATLAS10K2-TY184J | DDD6 | |||||||||||||
| / | 60 | root | 128 | root_domain | node3 | local | rz0 | 0 | 0 | 0 | ATLAS10K2-TY184J | DDD6 | |||||||||||
| /usr | 1735 | usr | 5751 | usr_domain | node3 | local | rz0 | 0 | 0 | 0 | ATLAS10K2-TY184J | DDD6 | |||||||||||
Information: Read Network Tuning Guide
See
Internet/Intranet Technical Information
for information about tuning Tru64 UNIX on an Internet server.
There are no defined netrain interfaces.
HOSTNAME: node3.wickensonline.co.uk
NUM_NETCONFIG: 1
NETDEV_0: ln0
IFCONFIG_0: 192.168.1.249 netmask 255.255.255.0
NETDEV_1:
IFCONFIG_1:
NETDEV_2:
IFCONFIG_2:
NETDEV_3:
IFCONFIG_3:
NETDEV_4:
IFCONFIG_4:
RWHOD: no
RWHOD_FLAGS:
WRITESRV:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll Drop
ln0 1500 <Link> 08:00:2b:bb:81:c9 115144 0 95158 0 22 0
ln0 1500 DLI none 115144 0 95158 0 22 0
ln0 1500 192.168.1 node3 115144 0 95158 0 22 0
ALL-SYSTEMS.MCAST.N
09:00:2b:02:01:04
09:00:2b:00:00:0f
01:00:5e:00:00:01
cf:00:00:00:00:00
sl0* 296 <Link> 0 0 0 0 0 0
lo0 4096 <Link> 76983 0 76983 0 0 0
lo0 4096 loop localhost 76983 0 76983 0 0 0
ALL-SYSTEMS.MCAST.N
01:00:5e:00:00:01
dbx version 3.11.10
Type 'help' for help.
stopped at [thread_block:2366 ,0xfffffc00002c53e0] Source not available
warning: Files compiled -g3: parameter values probably wrong
====== somaxconn:
1024
====== sominconn:
0
====== sb_max:
1048576
====== sbcompress_threshold:
0
====== total_tcp_inpcbs:
28
====== tcbhashsize:
512
====== sobacklog_hiwat:
1
====== sobacklog_drops:
0
====== somaxconn_drops:
0
====== sbappendaddr_failed_addrtoolong:
0
====== sbappendaddr_failed_nombuf:
0
====== sbappendaddr_failed_nospace:
1
====== ipport_userreserved:
5000
====== tcp_msl:
60
====== tcp_rexmit_interval_min:
2
====== tcp_cwnd_segments:
2
====== tcp_keepinit:
150
====== tcp_keepalive_default:
0
====== tcpnodelack:
0
====== inifaddr_hsize:
32
====== tcbhashstats:
struct {
ChainHiwatCount = 222652
ChainHiwatThreshold = 0
EmptyWarnCount = 0
EmptyWarnThreshold = 0
FastActive = 0
FastIdle = 11
SlowActive = 0
AllTimeSlowActive = 4
SlowIdle = 11
ChainHiwat = 2
AllTimeChainHiwat = 3
ChainLowat = 1
EmptyBuckets = 501
TotalBuckets = 512
TotalTcpConns = 28
AllTimeMaxTcpConns = 30
}
====== icmp_rejectcodemask:
0
====== ipintrq:
struct {
ifq_head = (nil)
ifq_tail = (nil)
ifq_len = 0
ifq_maxlen = 512
ifq_drops = 0
ifq_slock = struct {
sl_data = 0
sl_info = 0
sl_cpuid = 0
sl_lifms = 0
}
}
====== tcp_sendspace:
32768
====== tcp_recvspace:
32768
====== udp_sendspace:
9216
====== udp_recvspace:
41600
====== unpst_sendspace:
8192
====== unpst_recvspace:
8192
====== unpdg_sendspace:
2048
====== unpdg_recvspace:
4096
====== tcp_noackwar:
1
====== routemode:
0
ln0 Ethernet counters at Wed Sep 5 13:05:07 2007
65535 seconds since last zeroed
41367787 bytes received
25335797 bytes sent
115160 data blocks received
95177 data blocks sent
430772 multicast bytes received
5262 multicast blocks received
285029 multicast bytes sent
2097 multicast blocks sent
745 blocks sent, initially deferred
6 blocks sent, single collision
8 blocks sent, multiple collisions
0 send failures
0 collision detect check failure
0 receive failures
0 unrecognized frame destination
0 data overruns
0 system buffer unavailable
0 user buffer unavailable
ip: 184661 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with header length < data size 0 with data length < header length 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 packets forwarded 0 packets not forwardable 0 packets denied access 0 redirects sent 0 packets with unknown or unsupported protocol 184661 packets consumed here 165744 total packets generated here 0 lost packets due to resource problems 0 total packets reassembled ok 0 output packets fragmented ok 0 output fragments created 0 packets with special flags set icmp: 1 call to icmp_error 0 errors not generated 'cuz old ip message was too short 0 errors not generated 'cuz old message was icmp Output histogram: destination unreachable: 1 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length 0 message responses generated igmp: 0 messages received 0 messages received with too few bytes 0 messages received with bad checksum 0 membership queries received 0 membership queries received with invalid field(s) 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 membership reports sent tcp: 163830 packets sent 73083 data packets (20064135 bytes) 0 data packets (0 bytes) retransmitted 46251 ack-only packets (876 delayed) 0 URG only packets 0 window probe packets 11488 window update packets 33008 control packets 184293 packets received 105607 acks (for 20097159 bytes) 22042 duplicate acks 0 acks for unsent data 45361 packets (32620005 bytes) received in-sequence 47 completely duplicate packets (60290 bytes) 0 packets with some dup. data (0 bytes duped) 12304 out-of-order packets (1823900 bytes) 0 packets (0 bytes) of data after window 0 window probes 3 window update packets 1 packet received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 11000 connection requests 11015 connection accepts 22015 connections established (including accepts) 22016 connections closed (including 1 drop) 0 embryonic connections dropped 112127 segments updated rtt (of 112128 attempts) 0 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 19 keepalive timeouts 18 keepalive probes sent 1 connection dropped by keepalive udp: 1892 packets sent 368 packets received 0 incomplete headers 0 bad data length fields 0 bad checksums 0 full sockets 312 for no port (311 broadcasts, 0 multicasts) 0 input packets missed pcb cache
23 Kbytes for sockets (peak usage 24 Kbytes)
36 Kbytes for protocol control blocks (peak usage 36 Kbytes)
2 Kbytes for routing table (peak usage 2 Kbytes)
2 Kbytes for interface addresses (peak usage 2 Kbytes)
4 Kbytes for socket names (peak usage 4 Kbytes)
< 1 Kbyte for ip multicast addresses (peak usage < 1 Kbyte)
< 1 Kbyte for interface multicast addresses (peak usage < 1 Kbyte)
0 requests for mbufs denied
0 calls to protocol drain routines
65 Kbytes allocated to network
Network threads: 1 netisrthreads configured (peak active 1)
The services file associates Internet service names and aliases with the port number and protocol used by the service.
echo 7/tcp echo 7/udp discard 9/tcp sink null discard 9/udp sink null systat 11/tcp users daytime 13/tcp daytime 13/udp netstat 15/tcp quote 17/udp text chargen 19/tcp ttytst chargen 19/udp ttytst ftp 21/tcp telnet 23/tcp smtp 25/tcp mail time 37/tcp timserver time 37/udp timserver name 42/tcp nameserver whois 43/tcp nicname auditd 48/tcp # Digital Audit Daemon domain 53/udp nameserver # domain name server domain 53/tcp nameserver mtp 57/tcp bootps 67/udp bootpc 68/udp tftp 69/udp rje 77/tcp finger 79/tcp link 87/tcp ttylink supdup 95/tcp hostnames 101/tcp hostname snagas 108/tcp pop 109/tcp auth 113/tcp authentication nntp 119/tcp readnews erpc 121/udp # RPC listener for Annex term srvr ntp 123/udp ntp imap 143/tcp snmp 161/udp snmp-trap 162/udp snmp-rt 167/udp # SNMP snmpd<-->routed/gated print-srv 170/tcp dnacml 436/tcp # DECnet/OSI biff 512/udp comsat exec 512/tcp login 513/tcp who 513/udp whod shell 514/tcp cmd syslog 514/udp printer 515/tcp spooler talk 517/udp ntalk 518/udp efs 520/tcp route 520/udp router routed timed 525/udp timeserver courier 530/tcp rpc uucp 540/tcp uucpd #the uucp daemon klogin 543/tcp kshell 544/tcp kcmd kxct 549/tcp new-rwho 550/udp new-who rmonitor 560/udp rmonitord monitor 561/udp binlogd 706/udp #Binary Error Log daemon kerberos 750/udp kdc kerberos_master 751/tcp passwd_server 752/udp krb_prop 753/tcp at-rtmp 769/udp at-nbp 770/udp at-echo 771/udp sms_db 775/tcp sms_update 777/tcp serv 778/tcp supfilesrv 871/tcp supfiledbg 1127/tcp ingreslock 1524/tcp nbiff 1950/udp rauth2 2001/udp zephyr-clt 2103/udp zephyr-hm 2104/udp genquery 2220/tcp writesrv 2401/tcp # for the write server (AIXism, new) man 9535/tcp dictionary 10300/tcp webster kdebug 10401/tcp cfgmgr 10402/tcp wnn4 22273/tcp # Wnn Ver 4.1 dtspc 6112/tcp #subprocess control rdg 10403/udp rdg 10403/tcp
The inetd daemon reads the inetd.conf file for information on how to handle Internet service requests.
ftp stream tcp nowait root /usr/sbin/ftpd ftpd telnet stream tcp nowait root /usr/sbin/telnetd telnetd shell stream tcp nowait root /usr/sbin/rshd rshd login stream tcp nowait root /usr/sbin/rlogind rlogind exec stream tcp nowait root /usr/sbin/rexecd rexecd finger stream tcp nowait root /usr/sbin/fingerd fingerd comsat dgram udp wait root /usr/sbin/comsat comsat ntalk dgram udp wait root /usr/sbin/ntalkd ntalkd time dgram udp wait root internal time kdebug stream tcp nowait root /usr/sbin/kdebugd kdebugd cfgmgr stream tcp nowait root /sbin/cfgmgr cfgmgr rquotad/1 dgram rpc/udp wait root /usr/sbin/rpc.rquotad rpc.rquotad dtspc stream tcp nowait root /usr/dt/bin/dtspcd dtspcd rpc.cmsd/2-4 dgram rpc/udp wait root /usr/dt/bin/rpc.cmsd rpc.cmsd rpc.ttdbserverd stream rpc/tcp wait root /usr/dt/bin/rpc.ttdbserverd rpc.ttdbserverd
The inet.local file is used to set additional network parameters at startup time.
The /etc/iptos file is not available.
The ifaccess.conf file specifies access filters entries for network interfaces.
ifconfig ln0
ln0: flags=c63<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST,SIMPLEX>
inet 192.168.1.249 netmask ffffff00 broadcast 192.168.1.255 ipmtu 1500
ifconfig sl0
sl0: flags=10<POINTOPOINT>
ifconfig lo0
lo0: flags=100c89<UP,LOOPBACK,NOARP,MULTICAST,SIMPLEX,NOCHECKSUM>
inet 127.0.0.1 netmask ff000000 ipmtu 4096
4 ESTABLISHED 17 LISTEN 7 TIME_WAIT
netstat -an
printing 1 hashtable with 512 buckets Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address (state) tcp 0 0 192.168.1.249.23 192.168.1.128.34135 ESTABLISHED tcp 0 0 192.168.1.249.23 192.168.1.128.43920 ESTABLISHED tcp 0 0 127.0.0.1.4088 127.0.0.1.53 TIME_WAIT tcp 0 0 192.168.1.249.23 192.168.1.128.39998 ESTABLISHED tcp 0 0 192.168.1.249.23 192.168.1.128.46166 ESTABLISHED tcp 0 0 127.0.0.1.4084 127.0.0.1.2301 TIME_WAIT tcp 0 0 127.0.0.1.4085 127.0.0.1.2301 TIME_WAIT tcp 0 0 127.0.0.1.4086 127.0.0.1.2301 TIME_WAIT tcp 0 0 127.0.0.1.4087 127.0.0.1.2301 TIME_WAIT tcp 0 0 127.0.0.1.4089 127.0.0.1.2301 TIME_WAIT tcp 0 0 127.0.0.1.4090 127.0.0.1.2301 TIME_WAIT tcp 0 0 *.6000 *.* LISTEN tcp 0 0 *.1027 *.* LISTEN tcp 0 0 *.2301 *.* LISTEN tcp 0 0 *.515 *.* LISTEN tcp 0 0 *.1024 *.* LISTEN tcp 0 0 *.6112 *.* LISTEN tcp 0 0 *.10402 *.* LISTEN tcp 0 0 *.10401 *.* LISTEN tcp 0 0 *.79 *.* LISTEN tcp 0 0 *.512 *.* LISTEN tcp 0 0 *.513 *.* LISTEN tcp 0 0 *.514 *.* LISTEN tcp 0 0 *.23 *.* LISTEN tcp 0 0 *.21 *.* LISTEN tcp 0 0 *.25 *.* LISTEN tcp 0 0 *.111 *.* LISTEN tcp 0 0 *.53 *.* LISTEN udp 0 0 192.168.1.249.2301 *.* udp 0 0 *.177 *.* udp 0 0 *.2301 *.* udp 0 0 *.* *.* udp 0 0 *.1027 *.* udp 0 0 *.1026 *.* udp 0 0 *.37 *.* udp 0 0 *.518 *.* udp 0 0 *.512 *.* udp 0 0 *.* *.* udp 0 0 *.* *.* udp 0 0 *.161 *.* udp 0 0 *.111 *.* udp 0 0 *.1025 *.* udp 0 0 *.53 *.* udp 0 0 127.0.0.1.53 *.* udp 0 0 192.168.1.249.53 *.* udp 0 0 *.520 *.* udp 0 0 *.* *.* udp 0 0 *.514 *.*
netstat -f unix
Active UNIX domain sockets Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr 7a85b80 dgram 0 0 6650000 0 7945400 0 /dev/log 7a85e00 dgram 0 0 6614000 0 0 0 /dev/binlogdmb 643c140 dgram 0 0 0 7945300 0 0 643d040 dgram 0 0 0 7945300 0 794be80 643cdc0 stream 0 0 63eb200 0 0 0 /var/agentx/master 643cf00 stream 0 0 0 5e33e80 0 0 643d180 stream 0 0 0 5e32900 0 0 /var/agentx/master 643d540 stream 0 0 0 6681a00 0 0 /var/agentx/master 643da40 stream 0 0 0 6681400 0 0 /var/agentx/master 649d540 stream 0 0 0 6675200 0 0 /var/agentx/master 60a7180 stream 0 0 0 794a680 0 0 /var/agentx/master 60a7040 stream 0 0 0 6681080 0 0 643d680 stream 0 0 0 6681700 0 0 643d400 dgram 0 0 0 7945300 0 5e32a80 643d900 stream 0 0 0 6681380 0 0 649c8c0 stream 0 0 0 6675180 0 0 649d680 dgram 0 0 0 7945300 0 6681500 649d7c0 stream 0 0 795f200 0 0 0 /dev/printer 643dcc0 stream 0 0 7226200 0 0 0 /tmp/.X11-unix/X0 60a6780 stream 0 0 0 6681100 0 0 /tmp/.X11-unix/X0 60a6b40 stream 0 0 0 5e33000 0 0 /tmp/.X11-unix/X0 60a6dc0 stream 0 0 0 5e33b80 0 0 /tmp/.X11-unix/X0 60a6000 stream 0 0 0 7a93f80 0 0 60a6a00 stream 0 0 0 5e32d80 0 0 60a6c80 stream 0 0 0 5e33780 0 0
Information: How to gather a network trace by using tcpdump.
To gather a network trace, perform the following tasks:
1. Configure the kernel with the PACKETFILTER option (use doconfig)
2. Create packetfilter /dev/ entries (change to the /dev directory and use ./MAKEDEV pfilt)
3. Set the adapter to use copy-all mode and to receive all packets (use pfconfig +p +c interface)
4. Run the tcpdump utility (use tcpdump -w outfile args)
See the
tcpdump(8) reference page for information.
ROUTER: no
ROUTED: yes
ROUTED_FLAGS: -q
GATED: no
GATED_OLD: no
GATED_FLAGS:
The routes file contains the static TCP/IP routes that are defined when the network starts. Routes are defined by using the route command.
default 192.168.1.20
The /etc/gated.conf file is not available.
The /etc/gateways file is not available.
The networks file contains information about the known networks that comprise the Internet. The routed daemon reads the file in order to obtain information about report Internet routing.
loop 127 loopback
The /etc/ogated.conf file is not available.
The /etc/mrouted.conf file is not available.
The active routing table displays the TCP/IP routes that are currently being used by the system. The routes that are used must be the same as the routes defined by the /etc/routes file.
netstat -rs
routing: 0 bad routing redirects 0 dynamically created routes 0 new gateways due to redirects 0 destinations found unreachable 0 uses of a wildcard route
netstat -rnv
Routing tables Destination Gateway Flags Refs Use Interface MTU HopCnt Expire RPipe SPipe Thresh RTT RTTvar Netmasks: Inet 0.0.0.0 Inet 255.255.255.0 Route Tree for Protocol Family 2: default 192.168.1.20 UGS 0 15011 ln0 0 0 0 0 0 0 0 0 127.0.0.1 127.0.0.1 UH 8 76988 lo0 0 0 0 0 0 0 0 0 192.168.1/24 192.168.1.249 U 5 73767 ln0 0 0 0 0 0 0 437500 375000
iprsetup -d
ipforwarding = 0 ipgateway = 0 ipfirewall = 0 ipchkredirects = 0 ipsrcroute = 1
The /etc/screend.conf file is not available.
screend kernel variables
dbx version 3.11.10 Type 'help' for help. stopped at [thread_block:2366 ,0xfffffc00002c53e0] Source not available warning: Files compiled -g3: parameter values probably wrong ====== screen_cachewidth: 8 ====== screen_cachedepth: 8 ====== screen_maxpend: 32 ====== screen_cachemiss: "screen_cachemiss" is not defined or not active ====== screen_cachehits: "screen_cachehits" is not defined or not active
The system is not part of a firewall.
ls -Ll of /etc/ppp/
total 16 -rwxr--r-- 1 root bin 3973 May 14 2000 #.mrg..options -rw-r--r-- 1 root bin 3348 May 14 2000 .new..options -rw-r--r-- 1 root bin 3348 May 14 2000 .proto..options -rw-r--r-- 1 root bin 3348 May 14 2000 options
The options file contains system default parameters for PPP.
asyncmap 200a0000 # XOFF, XON, and ^] (the default telnet escape) escape 7e,7f,fe,ff,93 # 7-bit and 8-bit variants of rlogin escapes # 0x93 is XOFF or-ed with top bit (0x80) mru 296 # IP header plus 256 more octets
The /etc/ppp/ip-up file is not available.
The /etc/ppp/ip-down file is not available.
BIND_CONF: YES
BIND_SERVERTYPE: PRIMARY
BIND_SERVERARGS: -b /etc/namedb/named.boot
The hosts file contains information about the known hosts on the network.
127.0.0.1 localhost 192.168.1.249 node3.wickensonline.co.uk node3 192.168.1.128 linux
The resolv.conf file defines the DNS nameserver that the system uses to resolve Internet names such as node3.wickensonline.co.uk.
domain wickensonline.co.uk nameserver 127.0.0.1
The svc.conf file defines how various system databases are accessed.
aliases=local group=local hosts=local,bind netgroup=local networks=local passwd=local protocols=local rpc=local services=local SECLEVEL=BSD # for backwards compatibility ONLY
ls -l /etc/*.conf /etc/hosts
-rwxr-xr-x 1 bin bin 2533 May 14 2000 /etc/#.mrg..binlog.conf -rwxr-xr-x 1 bin bin 4157 May 14 2000 /etc/#.mrg..inetd.conf -rwxr-xr-x 1 bin bin 5444 May 14 2000 /etc/#.mrg..ntp.conf -rwxr-xr-x 1 bin bin 5445 May 14 2000 /etc/atm.conf -rwxr-xr-x 1 bin bin 1428 May 14 2000 /etc/autopush.conf -rwxr-xr-x 1 bin bin 409 May 14 2000 /etc/binlog.conf -rwxr-xr-x 1 bin bin 1779 Aug 30 21:14 /etc/hosts -rwxr-xr-x 1 bin bin 1852 May 14 2000 /etc/ifaccess.conf -rwxr-xr-x 1 bin bin 5024 May 14 2000 /etc/inetd.conf -rwxr-xr-x 1 bin bin 1286 May 14 2000 /etc/latautopush.conf -rwxr-xr-x 1 bin bin 1966 May 14 2000 /etc/ntp.conf -rw-r--r-- 1 root system 563 Aug 30 21:18 /etc/resolv.conf -rwxr-xr-x 1 bin bin 3618 May 14 2000 /etc/snmpd.conf -rwxr-xr-x 1 bin bin 4785 May 14 2000 /etc/strsetup.conf -rwxr-xr-x 1 bin bin 1841 Aug 30 21:18 /etc/svc.conf -rwxr-xr-x 1 bin bin 1834 May 14 2000 /etc/syslog.conf
directory /etc/namedb primary wickensonline.co.uk hosts.db primary 1.168.192.in-addr.arpa hosts.rev primary 0.0.127.in-addr.arpa named.local cache . named.ca
The /etc/namedb/name.local file is not available.
. 3600000 IN NS A.ROOT-SERVERS.NET. A.ROOT-SERVERS.NET. 3600000 A 198.41.0.4 . 3600000 NS B.ROOT-SERVERS.NET. B.ROOT-SERVERS.NET. 3600000 A 128.9.0.107 . 3600000 NS C.ROOT-SERVERS.NET. C.ROOT-SERVERS.NET. 3600000 A 192.33.4.12 . 3600000 NS D.ROOT-SERVERS.NET. D.ROOT-SERVERS.NET. 3600000 A 128.8.10.90 . 3600000 NS E.ROOT-SERVERS.NET. E.ROOT-SERVERS.NET. 3600000 A 192.203.230.10 . 3600000 NS F.ROOT-SERVERS.NET. F.ROOT-SERVERS.NET. 3600000 A 192.5.5.241 . 3600000 NS G.ROOT-SERVERS.NET. G.ROOT-SERVERS.NET. 3600000 A 192.112.36.4 . 3600000 NS H.ROOT-SERVERS.NET. H.ROOT-SERVERS.NET. 3600000 A 128.63.2.53 . 3600000 NS I.ROOT-SERVERS.NET. I.ROOT-SERVERS.NET. 3600000 A 192.36.148.17 . 3600000 NS J.ROOT-SERVERS.NET. J.ROOT-SERVERS.NET. 3600000 A 198.41.0.10 . 3600000 NS K.ROOT-SERVERS.NET. K.ROOT-SERVERS.NET. 3600000 A 193.0.14.129 . 3600000 NS L.ROOT-SERVERS.NET. L.ROOT-SERVERS.NET. 3600000 A 198.32.64.12 . 3600000 NS M.ROOT-SERVERS.NET. M.ROOT-SERVERS.NET. 3600000 A 202.12.27.33
The named daemon is running.
Statistics from the named.stats file:
+++ Statistics Dump +++ (1188993950) Wed Sep 5 13:05:50 2007 110848 time since boot (secs) 110848 time since reset (secs) 0 Unknown query types 5 A queries 3 PTR queries ++ Name Server Statistics ++ (Legend) RR RNXD RFwdR RDupR RFail RFErr RErr RAXFR RLame ROpts SSysQ SAns SFwdQ SDupQ SErr RQ RIQ RFwdQ RDupQ RTCP SFwdR SFail SFErr SNaAns SNXD (Global) 19 1 13 0 0 0 0 0 0 0 6 3 6 2 0 8 0 6 0 2 13 0 0 3 0 [0.0.0.0] 0 0 3 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 2 0 [66.193.87.114] 1 0 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 [127.0.0.1] 0 0 4 0 0 0 0 0 0 0 0 1 0 0 0 8 0 6 0 2 6 0 0 1 0 [128.63.2.53] 1 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 [192.5.5.241] 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 [192.31.80.30] 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 [192.52.178.30] 2 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 [192.58.128.30] 2 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 [192.112.36.4] 1 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 [192.228.79.201] 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 [194.146.106.22] 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 [198.32.4.13] 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 [198.41.0.4] 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 [199.19.56.1] 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 [199.232.41.12] 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 [202.12.27.33] 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 [204.74.113.1] 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 [212.13.197.229] 1 0 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 [212.219.56.157] 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 -- Name Server Statistics -- --- Statistics Dump --- (1188993950) Wed Sep 5 13:05:50 2007
The strsetup.conf file is the configuration database for streams.
ptm /dev/ptmx 0666 clone log /dev/streams/log 0666 clone nuls /dev/streams/nuls 0666 clone echo /dev/streams/echo 0666 clone sad /dev/sad/admin 0666 clone pipe /dev/pipe 0666 clone pipe /dev/streams/pipe 0666 clone kinfo /dev/streams/strkinfo 0666 clone dlb /dev/streams/dlb 0660 clone xtisoUDP /dev/streams/xtiso/udp 0666 clone xtisoTCP /dev/streams/xtiso/tcp 0666 clone
The autopush.conf file specifies the modules to be pushed onto the streams for STREAMS devices.
6 -1 0 ldterm
strsetup -c
STREAMS Configuration Information...Wed Sep 5 13:06:02 2007
Name Type Major Module ID
---- ---- ----- ---------
clone 32 0
kinfo device 52 5020
log device 53 44
nuls device 54 5001
echo device 55 5000
sad device 56 45
pipe device 57 5304
ptm device 58 7609
pts device 6 7608
bba device 59 24880
dlb device 60 5010
lat device 5 5
bufcall module 0
null module 5002
pass module 5003
errm module 5003
ptem module 5003
spass module 5007
rspass module 5008
pipemod module 5303
ldtty module 7701
Configured devices = 11, modules = 9
The localtime file points to the system's timezone file.
lrwxr-xr-x 1 root system 8 Aug 30 11:03 /etc/zoneinfo/localtime -> ./London
TIMED_CONF:
TIMED_FLAGS:
XNTPD_CONF:
XNTP_SERV1:
XNTP_SERV2:
XNTP_SERV3:
XNTP_OPTS:
RDATE_CONF:
The xntpd daemon reads the ntp.conf file in order to synchronize time between systems.
driftfile /etc/ntp.drift
ntp.keys not displayed. Use -all to include in output
xntpdc -p
xntpdc: read: Connection refused
The snmpd.conf file controls the snmpd daemon, which starts automatically at boot time and listens for and responds to queries from remote management stations.
sysName sysLocation unknown sysContact unknown snmpEnableAuthenTraps 1 community public 0.0.0.0 read
The /etc/eca/snmp_pe.conf file is not available.
The /etc/eca/internet_mom.conf file is not available.
The /etc/bootptab file is not available.
The /etc/tftptab file is not available.
JOIND:
JOIND_FLAGS:
The nets file contains startup information for the joind daemon.
The netmasks file contains startup information for the joind daemon.
The namepool file contains startup information for the joind daemon.
The server.pcy file contains startup information for the joind daemon.
default_ttl 86400 provisional_ttl 60 free_list_size 8 name_service dns assign_name_by_ipaddr support_bootp ping_timeout 500 auto_reread
The client.pcy file contains startup information for the joinc daemon.
arp_timeout 2 timeouts 4,8,16,-120 max_bad_offers 2 start_delay 16 lease_desired 604800 # 1 week use_saved_config class_id JOIN.ALPHA.OSF1 request broadcast_address request dns_servers request dns_domain_name request routers request host_name request lease_time request time_offset request static_routes request subnet_mask request nis_servers request nis_domain_name
The joind daemon is not running.
The /var/join/log file was not found.
The rpc file maps RPC names to numbers.
portmapper 100000 portmap sunrpc rstatd 100001 rstat rup perfmeter rusersd 100002 rusers nfs 100003 nfsprog ypserv 100004 ypprog mountd 100005 mount showmount ypbind 100007 walld 100008 rwall shutdown yppasswdd 100009 yppasswd etherstatd 100010 etherstat rquotad 100011 rquotaprog quota rquota sprayd 100012 spray 3270_mapper 100013 rje_mapper 100014 selection_svc 100015 selnsvc database_svc 100016 rexd 100017 rex alis 100018 sched 100019 llockmgr 100020 nlockmgr 100021 x25.inr 100022 statmon 100023 status 100024 bootparam 100026 ypupdated 100028 ypupdate keyserv 100029 keyserver sunlink_mapper 100033 tfsd 100037 nsed 100038 nsemntd 100039 showfhd 100043 showfh rpc.cmsd 100068 dtcalendar ypxfrd 100069 ypxfr rpc.ttdbserverd 100083 tooltalk pcnfsd 150001 exportmap 200023 prestoctl_svc 390100 presto amd 300019 amq bssd 300433 bss drdd 300434 drd cluinfod 300527 # cluster information server cnxmond 300483 # cluster node monitor cnxagentd 300484 # cluster agent asedirector 395175 asedirector aseagent 395176 aseagent asehsm 395177 asehsm aselogger 395179 aselogger prpasswd 300632
rpcinfo -p
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100011 1 udp 1026 rquotad
100068 2 udp 1027 rpc.cmsd
100068 3 udp 1027 rpc.cmsd
100068 4 udp 1027 rpc.cmsd
100083 1 tcp 1024 rpc.ttdbserverd
NIS is not running.
Mail has not been configured.
MAILLOCKING:
MAIL_CONF:
SENDMAIL_VERSION:
SENDMAIL_ARGS:
mailstats: file size changed.
Mlocal, P=/bin/mail, F=SlsDFMmnu, S=10, R=20, A=mail -r $f -d $u Mprog, P=/bin/sh, F=lsDFM, S=10, R=20, A=sh -c $u Mpop, P=/usr/lib/mh/spop, F=nsmFDM, S=10, R=20, A=pop $u Msmtpl, P=[IPC], F=mDFMuX, S=11, R=21, A=IPC $h, E=\r\n Msmtp, P=[IPC], F=mDFMuXL, S=12, R=22, A=IPC $h, E=\r\n Msmtpr, P=[IPC], F=mDFMuX, S=13, R=23, A=IPC $h, E=\r\n Mmail11, P=/usr/sbin/mail11v3, F=nSX, S=14, R=24/29, Mumc, P=/usr/lib/umc/mr_mailer, F=mnDFMS, R=0, S=0, Muucp, P=/usr/bin/uux, F=sDFhuU, S=15, R=25, M=100000,
Mail queue is empty
The sendmail.cf file contains configuration information for the sendmail daemon.
V2/Digital DDmy.domain DP$D DN$D DW$w Dj$w Dy$A CJDNET ENET DJ$j DEENET DI$j DFD5NET DXNAMESPACE CKmts mr umc DMMTS DU$A Cddnet enet uucp CNdaemon mailer-daemon news nobody pop postmaster rdist root uucp FN/var/adm/sendmail/local.users %[^#] CTUUCP USENET UMC DNET ENET DV1.1.3.6 DnMAILER-DAEMON DlFrom $g $d Do.:%@!^=/[] Dq$?x$x $.<$g> De$j Sendmail $v ($V) $b Oa OA/var/adm/sendmail/aliases Odbackground OF0600 Ou65534 Og65534 OH/usr/share/lib/sendmail.hf OL9 Om OQ/var/spool/mqueue Or1h OS/var/adm/sendmail/sendmail.st Os O/ OT3d Ox20 OX12 Pfirst-class=0 Pspecial-delivery=100 Pjunk=-100 Troot daemon uucp news H?P?Return-Path: <$g> HReceived: by $j id $i; $b H?D?Resent-Date: $a H?D?Date: $a H?F?Resent-From: $q H?F?From: $q H?x?Full-Name: $x HSubject: H?M?Resent-Message-Id: <$t.$i@$j> H?M?Message-Id: <$t.$i@$j> S1 R$+<@$-.UUCP> $2!$1 decapsulate UUCP S2 R$+<@$-.UUCP> $2!$1 decapsulate UUCP S3 R<> $@@ turn into magic token R<@$+:$+>$* @$1:$2 unfocus <route-addr> R$*<@$+>$* $@$>7$1<@$2>$3 idempotency is good R$*<$+>$* $2 basic RFC822 parsing R@$+,$+ @$1:$2 change all "," to ":" R@$+:$+ $@$>7<@$1>:$2 handle <route-addr> R$+:$*;$* $@$1:$2;$3 list syntax R$+@$+ $:$1<@$2> focus on domain R$+<$+@$+> $1$2<@$3> move gaze right R$+@$+<@$+> $1%$2<@$3> a@b@c@d ->a%b%c@d R$+<@$+.$E> $@$>7$1<@$2.$E> already encapsulated IV R$+<@$-.$-.$=J> $:$2.$3::$1 u@aa.nnn.DNET R$+<@$-.$=J> $:$2::$1 u@node.DNET R$+<@$+.$=J> $1<@$2> not IV; try as a V R$+<@.$-.$+> $:.$2.$3::$1 u@.root.path R$+<@$-:.$-.$+> $:$2:.$3.$4::$1 u@ns:.root.path R$+<@%$-> $:%$2::$1 u@%nsap R$+<@$+> $@$>7$1<@$2> now canonical R$-.$-::$+ $@$>7$3<@$1.$2.$E> numeric decnet addr R$-::$+ $@$>7$2<@$1.$E> h::u -> u@h.pseudodom R%$-::$+ $@$>7$2<@$1.$F> %nsap::user R.$-.$+::$+ $:$X:.$1.$2::$3 add default namespace R$-:.$-.$+::$+ $:$4@$3<@$2.$1> ns:.root.path R$+@$-.$+<@$*> $1@$3<@$2.$4> shuffle tokens to end R$+@$-<@$+> $@$>7$1<@$2.$3.$F> last token; remove dot R$-.$+!$+ $@$>7$3<@$1.$2> host.domain!user R$-!$+ $@$>7$2<@$1.UUCP> resolve uucp names R$+%$+ $@$>7$1<@$2> user%host S7 R$*<@$+%$+>$* $1%$2<@$3>$4 move @ right after % R$*<@$+.$E>$* $@$1<@$2.$E.$P>$3 hide .$E under $P R$*<@$+.$F>$* $@$1<@$2.$F.$P>$3 hide .$F under $P R$*<@$+.$=K>$* $@$1<@$2.$M.$P>$4 .$=K -> $M.$P R$+<@POP>$* $@$1<@POP>$2 POP already OK R$*<@$->$* $@$1<@$2.$N>$3 qualify hostnames S4 R@ $@ handle <> error addr R$*<$+>$* $1$2$3 defocus R@$+:$+:$+ @$1,$2:$3 <route-addr> canonical R@$+:$+ $@<@$1:$2> route-addr needs <> S5 R$+ $@$>1$1 same as envelope S6 R$+ $@$>2$1 same as envelope S8 R$+ $:$>3$1 needed for recursions R$*<@$j>$* $:$1<@>$2 @myfqdm R$*<@$=w>$* $:$1<@>$3 @my alias R$*<@$=w.$N>$* $:$1<@>$3 @my alias R$*<@$y.$E.$P>$* $:$1<@>$2 myname:: (IV) R$*<@$y.$F.$P>$* $:$1<@>$2 myname:: (V) R$*<@$U.UUCP>$* $:$1<@>$2 myuucpname! R<@>:$* $@$>8$1 localhost/route-addr R$*<@>$* $@$>8$1$2 localhost S9 R$*<@$->$* $:$1<@$2.$N>$3 qualify R$*<@$+.$=T>$* $@$1<@$2.$3>$4 trash pseudodom, lv aln R$*<@$+.$=T.$P>$* $@$1<@$2.$3.$P>$4 qualified trash, lv aln R$*<@$+>$* $:$1<@$[$2.$]>$3 canon'ize complex names R$*<@$+.>$* $1<@$2>$3 strip trailing dots S0 R@ $#local $:$n handle <> form R$*<@[$+]>$* $#smtp $@[$2] $:$1<@[$2]>$3 numeric internet spec R$*<@$+>$* $:$>8$1<@$2>$3 R$+<@$+.$E.$P> $:$2@@$1<@$2.$E.$P> dup nodename; add @@ R$+@@$+<@$+> $:$?J$1@@$2??$3<@$J>$|$1@@$2<@$3>$. mk @relay or lv alone R$+@@$+??$+<@$j> $#mail11 $@$1 $:$2 them is us; use mail11 R$+@@$+??$+<@$J> $#smtp $@$J $:$2<@$3> undo damage; send now R$+@@$+??$+<@$+> $:$2<@$3> undo $?J damage R$+@@$+<@$+> $:$2<@$3> undo !$?J damage R$+<@$+.$F.$P> $:@@$2@@$1<@$2.$F.$P> dup nodename; add @@ @@ R$*@@$-.$+@@$+ $2.$1@@$3@@$4 slide tokens to left@@ R$+.@@$-@@$+ $2:.$1@@$3 rm 1@@; final reformat R@@$-@@$+ %$1@@$2 rm 1@@; final reformat R$+@@$+<@$+> $:$?I$1@@$2??$3<@$I>$|$1@@$2<@$3>$. mk @relay or lv alone R$+@@$+??$+<@$j> $#mail11 $@$1 $:$2 them is us; use mail11 R$+@@$+??$+<@$I> $#smtp $@$I $:$2<@$3> undo damage; send now R$+@@$+??$+<@$+> $:$2<@$3> undo $?I damage R$+@@$+<@$+> $:$2<@$3> undo !$?I damage R$+<@$+.$=K.$P> $:$?K$1??$2.$M.$P<@$K>$|$1<@$2.$M.$P>$. R$+??$+.$M.$P<@$j> $#umc $@$2 $:$1<@$2> them is us; use mail11 R$+??$+.$M.$P<@$K> $#smtp $@$K $:$1<@$2.$M.$P> undo damage; send now R$*<@$-.UUCP> $#uucp $@$2 $:$2!$1 use our own uucp R$+<@POP> $#pop $@$j $:$1 username@POP R$*<@$*$N>$* $#smtpl $@$2$N $:$1<@$2$N>$3 our domain; no gw R$*<@$*$P>$* $#smtp $@$2$P $:$1<@$2$P>$3 our domain; no gw R$*<@$+>$* $#smtp $@$?R$R$|$2$. $:$1<@$2>$3 R$+ $#local $:$1 must be local Mlocal, P=/bin/mail, F=SlsDFMmnu, S=10, R=20, A=mail -r $f -d $u Mprog, P=/bin/sh, F=lsDFM, S=10, R=20, A=sh -c $u Mpop, P=/usr/lib/mh/spop, F=nsmFDM, S=10, R=20, A=pop $u S10 R@ $n errors to mailer-daemon S20 Msmtpl, P=[IPC], F=mDFMuX, S=11, R=21, A=IPC $h, E=\r\n S11 R$*<@$j>$* $>3$1$2 strip local host name R$*<@$+>$* $:$>9$1<@$2>$3 canonicalize domain R$*<@$+>$* $@$1<@$2>$3 already has an @domain R$+ $@$1<@$j> add our hostname S21 R$+ $@$>11$1 nothing special here Msmtp, P=[IPC], F=mDFMuXL, S=12, R=22, A=IPC $h, E=\r\n S12 R<@$+>$* $@<@$1>$2 <route-addr> syntax R$*<@[$+]>$* $@$1<@[$2]>$3 numeric, lv alone R$*<@$+>$* $@$>9$1<@$2>$3 canonicalize domain R$=N $@$1<@$j> Add $j to local R$- $:$1??$(aliases $1 $: $) Look up aliases R$-??$+ $@$1<@$j> Found it - reformat R$-?? $:$1 undo dammage R$+ $@$1<@$W> fix up return addr S22 R$+ $@$>12$1 nothing special here Msmtpr, P=[IPC], F=mDFMuX, S=13, R=23, A=IPC $h, E=\r\n S13 R$*<@$j>$* $>3$1$2 strip local host name R$*<@$+>$* $:$>9$1<@$2>$3 canonicalize domain R$=N $@$1<@$j> qualify nonhidden users R$- $:$1??$(aliases $1 $: $) Look up aliases R$-??$+ $@$1<@$j> Found it - reformat R$-?? $:$1 undo dammage S23 R$+ $@$>13$1 nothing special here Mmail11, P=/usr/sbin/mail11v3, F=nSX, S=14, R=24/29, A=mail11 $f $x $h S14 R$+ $:$>3$1 Make canonical to convert last % to @ R$+<@$+.$E.$P> $@$2::$1 phaseIV back to :: form R$+<@$-.$F.$P> $@$1@%$2 % form R$+<@$+.$F.$P> $:@@$2@@$1 dup nodename; add @@ @@ R$*@@$-.$+@@$+ $2.$1@@$3@@$4 slide tokens to left@@ R$+.@@$-@@$+ $@$3@$2:.$1 rm 1@@; final reformat S24 R$+ $@$>14$1 nothing special here S29 R$- $@$1@$y tack on our nodename R$+ $@$>14$1 nothing special here Mumc, P=/usr/lib/umc/mr_mailer, F=mnDFMS, R=0, S=0, A=mr_mailer -send -hop $c -from $f -to $u Muucp, P=/usr/bin/uux, F=sDFhuU, S=15, R=25, M=100000, A=uux - $h!rmail ($u) S15 R$*<@$+>$* $@$1<@$2>$3 domain form is ok R$+ $:$>25$1 do unto sender as to recipient R$U!$+ $@$U!$1 already has our node name R$+ $@$U!$1 tack on our hostname. S25 R$*<@$+>$* $@$1<@$2>$3 domain form is ok R$-!$+ $@$1!$2 !-form is ok; done R$+!$+ $@$>3$2<@$1> looks like domain; chg to u@dom
The aliases file contains mail aliases.
MAILER-DAEMON:root postmaster:root nobody: /dev/null
/opt/dcelocal/ not found; DCE is not installed
The ttys, ttysrch gettytab, gettydefs, securettys remote, phones, and acucap file are not displayed because of security reasons
Use the sys_check -all option to display these files.
LAT rc.config settings:
LAT_SETUP: 1
LAT is enabled.
latcp -d
Node name: NODE3 Multicast timer: 60 seconds LAT version: 5 ECO: 2 Outgoing Port Groups: 0 Selected Interface Name(s): ln0 LAT Protocol is active Agent Status: Disabled Maximum Number of Learned Services: 100 Service information Service name: NODE3 Service ID: Digital UNIX Version V4.0 LAT SERVICE Rating: Dynamic 61 Groups: 0
latcp -d -P
No terminal(s) found.
latcp -d -N
LATCP Node Counters
108660 Seconds since last reset 0 Fwd out-of-seq messages
0 Run messages received 0 Retransmitted messages
0 Run messages transmitted 0 Bad circuit messages
0 Slots received 0 Bad circuit slots
0 Slots transmitted 0 Accepted host-initiated
0 Bytes received 0 Rejected host-initiated
0 Duplicate messages 0 Multiple nodes seen
LATCP Node Statistics
0 Circuits created 0 Circuit timeouts
0 Sessions created 1811 Service messages xmit
1849 Frames received 3660 Service messages recv
1811 Frames transmitted 3660 Service messages used
0 Illegal frames
LATCP Node Errors
0 Circuit Start 0 HIC Solicit
0 Circuit Run 0 HIC Response
0 Circuit Halt 0 HIC Command
0 Service Anouncement 0 HIC Status
0 Other Message
latcp -d -C
No virtual circuits established.
The /etc/latstartup.conf file is not available.
ASU ( PATHWORKS ) is not installed on the system.
Baan user was not found.
The /etc/patrol file is not available.
$INFORMIXDIR parameter is not set.
The $INFORMIXDIR variable is not defined, /INFORMIXTMP/.infxdirs does
not exist, or Informix software is not being used on this system.
To gather Informix data, the
$INFORMIXDIR, $ONCONFIG, $INFORMIXSERVER, $INFORMIXSQLHOSTS
variables should be set, or /INFORMIXTMP/.infxdirs should exist.
The /usr/informix directory was not found.
Netscape web server not found.
An /etc/oratab file was not found.
This indicates that an Oracle database is not configured on the system.
Performance Manager is not installed.
The pmgrd daemon is not installed.
The clstrmond daemon is not installed.
Samba was not found.
SAP configuration files were not found.
This indicates that SAP software is not configured on the system.
The $SYBASE variable is not defined.
To gather Sybase data, the $SYBASE variable must be defined.
The /usr/sybase file was not found.